An experimental pilot study of tacalcitol activities during modulation of parakeratotic skin features

Establishing guidelines and experimental models preclinical and clinical evaluations of new agents for treatment, and/or prevention of human diseases has become a task of crucial importance. Psoriasis is such one disease holding great interest for dermatology owing to its high rate of incidence and complexity of treatment. However the absence of psoriatic lesions in animals and the inability to induce them, calls for experimental techniques both in vitro and in vivo. The purpose of this study was to evaluate experimentally the effects of tacalcitol on cell proliferation and differentiation process. Thereafter a human pilot study on psoriatic patients has been developed.     

Hybrid photocatalytic membranes embedding decatungstate for heterogeneous photooxygenation

The incorporation of decatungstate in polymeric membranes provides new heterogeneous photocatalysts for the oxidation of organic substrates under oxygen atmosphere at 25 °C. Photocatalytic membranes have been prepared yielding polymeric films with a high thermal, chemical and mechanical stability (PVDF, PDMS, Hyflon). Surface spectroscopy techniques including transmittance and reflectance UV-Vis and FT-IR have been used to assess the photocatalyst integrity within the polymeric support. Catalyst screening has been performed under both homogeneous and heterogeneous photooxygenation conditions. The photocatalyst activity has been evaluated in terms of the substrate conversion, turnover numbers, and recycling experiments. A membrane induced selectivity behavior has been evidenced by comparison with homogeneous oxidations.     

FreesoundVR: soundscape composition in virtual reality using online sound repositories

Virtual Reality - The intersection between sound and music computing and Virtual Reality (VR) has grown significantly over the past decades, amounting to an established area of research today....     

A sampling approach to Debiasing the offline evaluation of recommender systems

Journal of Intelligent Information Systems - Offline evaluation of recommender systems (RSs) mostly relies on historical data, which is often biased. The bias is a result of many confounders that...     

Single crystal silicon nanopillars, nanoneedles and nanoblades with precise positioning for massively parallel nanoscale device integration

Arrays of precisely positioned single crystal silicon nanopillars, nanoneedles, and nanoblades with minimum feature sizes as small as 30 nm are fabricated using entirely scalable top-down fabrication techniques. Using the same scalable technologies, devices consisting of electrically connected silicon nanopillars with multiple addressable electrodes for each nanostructure are realized. The arrays of nanopillars, nanoneedles, and nanoblades are shown to exhibit Raman signal enhancement on 1,2-benzenedithiol monolayers, opening a path to nanodevices that manipulate, position, detect and analyze molecules.     

Morphological,Electrical, and Chemical Changes in Cyclically Contacting Polycrystalline Silicon Surfaces Coated with Perfluoroalkylsilane Self-Assembled Monolayer

The evolution of morphology, electrical properties, and chemical composition has been studied in cyclically contacting polycrystalline silicon (polysilicon) surfaces coated with perfluoroalkylsilane self-assembled monolayer (SAM). The microinstrument used is a MEMS cantilever that is repeatedly actuated out-of-plane to impact a landing pad and is then moved in-plane to enable nondestructive in situ inspection of the impacted area. Analyses show that a device with a monolayer coating exhibits signs of surface degradation after a much higher number of cycles than its uncoated counterpart. A sharp increase in contact resistance between the cantilever and landing pad is observed at ~10 billion cycles for a coated device, versus ~25 million cycles for an uncoated device. Likewise, the onset of grain fracture in the landing pad occurs at ~25 billion cycles for the SAM-coated device, versus ~3 billion cycles for its uncoated counterpart. The effectiveness of the monolayer coating diminishes after more than 100 billion contact cycles as the SAM layer is removed, and the polysilicon substrate becomes susceptible to adhesive wear.     

Nonenzymatic glucose sensing based on deposited palladium nanoparticles on epoxy-silver electrodes

A new approach for nonenzymatic glucose sensing, based on a simple modification of epoxy-silver surfaces deposited on the tip of commercial copper electric wires, is presented. Palladium was galvanically displaced on the surface of the epoxy-silver surface in order to obtain metal nanoparticles that act as catalyst for the direct oxidation of glucose. Scanning electron microscopy revealed the formation of the metal nanoparticles. X-ray photoelectron spectroscopy confirmed the metallic nature of the formed nanostructures on the surface. Electrochemical characterization and calibration of the palladium-modified epoxy-silver electrode is reported, obtaining a linear range of 1–20 mM for the detection of glucose with low interference of ascorbic acid and uric acid. A simple 3-step coulometry was used as the detection technique. The developed sensing material is believed to be a great candidate for integration in small devices for clinical essays, due to the simplicity and cost effectiveness of the presented approach, compared to the state-of-the-art devices reported recently in the literature. Simplicity in the coulometry determinations makes these Pd-modified epoxy-silver sensors a good candidate for easy glucose determinations.     

Functionalization of Scanning Force Microscopy Cantilevers via Galvanic Displacement Technique

A galvanic displacement technique is used to coat silicon scanning force microscopy cantilevers with copper. The copper coating is characterized using X-ray photoelectron spectroscopy, scanning force microscopy, contact angle measurements, scanning electron microscopy and energy-dispersive X-ray spectroscopy. This coating technique results in uniform, reflective and conformal films and hence, no stress-induced bending of the cantilever is observed. To demonstrate the effectiveness of this approach for tribological studies, the coated cantilevers are chemically modified with alkanethiol monolayers in order to functionalize the cantilevers. The effect of changed surface energy are detected with adhesion measurements in water and ethanol.