Measurement of Electrophysiological Signals In Vitro Using High-Performance Organic Electrochemical Transistors

Biological environments use ions in charge transport for information transmission. The properties of mixed electronic and ionic conductivity in organic materials make them ideal candidates to transduce physiological information into electronically processable signals. A device proven to be highly successful in measuring such information is the organic electrochemical transistor (OECT). Previous electrophysiological measurements performed using OECTs show superior signal-to-noise ratios than electrodes at low frequencies. Subsequent development has significantly improved critical performance parameters such as transconductance and response time. Here, interdigitated-electrode OECTs are fabricated on flexible substrates, with one such state-of-the-art device achieving a peak transconductance of 139 mS with a 138 µs response time. The devices are implemented into an array with interconnects suitable for micro-electrocorticographic application and eight architecture variations are compared. The two best-performing arrays are subject to the full electrophysiological spectrum using prerecorded signals. With frequency filtering, kHz-scale frequencies with 10 µV-scale voltages are resolved. This is supported by a novel quantification of the noise, which compares the gate voltage input and drain current output. These results demonstrate that high-performance OECTs can resolve the full electrophysiological spectrum and suggest that superior signal-to-noise ratios could be achieved in high frequency measurements of multiunit activity.     

Diporphyrin tweezer for multichannel spectroscopic analysis of enantiomeric excess

Chiral 1,1’-binaphthyl-linked diporphyrin ‘tweezers’ (R)-1/(S)-1 and the corresponding zinc(II) complexes (R)-2/(S)-2 were prepared as chiral host molecules, and their utility for chiral analyses (especially enantiomeric excess (ee) determinations) were evaluated. Tris(1-n-dodecyl)porphyrins were used for the first time as the interacting units. Host capabilities of the diporphyrin tweezers were investigated by titrations with (R,R)- and (S,S)-cyclohexane-1,2-diamine (CHDA). The host molecules could be used as multichannel probes of ee by using UV-vis, circular dichroism (CD), fluorescence emission and ¹H nuclear magnetic resonance (¹H-NMR) methods. Chiral configurations could also be differentiated using CD or ¹H-NMR spectroscopy. All three optical techniques give good resolution of ee with reasonable sensitivity considering the low concentrations used (ca. 10⁻⁶ mol·L⁻¹). The ee determination of CHDA enantiomers using NMR spectroscopy is also possible because of the reasonably well separated resonances in the case of (R,R)- and (S,S)-CHDA. Non-metallated (R)-1/(S)-1 hosts could not be used to detect chiral information in a strongly acidic chiral guest. This work demonstrates the utility of 1,1’-binapthyl-linked chiral hosts for chiral analysis of ditopically interacting enantiomers.     

Charge Density Influences C1 Domain Ligand Affinity and Membrane Interactions

The C1 domain, which represents the recognition motif on protein kinase C for the lipophilic second messenger diacylglycerol and its ultrapotent analogues, the phorbol esters, has emerged as a promising therapeutic target for cancer and other indications. Potential target selectivity is markedly enhanced both because binding reflects ternary complex formation between the ligand, C1 domain, and phospholipid, and because binding drives membrane insertion of the C1 domain, permitting aspects of the C1 domain surface outside the binding site, per se, to influence binding energetics. Here, focusing on charged residues identified in atypical C1 domains which contribute to their loss of ligand binding activity, we showed that increasing charge along the rim of the binding cleft of the protein kinase C δ C1 b domain raises the requirement for anionic phospholipids. Correspondingly, it shifts the selectivity of C1 domain translocation to the plasma membrane, which is more negatively charged than internal membranes. This change in localization is most pronounced in the case of more hydrophilic ligands, which provide weaker membrane stabilization than do the more hydrophobic ligands and thus contributes an element to the structure–activity relations for C1 domain ligands. Coexpressing pairs of C1‐containing constructs with differing charges each expressing a distinct fluorescent tag provided a powerful tool to demonstrate the effect of increasing charge in the C1 domain.     

