Corrosion and mechanical properties of plasma electrolytic oxidation‐coated AZ80 magnesium alloy

Plasma electrolytic oxidation (PEO) coatings were produced on AZ80 magnesium alloy in a solution containing silicates and phosphates and working at high current densities with short treatment times. The effect of a sealing treatment in boiling water on corrosion and mechanical properties of the coatings were investigated. Moreover, the corrosion mechanism of the samples with and without the sealing treatment was evaluated. The microstructure of the coatings was characterized with scanning electron microscope observation and X‐ray diffraction analysis. The mechanical properties were evaluated with nanoindentation tests and the corrosion resistance was studied by potentiodynamic polarization, electrochemical impedance spectroscopy, and scanning vibrating electrode technique. The results showed that the sealing did not influence the microstructure and the mechanical properties of the samples and instead produced a remarkable increase in the corrosion resistance. The crevice corrosion, present in the sample without the sealing, was avoided with the treatment in boiling water.     

Assessing the Antimicrobial Activity of Polyisoprene Based Surfaces

There has been an intense research effort in the last decades in the field of biofouling prevention as it concerns many aspects of everyday life and causes problems to devices, the environment, and human health. Many different antifouling and antimicrobial materials have been developed to struggle against bacteria and other micro- and macro-organism attachment to different surfaces. However the “miracle solution” has still to be found. The research presented here concerns the synthesis of bio-based polymeric materials and the biological tests that showed their antifouling and, at the same time, antibacterial activity. The raw material used for the coating synthesis was natural rubber. The polyisoprene chains were fragmented to obtain oligomers, which had reactive chemical groups at their chain ends, therefore they could be modified to insert polymerizable and biocidal groups. Films were obtained by radical photopolymerization of the natural rubber derived oligomers and their structure was altered, in order to understand the mechanism of attachment inhibition and to increase the efficiency of the anti-biofouling action. The adhesion of three species of pathogenic bacteria and six strains of marine bacteria was studied. The coatings were able to inhibit bacterial attachment by contact, as it was verified that no detectable leaching of toxic molecules occurred.     

Effects of cathodic electrodeposition parameters of cerium oxide film on the corrosion resistance of the 2024 Al alloy

Cerium oxide thin films obtained by cathodic electrodeposition on 2024 aluminium alloy have been studied. The coatings, obtained with electrochemical deposition, offer an effective corrosion protection and require a lower deposition time when compared to chemical conversion coatings. The coatings were obtained at room temperature by deposition from CeCl₃/H₂O₂ aqueous solutions and the influence of several parameters (CeCl₃ concentration, H₂O₂ concentration, deposition time, current intensity) on the corrosion resistance was studied. The composition, morphology and microstructure of the films have been characterized by SEM, XPS and AFM. The corrosion resistance was investigated through potentiodynamic tests in 3% NaCl solution.     

A coarse-grain reconfigurable architecture for multimedia applications featuring subword computation capabilities

This paper presents the design and the implementation of a coarse-grain reconfigurable machine used as an accelerator for a programmable RISC core, to speed up the execution of computationally demanding tasks like multimedia applications. We created a VHDL model of the proposed architecture and implemented it on a FPGA board for prototyping purposes; then we mapped on our architecture some DSP and image processing algorithms as a benchmark. In particular, we provided the proposed architecture with subword computation capabilities, which turns out to be extremely effective especially when dealing with image processing algorithms, achieving significant benefits in terms of speed and efficiency in resource usage. To create the configuration bitstream (configware) we created a tool based on a graphical user interface (GUI) which provides a first step towards the automation of the programming flow of our design: the tool is meant to ease the life of the programmer, relieving him from the burden of calculating the configuration bits by hand. Synthesis results indicate that the area occupation and the operating frequency of our design are reasonable also when compared to other similar design. In addition to this, the amount of clock cycles taken by our machine to perform a given algorithm is orders of magnitude smaller than the one required by a corresponding software implementation on a RISC microprocessor.     

