Decorating surface charge of graphite nanoplate using an electrostatic coupling agent for 3-dimensional polymer nanocomposite

Here, we report a facile approach to electrostatically couple the surface charges of graphite nanoplate (GNP) fillers and poly(methyl methacrylate) (PMMA) polymer particles using ethylene maleic anhydride (EMA) copolymer as an electrostatic coupling agent. Our strategy involved switching the intrinsic repulsive electrostatic interactions between the directly exfoliated GNPs fillers and the PMMA particles to attractive electrostatic surface interactions for preparing core(PMMA)-shell (GNP) precursor in order to optimizing 3-dimensionally dispersed polymer nanocomposite. As a result, the electrical conductivity of the composites dramatically increased by a factor of 16.7 in the EMA-coupled GNP/PMMA composites compared with that of the EMA-free GNP/PMMA composites. In addition, the percolation threshold was also notably reduced from 0.32 to 0.159 vol% after electrostatic coupling of the GNPs fillers and PMMA particles. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48390.     

Pressureless sintering and characterization of cordierite/ZrO2 composites

Cordierite/ZrO₂ composites with 5 to 25 wt% ZrO₂ were fabricated by conventional powder mixing and pressureless sintering method. Their densification behavior, microstructure, mechanical and thermal properties were studied. By dispersing 25 wt% (9.57 vol%) ZrO₂, densified cordierite/ZrO₂ composite with a relative density of 98.5% was obtained at an optimum sintering condition of 1440 °C and 2 h. ZrO₂ particles were homogenously dispersed within matrix grains and at the grain boundaries. The intragranular particles were finer than 100 nm and the intergranular particles were coarser. Both fracture strength and toughness could be enhanced more than two times higher, compare to those of monolithic cordierite, by dispersing 25 wt% ZrO₂ into the cordierite matrix. The toughening mechanism in the present composites was mainly attributed to martensitic transformation due to ZrO₂ dispersion. Electronic Publication     

Operation of a nonlinear optical loop mirror with orthogonally polarized waves in nonpolarization-preserving, single-mode fiber

We demonstrate stable operation of a NOLM using orthogonally polarized control and signal beams in nonpolarization-preserving, single-mode fiber. The NOLM can transcribe data from an optically incoherent input at one wavelength to a coherent output over a range of wavelengths. Operation of the NOLM without tuning for the input bit rate is possible over a range of bit rates from less than 1 Gb/s to more than 50 Gb/s.     

Nitrogen removal using recycled polystyrene bottles as biofilm media

The performance of an attached growth wastewater treatment process was investigated in an effort to improve nitrogen removal efficiency. Recycled Yakult (lactic acid fermentation drink) bottles made of polystyrene were used as a biofilm media. The use of Yakult bottles as a biofilm media has been attempted by numerous researchers in Japan for the removal of solids and organics. However, these studies focused only on the removal of solids and organics. This study extended their application to the removal of nitrogen for domestic sewage treatment. Yakult media was placed in a reactor with 70% apparent reactor volume in a conventional A/O process. The bottom of the Yakult media was removed, and randomly filled Yakult media were effectively able to reduce the flow in tanks, resulting in an increase in the contact time between pollutants and microorganisms. With higher HRT, the nitrogen removal efficiency was increased by up to 83% with 12 hr of HRT. Nitrification appeared to be the limiting factor of nitrogen removal at an HRT that is less than 12 hr, indicating that the Yakult process requires more retention time to achieve nitrification compared to other biofilm processes. The removal efficiencies of organics and solids were high regardless of the change of operational parameters. This article is based on a presentation in “The 7th Korea-China Workshop On Advanced Materials” organized by the Korea-China Advanced Materials Cooperation Center and the China-Korea Advanced Materials Cooperation Center, held at Ramada Plaza Jeju Hotel, Jeju Island, Korea on August 24–27, 2003.     

