ANT-colony based disjoint set assortment in wireless sensor networks

Wireless Networks - Wireless sensor network (WSN) consists of small sized devices containing different sensors to monitor physical, environmental and medical conditions during surveillance of...     

Characterization and modeling of a noncollinearly phase-matchedfemtosecond optical parametric oscillator based on KTA and operating tobeyond 4 μm

We describe the design and operation of a critically phase-matched femtosecond optical parametric oscillator based on KTA. By employing a small pump-signal noncollinear angle, tuning of the idler to beyond 4 μm is achieved using a Ti:sapphire pump laser. A Gaussian-beam model is described which can be used to identify the optimal noncollinear phase-matching geometry. Idler and signal pulses are characterized fully both temporally and spectrally and interferometric autocorrelation data at 3.5 μm showing idler pulses of only eight optical cycles duration are presented     

Monotonic and cyclic oedometer tests on sand at high stress levels

In this paper, one-dimensional compression behavior of uniformly graded fine sand is studied with the use of oedometer test at elevated stress levels. To reach the elevated stress levels, testing is performed in a strain controlled manner. In addition, standard stress controlled testing method is also used at lower stress levels for the purpose of comparison. Specimens prepared with initial relative densities ranging from loose to dense are subjected to normal loading as well as hysteretic and repeated loading patterns. Results showed that there is a linear relationship between compressibility index and relative density. The magnitude of compression is mainly influenced by inundation where the compressibility behavior is found to be depending on the initial formation density. Regardless of the initial formation density, convergence to a similar compression index is observed with the hysteretically loaded samples whereas a continuous modification was obtained with repetitively loaded reformed specimens.     

Performance evaluation of cloud computing platforms using statistical methods

Cloud computing is a very attractive research topic. Many studies have examined the infrastructure as a service and software as a service aspects of cloud computing; however, few studies have focused on platform as a service (PaaS). According to recent reports, demand for enterprise PaaS solutions will increase continuously. However, different sectors require different types of PaaS applications and computing resources. Therefore, an evaluation and ranking framework for PaaS solutions according to application needs is required. To address this need, this study presents the most essential aspects of PaaS solutions and provides a framework for evaluating the performance of PaaS providers. It also proposes a suitable set of benchmarking algorithms that can help determine the most appropriate PaaS provider based on different resource needs and application requirements. Performance evaluations of three well-known cloud computing PaaS providers were conducted using the analytic hierarchy process and the logic scoring of preference methods.     

不去健身房 锻炼随时随地

现代医学定义了一个健康的边缘状态,称之为"亚健康",所谓亚健康可以简单地理解为:各个生理指标虽然正常,但却有病症感觉,有潜在的发病倾向。而作为城市中快节奏生活的白领一族,拼命工作,熬夜加班,缺少锻炼,正是被亚健康状态深深困扰的一群人。     

Alpha Fusion Adversarial Attack Analysis Using Deep Learning

The deep learning model encompasses a powerful learning ability that integrates the feature extraction, and classification method to improve accuracy. Convolutional Neural Networks (CNN) perform well in machine learning and image processing tasks like segmentation, classification, detection, identification, etc. The CNN models are still sensitive to noise and attack. The smallest change in training images as in an adversarial attack can greatly decrease the accuracy of the CNN model. This paper presents an alpha fusion attack analysis and generates defense against adversarial attacks. The proposed work is divided into three phases: firstly, an MLSTM-based CNN classification model is developed for classifying COVID-CT images. Secondly, an alpha fusion attack is generated to fool the classification model. The alpha fusion attack is tested in the last phase on a modified LSTM-based CNN (CNN-MLSTM) model and other pre-trained models. The results of CNN models show that the accuracy of these models dropped greatly after the alpha-fusion attack. The highest F1 score before the attack was achieved is 97.45 And after the attack lowest F1 score recorded is 22%. Results elucidate the performance in terms of accuracy, precision, F1 score and Recall.     

Wet Chemical Treatment and Mg Doping of p-InP Surfaces for Ohmic Low-Resistive Metal Contacts

Manufacturing a low-resistive Ohmic metal contact on p-type InP crystals for various applications is a challenge because of the Fermi-level pinning via surface defects and the diffusion of p-type doping atoms in InP. Development of wet-chemistry treatments and nanoscale control of p-doping for InP surfaces is crucial for decreasing the device resistivity losses and durability problems. Herein, a proper combination of HCl-based solution immersion, which directly provides an unusual wet chemical-induced InP(100)c(2 × 2) atomic structure, and low-temperature Mg-surface doping of the cleaned InP before Ni-film deposition is demonstrated to decrease the contact resistivity of Ni/p-InP by the factor of 10 approximately as compared to the lowest reference value without Mg. Deposition of the Mg intermediate layer on p-InP and postheating of Mg/p-InP at 350 °C, both performed in ultrahigh-vacuum (UHV) chamber, lead to intermixing of Mg and InP elements according to X-ray photoelectron spectroscopy. Introducing a small oxygen gas background (O₂ ≈ 10⁻⁶ mbar) in UHV chamber during the postheating of Mg/p-InP enhances the indium outdiffusion and provides the lowest contact resistivity. Quantum mechanical simulations indicate that the presence of InP native oxide or/and metal indium alloy at the interface increases In diffusion.     

Distance functions and skeletal representations of rigid and non-rigid planar shapes

Shape skeletons are fundamental concepts for describing the shape of geometric objects, and have found a variety of applications in a number of areas where geometry plays an important role. Two types of skeletons commonly used in geometric computations are the straight skeleton of a (linear) polygon, and the medial axis of a bounded set of points in the k-dimensional Euclidean space. However, exact computation of these skeletons of even fairly simple planar shapes remains an open problem.In this paper we propose a novel approach to construct exact or approximate (continuous) distance functions and the associated skeletal representations (a skeleton and the corresponding radius function) for solid 2D semi-analytic sets that can be either rigid or undergoing topological deformations. Our approach relies on computing constructive representations of shapes with R-functions that operate on real-valued halfspaces as logic operations. We use our approximate distance functions to define a new type of skeleton, i.e, the C-skeleton, which is piecewise linear for polygonal domains, generalizes naturally to planar and spatial domains with curved boundaries, and has attractive properties. We also show that the exact distance functions allow us to compute the medial axis of any closed, bounded and regular planar domain. Importantly, our approach can generate the medial axis, the straight skeleton, and the C-skeleton of possibly deformable shapes within the same formulation, extends naturally to 3D, and can be used in a variety of applications such as skeleton-based shape editing and adaptive motion planning.