Effect of HCl pre-treatment on corrosion resistance of cerium-based conversion coatings on magnesium and magnesium alloys

The corrosion protection afforded by a cerium conversion coating, formed by immersion in a solution containing rare earth salt and hydrogen peroxide, on pure magnesium and two magnesium alloys, AZ91 and AM50, has been studied. The effect of HCl pre-treatments on the morphology and on the corrosion resistance of the cerium conversion layer was investigated. A thicker and more homogeneous distribution of the conversion coating was obtained when the sample surface was pre-treated with acid. Higher amounts of cerium on the surface of the pre-treated samples were detected. The cerium conversion coating increased the corrosion resistance of the alloys because it ennobled the corrosion potential and decreased both the anodic and cathodic current. The acid pre-treatment further increased the corrosion resistance of the coated alloys. After five days of immersion in chloride environment the untreated samples showed localized corrosion while the chemical conversion coated samples appeared unaffected.     

Hygrothermal aging of rubber‐modified and mineral‐filled dicyandiamide‐cured DGEBA epoxy resin. III. Dielectric spectroscopy investigation

The effects of moisture absorption on the dielectric properties of a rubber‐modified, mineral‐filled, epoxy resin based on the diglycidyl ether of bisphenol A cured with dicyandiamide are reported. Samples of the resin were aged by immersing in deionized water, or 5% w/w NaCl solution, at elevated temperatures. Dielectric measurements were carried out over the frequency range 10^?1 to 6 × 10⁵ Hz. A featureless dielectric spectrum was observed with both real and imaginary dielectric permittivity increasing with the amount of absorbed water. The change in the dielectric properties with absorption of water was independent of presence of salt, temperature of exposure, and aging history, although a hysteresis of the hydration–dehydration process was observed at low frequencies. Two types of absorbed water were observed—water molecularly dispersed within the epoxy matrix and clustered water in spherical microcavities. The time dependence of the real dielectric permittivity measured at 10 kHz was found to closely resemble that of the water absorption, which allowed the activation energy of diffusion to be calculated from both dielectric and gravimetric data. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1011–1024, 2002; DOI 10.1002/app.10368     

X-Ray Scattering Studies of HgSe Nanoclusters in Zeolite

Structural studies done on HgSe nanoclusters fabricated in the pores of two types of zeolite frameworks, LTL (tubular pore) and Nd-Y (nearly spherical pore), are presented. Nanoclusters were synthesized in these zeolite frameworks via chemical vapor deposition. Anomalous X-ray scattering (AXS) studies were performed on both HgSe/zeolite-Y and HgSe/zeolite-L systems. As a result, we present two distinct structural models for NdY/HgSe and LTL/HgSe systems. A remarkable feature present in our X-ray diffraction (XRD) patterns, diffuse scattering, will also be discussed using our initial results of the atomic pair distribution function (PDF) studies. X-ray structural work is complemented using the results of optical and Raman studies. This article is based on a presentation given in the symposium entitled “Neutron and X-Ray Studies for Probing Materials Behavior,” which occurred during the TMS Spring Meeting in New Orleans, LA, March 9–13, 2008, under the auspices of the National Science Foundation, TMS, the TMS Structural Materials Division, and the TMS Advanced Characterization, Testing, and Simulation Committee.     

Person identification using multiple cues

This paper presents a person identification system based on acoustic and visual features. The system is organized as a set of non-homogeneous classifiers whose outputs are integrated after a normalization step. In particular, two classifiers based on acoustic features and three based on visual ones provide data for an integration module whose performance is evaluated. A novel technique for the integration of multiple classifiers at an hybrid rank/measurement level is introduced using HyperBF networks. Two different methods for the rejection of an unknown person are introduced. The performance of the integrated system is shown to be superior to that of the acoustic and visual subsystems. The resulting identification system can be used to log personal access and, with minor modifications, as an identity verification system