mVoIP for P2P service based authentication system using AA authentication server

VoIP (Voice over Internet Protocol), which provides voice calls as well as additional services at cheaper prices than PSTN (Public Switched Telephone Network), is gaining ground over the latter, which had been the dominant telephone network in the past. This kind of a VoIP service is evolving into a dedicated mVoIP service for the smartphone which allows calls to be made at cheap prices using a WiFi network, as the number of smartphone users is skyrocketing as of late. While an increase in the user base is expected for mVoIP, a packet network is an open network which means anyone can easily gain access and so there can be various problems. To mitigate this, in this paper an authentication system is designed which has an AA (Attribute Authority) server added to VoIP in order to increase security and discriminate user access. In this paper a system for addressing security vulnerabilities from the increase in the use of VoIP services and providing differentiated services according to user access privileges is designed. This paper is organized as follows: Chapter 1 gives the introduction; Chapter 2 is on related research; Chapter 3 describes the proposed technique and system; Chapter 4 implements the system and analyzes its the performance; and Chapter 5 gives the conclusions.     

Strain improvement of Aspergillus sojae for increased l-leucine aminopeptidase and protease production

Food Science and Biotechnology - Conventional random mutagenesis was implemented to improve l-leucine aminopeptidase (LAP) and protease production in Aspergillus sojae. Through successive...     

Enhancement of electroconductivity of polyaniline/graphene oxide nanocomposites through in situ emulsion polymerization

The present study introduces a systematic approach to disperse graphene oxide (GO) during emulsion polymerization (EP) of Polyaniline (PANI) to form nanocomposites with improved electrical conductivities. PANI/GO samples were fabricated by loading different weight percents (wt%) of GO through modified in situ EP of the aniline monomer. The polymerization process was carried out in the presence of a functionalized protonic acid such as dodecyl benzene sulfonic acid, which acts both as an emulsifier and protonating agent. The microstructure of the PANI/GO nanocomposites was studied by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, UV–Vis spectrometry, Fourier transform infrared, differential thermal, and thermogravimetric analyses. The formed nanocomposites exhibited superior morphology and thermal stability. Meanwhile, the electrical conductivities of the nanocomposite pellets pressed at different applied pressures were determined using the four-probe analyzer. It was observed that the addition of GO was an essential component to improving the thermal stability and electrical conductivities of the PANI/GO nanocomposites. The electrical conductivities of the nanocomposites were considerably enhanced as compared to those of the individual PANI samples pressed at the same pressures. An enhanced conductivity of 474 S/m was observed at 5 wt% GO loading and an applied pressure of 6 t. Therefore, PANI/GO composites with desirable properties for various semiconductor applications can be obtained by in situ addition of GO during the polymerization process.     

Balanced operation of a GaInAs/GaInAsP multiple-quantum-wellintegrated heterodyne receiver

The balanced operation of a multiple-quantum-well balanced heterodyne receiver photonic integrated circuit (PIC) is described. Using only SMA-connected 50 Ω commercial electronics, a free-space beam sensitivity of -42.3 dBm at 108 Mb/s and -39.7 dBm at 200 Mb/s for NRZ FSK (frequency-shift keying) reception has been achieved. This represents a 14 dB improvement over any previous heterodyne receiver PIC sensitivity. In addition to providing the multichannel benefits of heterodyne reception, this is also the highest sensitivity yet reported for any OEIC (optoelectronic integrated circuit) receiver     

Bi and Te thin films synthesized by galvanic displacement from acidic nitric baths

Bismuth (Bi) and tellurium (Te) thin films were formed by galvanic displacement of different sacrificial iron group thin films [i.e. nickel (Ni), cobalt (Co) and iron (Fe)] where the formation was systematically investigated by monitoring the change of open circuit potential (OCP), surface morphology and microstructure. The surface morphologies and crystal structures of galvanically displaced Bi or Te thin films strongly depended on the type and thickness of the sacrificial materials. Continuous Bi thin films were successfully deposited with the sacrificial Co. However, dendrites and nanoplatelets were formed from the Ni and Fe thin films. Te thin films were synthesized with all the three sacrificial thin films. Chemical dissolution rate of the sacrificial thin films and mixed potential strongly influenced formation of Bi or Te thin films.