排序方式: 共有63条查询结果,搜索用时 15 毫秒
1.
Pulse tube refrigerators do not have moving parts in the cold section, and they have low vibration, high reliability, and long life. The expander in refrigerators typically has an inverted U or coaxial shape because this attains a wider absorber area, lower height, and compactness. However, the performance of a Stirling-type pulse tube refrigerator is inferior to that of a Stirling refrigerator. Cooling characteristics of the pulse tube refrigerator greatly depend on the shape of the expander. In this study, an inertance-type refrigerator, which uses ambient air for the working gas, was developed to examine the effect of expander shape. This refrigerator model with changeable expander operated with a Stirling cycle, and it was composed of a reciprocating compressor, after-cooler, regenerator, absorber, pulse tube, hot-end, and inertance tube with reservoir. The following expander shapes were tested: in-line, L shape, L-L shape, and coaxial shape. The effect of expander shape on cooling capacity was examined experimentally and numerically using the model pulse tube refrigerator. The results of experiments showed that the L shape expander had the highest performance and the coaxial expander had the lowest performance. In addition, the characteristics of the gas flow in each expander were confirmed by fluid dynamics analysis. 相似文献
2.
The sliding wear behaviour of several compositions of Fe-, Co- and Ni-based metallic glasses have been studied while rubbing
against AISI 52100 bearing steel under reciprocating-sliding conditions. The wear resistances of Fe-based metallic glasses
and Ni-based metallic glass (MBF 50) have been found to be superior to that of the mating AISI 52100 bearing steel. The examination
of worn surfaces indicates that the superior wear resistance of metallic glasses is not merely owing to their high hardness
but it is determined by phenomena of material transfer vis-à-vis the mating material and the formation of protective oxide
layers on the metallic-glass surface during sliding.
This revised version was published online in August 2006 with corrections to the Cover Date. 相似文献
3.
K Kawahara K Inutsuka M Hiratsuka S Makihata K Okabayashi T Shiraishi T Shirakusa 《Canadian Metallurgical Quarterly》1998,116(3):397-401
Subcellular localisation of xanthine oxidoreductase (XOR) was determined by indirect immunofluorescence using confocal microscopy in human endothelial and epithelial cell lines and in primary cultures of human umbilical vein endothelial cells. XOR was diffusely distributed throughout the cytoplasm but with higher intensity in the perinuclear region. In non-permeabilised cells, XOR was clearly seen to be asymmetrically located on the outer surfaces, showing, in many cases, a higher intensity on those faces apposed by closely neighbouring cells. Such specific distribution suggests a functional role for the enzyme in cell-cell interactions, possibly involving signalling via reactive oxygen species. 相似文献
4.
5.
Ken Sasaki Hiroshi Hiratsuka & Kenji Takeno 《International Journal of Food Science & Technology》2006,41(4):425-434
Relatively large changes in the indicators of water quality, such as pH, hardness, and bicarbonate content, were observed during electromagnetic heating of pans of different tap waters and compared with pans heated by liquid natural gas (LNG) or liquid petroleum gas (LPG). For example, the pH and hardness of Hiroshima tap water were increased from 7.35 to 9.27 and from 19.0 to 35.7 mg L?1, respectively, during 20 min of electromagnetic heating. When tap water from Tokyo was subjected to electromagnetic heating, the water hardness of 74.2 mg L?1 was increased by 52% after 20 min of heating. Such water quality changes were observed consistently in several tap water samples across Japan. These changes showed a close correlation with rates of temperature increase. It was suggested that mineral components (Ca and Mg), which were attached on the stainless steel surface of the pans might be released into the tap water with high calorific heating. 相似文献
6.
M Kameyama K Murata T Tsugawa T Yasuda H Nakano H Ohigashi M Hiratsuka Y Sasaki T Kabuto O Ishikawa H Furukawa S Imaoka 《Canadian Metallurgical Quarterly》1998,25(9):1385-1387
The aim of this study was to determine whether chemo-endocrine therapy after the resection of liver metastasis from colorectal cancer would prevent recurrence in the remnant liver and prolong survival. Eleven colorectal cancer patients underwent hepatic resection for liver metastasis. Subsequently, they were administered Proglumide gastrin antagonist 1,200 mg/day + 5'-DFUR 800 mg/day for 2 years. In seven of them, MMC 6-10 mg and ADM 20 mg were infused intra-arterially every two weeks alternately for one year. In four of them, 5-FU 250 mg/day was infused for seven days continuously intra-arterially every two weeks for one year. Recurrence in the remnant liver occurred in four of 11 patients. All of these patients underwent repeated hepatectomy. The mean disease-free survival in the remnant liver was 37 months and the five-year survival rate was 91%. These results indicate that intra-arterial chemotherapy with gastrin receptor antagonist might be effective for adjuvant therapy in patients with resectable liver metastasis from colorectal cancer. 相似文献
7.