Clearance angle and evolution of depth of cut in actuated disc cutting

This paper investigates the effect of cutter clearance angle on variation of depth of cut and cutting process with an actuated disc cutting(ADC). ADC is a cyclic cutting method with two main characteristics:(i) a disk-shape cutter is used to attack the rock in an undercutting mechanism; and(ii) the cutter is dynamically actuated as it is moved across the rock. Hence, the cutting process of such system is periodic, each recurrence known as actuation cycle. The first ADC model, developed in 2016, represented an idealization of the technology with a flat disc cutter, where no clearance angle was considered. The evolution of the contact between the disc and the rock was, therefore, computed only on horizontal x-y plane, ignoring the effect of normal component of the force acting on cartridge. This article reports on a study that incorporates the cutter inclination angle in derivation of cutter/rock interface laws. It extends the proposed kinematic and geometry based model to take into account the variable depth of cut in estimating the forces associated with cutting in one actuation cycle. Experiments were conducted using Wobble to test the predictions of the improved model at various operating conditions. The model predictions are matched with the experimental results and effects of various factors are analysed.     

Hydromorphological,hydraulic and ecological effects of restored wood: findings and reflections from an academic partnership approach

Large wood (re)introduction can deliver multiple benefits in river restoration, but there is a dearth of the detailed and longer‐term post‐project monitoring and evaluation required for improving best practice. We present findings from an academic partnership approach to post‐project evaluation, based on successive MSc research projects on restored large wood in the Loddon catchment, UK. Field and modelling data reveal: (i) key differences in large wood features between restored and natural reaches; (ii) increased hydraulic retention and changes to mesohabitats associated with large wood; (iii) differences in macroinvertebrate community composition around large wood but a lack of site‐level effects; (iv) interactions between macrophytes and large wood that may be specific to restored reaches; (v) a need for further field and modelling studies to inform the accurate representation of large wood in hydraulic models. Some key challenges in partnership working are identified to aid planning and effectiveness of future collaborations.     

Phosphorus concentrations in the River Dun, the Kennet and Avon Canal and the River Kennet, southern England

Variations in phosphorus (P) concentrations in an agriculturally impacted river draining a Chalk aquifer and an associated canal in the west of the Thames Basin, southern England are examined and linked to agricultural and sewage sources and within river/canal process controls. The study area comprises the River Dun, the adjacent River Kennet and the Kennet and Avon (K&A) Canal. Large seasonal variations are observed for soluble reactive phosphorus (SRP) and dissolved silicon (Si) with low concentrations in the spring and summer times when biological activity is high. The K&A Canal shows the largest SRP and Si concentration declines. This reflects high biological activity coupled with higher temperatures and higher water residence times. The extent of SRP removal is examined in relation to organic (uptake/release with phytoplankton growth/decay) and, to a lesser extent, inorganic (SRP coprecipitation with calcite) mechanisms. Boron (B) is used as a tracer of sewage sources. Agricultural inputs of both dissolved and particulate P (PP) can be important particularly under conditions where the catchment is wet and near surface/overland flow is important: sewage treatment works effluent and septic tank discharges to groundwater also probably provide a major component of the SRP occurring within the water column. The canal, and to a lesser extent the river, acts as sink for P in sewage effluent sources due to the high biological activity especially during the spring and summer. The aquifer probably acts as a major sink for agricultural and septic tank inputs of P.     

Source water quality effects on monochloramine inactivation of adenovirus, coxsackievirus, echovirus, and murine norovirus

There is a need for more information regarding monochloramine disinfection efficacy for viruses in water. In this study, monochloramine disinfection efficacy was investigated for coxsackievirus B5 (CVB5), echovirus 11 (E11), murine norovirus (MNV), and human adenovirus 2 (HAdV2) in one untreated ground water and two partially treated surface waters. Duplicate disinfection experiments were completed at pH 7 and 8 in source water at concentrations of 1 and 3 mg/L monochloramine at 5 and 15 °C. The Efficiency Factor Hom (EFH) model was used to calculate CT values (mg-min/L) required to achieve 2-, 3-, and 4-log₁₀ reductions in viral titers. In all water types, monochloramine disinfection was most effective for MNV, with 3-log₁₀ CT values at 5 °C ranging from 27 to 110. Monochloramine disinfection was least effective for HAdV2 and E11, depending on water type, with 3-log₁₀ CT values at 5 °C ranging from 1200 to 3300 and 810 to 2300, respectively. Overall, disinfection proceeded faster at 15 °C and pH 7 for all water types. Inactivation of the study viruses was significantly different between water types, but there was no indication that overall disinfection efficacy was enhanced or inhibited in any one water type. CT values for HAdV2 in two types of source water exceeded federal CT value recommendations in the US. The results of this study demonstrate that water quality impacts the inactivation of viruses and should be considered when developing chloramination plans.