Transesterification of Palm-based Methyl Palmitate into Esteramine Catalyzed by Calcium Oxide Catalyst

The technology for transesterification reactions between methyl esters and alcohols is well established by using classical homogeneous alkaline catalysts, which provide high conversion of methyl esters to specialty or nonindigenous esters. However, in certain products where the purity of the esters is of concern, the removal of homogeneous catalysts after the completion of the reaction is a challenge in terms of production cost and water footprint. Therefore, a study to investigate the potential of heterogeneous catalysts was conducted on reactions between methyl palmitate and triethanolamine. The degree of basicity and active surface area of calcium oxide (CaO), zinc oxide (ZnO), and magnesium oxide (MgO) were first characterized by using temperature-programmed desorption (TPD-CO₂) and Brunauere–Emmett–Teller (BET), respectively. Among the metal oxides investigated, the CaO catalyst showed the best catalytic activity toward the transesterification process as it gave the highest conversion of methyl palmitate and yielded fatty esteramine compositions similar to the conventional homogeneous catalyst. The optimum transesterification condition by using the CaO catalyst utilized a lower vacuum system of approximately 200 mbar, which could minimize a considerable amount of energy consumption. Furthermore, low CaO dosage of 0.1% was able to give a conversion of 94.5% methyl ester and formed esteramine at 170 °C for 2 h. Therefore, the production of esterquats from esteramine may become more economically feasible through the methyl ester route by using the CaO catalyst, which can be recycled three times.     

Uptake of Nickel(II) Ion by Silica-o-Phenylenediamine Derived from Rice Husk Ash

Silicon - The silica-ortho-phenylenediamine(RHAOPDA) derived from Rice Husk Ash and o- phenylenediamine (OPDA) were synthesized. The prepared material was characterized by different techniques; N2-...     

Catalytic oxidative desulfurization of gasoline using phosphotungstic acid supported on MWW zeolite

Catalysts for the desulfurization of gasoline samples were synthesized via the immobilization of well-dispersed phosphotungstic acid (HPW) on Mobil composition of matter-twenty-two (MWW) zeolite. Characterization results indicated that these catalysts possess a mesoporous structure with the retention of the Keggin structure of immobilized HPW. Relevant reaction parameters influencing sulfur removal were systematically investigated, including HPW loading, catalyst dosage, temperature, initial S-concentration, molar ratio of oxidant to sulfide (O/S), volume ratio of MeCN to model oil (Ext./oil), and sulfide species. The 40 wt-% HPW/MWW catalyst exhibited the highest catalytic activity with 99.6% dibenzothiophene sulfur removal from prepared samples. The 40 wt-% HPW/MWW catalyst was recycled four times and could be easily regenerated. Finally, as an exploratory study, straight-run-gasoline and fluid catalytic cracking gasoline were employed to accurately evaluate the desulfurization performance of 40 wt-% HPW/MWW. Our research provides new insights into the development and application of catalysts for desulfurization of gasoline.     

Towards sustainable smart IoT applications architectural elements and design: opportunities,challenges, and open directions

The Journal of Supercomputing - The convergence initiatives of cloud technology and the Internet of Things (IoT) have demonstrated a massive rise of the futuristic technologies which ensure...     

Evaluation of alumina reinforced oil fly ash composites prepared by spark plasma sintering

The thermomechanical behavior of micro/nano-alumina (Al₂O₃) ceramics reinforced with 1-5 wt.% of acid-treated oil fly ash (OFA) was investigated. Composites were sintered using spark plasma sintering (SPS) technique at a temperature of 1400°C by applying a constant uniaxial pressure of 50 MPa. It was evaluated that the fracture toughness of micro- and nanosized composites improved in contrast with the monolithic alumina. Highest fracture toughness value of 4.85 MPam^1/2 was measured for the nanosized composite reinforced with 5 wt.% OFA. The thermal conductivity of the composites (nano-/microsized) decreased with the increase in temperature. However, the addition of OFA (1-5 wt.%) in nanosized alumina enhanced the thermal conductivity at an evaluated temperature. Furthermore, a minimum thermal expansion value of 6.17 ppm*K⁻¹ was measured for nanosized Al₂O₃/5 wt.% OFA composite. Microstructural characterization of Al₂O₃-OFA composites was done by x-ray diffraction and Raman spectroscopy. Oil fly ash particles were seen to be well dispersed within the alumina matrix. Moreover, the comparative analysis of the nano-/microsized Al₂O₃/OFA composites shows that the mechanical and thermal properties were improved in nanosized alumina composites.     

Modelling study of an upflow microbial fuel cell catalysed with anaerobic aged sludge

An electrochemical model for an upflow dual-chambered microbial fuel cell (MFC) process is proposed in this study. The model was set up on the basis of the experimental results and the analysis of biochemical and electrochemical processes in the MFC biocatalysed with anaerobic aged sludge and alternatively fuelled with a synthetic acetate-based and actual domestic wastewaters. Simulation of the process shows that the model describes the process reasonably well with correlation coefficients higher than 0.97. The analysis of model simulation illustrates how the current output depends mainly on the substrate concentration as well as other main variables. The relationship between the current output and over-voltage is revealed by the modelling study. For acetate-based wastewaters with initial chemical oxygen demand (COD) concentrations of 350, 700, 1050, and 1400 mg/L, maximum observed power densities were 290, 405, 448, and 525 mW/m² associated with maximum COD removals of 84%, 88%, 83%, and 82%, respectively.     

Wettability Enhancement of SiCp in Cast A356/SiCp Composite Using Semisolid Process

The effects of SiCp treatment and magnesium addition on microstructural and mechanical properties of Al356/20 wt% SiCp semisolid composites were investigated. The results showed that cleaning and oxidizing of SiCp and addition of 1 wt% Mg resulted in improving wettability, incorporation, and uniform distribution of SiCp in A356 matrix. Consequently, the ultimate tensile strength (UTS) value increased by 19% and 32% when the SiC was treated and also when Mg was added, respectively, compared to as-received SiCp. In addition, hardness value increased from 69.7 HV in as-received SiCp to 94.8 HV after SiCp treatment and addition of Mg.