8.
S Nakamori H Furukawa M Hiratsuka T Iwanaga S Imaoka O Ishikawa T Kabuto Y Sasaki M Kameyama S Ishiguro T Irimura 《Canadian Metallurgical Quarterly》1997,15(2):816-825
PURPOSE: The prognostic value of the altered expression of carbohydrate antigens sialyl Le(a) (sLe(a)) and sialyl Le(x) (sLe(x)), which have been implicated as functional ligands in heterotypic-cell-adhesion systems in the multistep process of tumor metastasis, were evaluated. PATIENTS AND METHODS: The level of expression of sLe(a) and sLe(x) antigens was examined immunohistochemically in paraffin-embedded tumor samples from 137 patients who underwent resection for gastric cancer. Correlation between the antigens' expression, various established clinicopathologic factors, and prognosis were studied by univariate and multivariate analysis. RESULTS: Tumors that were positive for the sLe(a) antigen were significantly more likely to be large (P = .035), to be localized at the proximal third of the stomach (P = .018), to have an infiltrate appearance (P = .013), to have an invasive mode both in depth of invasion (P = .028) and in lymphatic invasion (P = .002), and to be classified as late stage (P = .011) than those that were negative for sLe(a), whereas the sLe(x) antigen status was not correlated with any clinicopathologic factors. The overall survival of patients with an sLe(a)-antigen-positive tumor was significantly poorer than that of those with an sLe(a)-antigen-negative tumor (P = .0001). Survival within each pathologic stage differed also (stage I, P = .030; stage II, P = .046; stage III, P = .026, respectively). A Cox regression analysis with multiple covariates showed that positive sLe(a) antigen status was an independent prognostic factor for a worse outcome in patients with gastric cancer. According to the mode of recurrence, increased sLe(a) antigen expression significantly affected both peritoneal dissemination and liver metastasis. CONCLUSION: Increased expression of the sLe(a) antigen may serve as a potent prognostic indicator for recurrence in patients with gastric cancer. Careful follow-up and intensive therapy are required for patients with an sLe(a)-antigen-positive gastric cancer. 相似文献
9.
Kojima K Hiratsuka A Suzuki H Yano K Ikebukuro K Karube I 《Analytical chemistry》2003,75(5):1116-1122
An electrochemical protein chip was microfabricated. A thin-film three-electrode system, including an array of 36 platinum working electrodes, a set of thin-film Ag/AgCl electrodes, and platinum auxiliary electrodes, was integrated on a glass substrate. Capture antibodies were immobilized in a 4.5-nm-thick double layer of a hexamethyldisiloxane plasma-polymerized film. Because of their highly cross-linked network structure, the capture antibodies could be firmly immobilized. No nonspecific adsorption was observed during a series of procedures to detect target proteins, and electrochemical cross talk between neighboring sites was negligible. The sandwich immunoassay was conducted on a single chip using model proteins, alpha-1-fetoprotein and beta2-microglobulin. A distinct current increase following the oxidation of hydrogen peroxide produced by the enzymatic reaction of glucose oxidase was observed, which indicates that the capture proteins could actually bind the target proteins. Two kinds of protein were detected independently on multiple sites with respective capture antibodies. 相似文献
10.
Hiratsuka A Kinoshita H Maruo Y Takahashi K Akutsu S Hayashida C Sakairi K Usui K Shiseki K Inamochi H Nakada Y Yodoya K Namatame I Unuma Y Nakamura M Ueyama K Ishii Y Yano K Yokoyama K 《Analytical chemistry》2007,79(15):5730-5739
We developed a fully automated electrophoresis system for rapid and highly reproducible protein analysis. All the two-dimensional (2D) electrophoresis procedures including isoelectric focusing (IEF), on-part protein staining, sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), and in situ protein detection were automatically completed. The system comprised Peltiert devices, high-voltage generating devices, electrodes, and three disposable polymethylmethacrylate (PMMA) parts for IEF, reaction chambers, and SDS-PAGE. Because of miniaturization of the IEF part, rapid IEF was achieved in 30 min. A gel with a tapered edge gel on the SDS-PAGE part realized a connection between the parts without use of a gluing material. A biaxial conveyer was employed for the part relocation, sample introduction, and washing processes to realize a low-maintenance and cost-effective automation system. Performances of the system and a commercial minigel system were compared in terms of detected number, resolution, and reproducibility of the protein spots. The system achieved high-resolution comparable to the minigel system despite shorter focusing time and smaller part dimensions. The resulting reproducibility was better or comparable to the performance of the minigel system. Complete 2D separation was achieved within 1.5 h. The system is practical, portable, and has automation capabilities. 相似文献