Environmental Control of Triplet Emission in Donor–Bridge–Acceptor Organometallics

Carbene‐metal‐amides (CMAs) are a promising family of donor–bridge–acceptor molecular charge‐transfer (CT) emitters for organic light‐emitting diodes. A universal approach is demonstrated to tune the energy of their CT emission. A blueshift of up to 210 meV is achievable in solid state via dilution in a polar host matrix. The origin of this shift has two components: constraint of thermally‐activated triplet diffusion, and electrostatic interactions between guest and polar host. This allows the emission of mid‐green CMA archetypes to be tuned to sky blue without chemical modifications. Monte‐Carlo simulations based on a Marcus‐type transfer integral successfully reproduce the concentration‐ and temperature‐dependent triplet diffusion process, revealing a substantial shift in the ensemble density of states in polar hosts. In gold‐bridged CMAs, this shift does not lead to a significant change in luminescence lifetime, thermal activation energy, reorganization energy, or intersystem crossing rate. These discoveries offer new insight into coupling between the singlet and triplet manifolds in CMA materials, revealing a dominant interaction between states of CT character. The same approach is employed using materials which have been chemically modified to alter the energy of their CT state directly, shifting the emission of sky‐blue chromophores into the practical blue range.     

Effect of biological wastewater treatment on the molecular weight distribution of soluble organic compounds and on the reduction of BOD, COD and P in pulp and paper mill effluent

Pulp and paper mill wastewater was characterizated, before (influent) and after (effluent) biological wastewater treatment based on an activated sludge process, by microfiltration (8, 3, 0.45 and 0.22mum) and ultrafiltration (100, 50, 30 and 3kDa) of the wastewater samples into different size fractions. Various parameters were measured on each fraction: molecular weight distribution (MWD) using high performance size exclusion chromatography (HPSEC), total organic carbon (TOC), biochemical oxygen demand (BOD), chemical oxygen demand (COD), total phosphorus (Tot-P), phosphate phosphorus (PO(4)-P), electrical conductivity, pH, turbidity, charge quantity and zeta potential. The MWD, TOC and COD(Cr) results indicated that the majority of the material present in both the influent and effluent was in the medium molecular weight (MW) range (i.e. MW<10kDa) with three main MW sub-fractions. There were no significant differences in the range of the MWD between the influent and effluent samples. The magnitude of the MWD in the effluent was about one half that in the influent, the greatest reduction being in the 6kDa fraction. The 3kDa fractions of both the influent and effluent showed a considerable increase in BOD(7), probably due to the removal of compounds harmful to bacteria in 3kDa ultrafiltration. Influent turbidity decreased considerably in microfiltration (8-0.22mum). As the turbidity was removed by 0.22mum filtration, the anionic charge quantity started to decrease. Particles in the influent and effluent contained 19-29% and 14-20% of the total phosphorus, respectively. The major phosphorus fraction was in the form of soluble phosphate.     

Quantitative risk assessment on the dietary exposure of Finnish children and adults to nitrite

Nitrite intake from the consumption of cured meat and tap water was estimated for Finnish children of 1, 3 and 6 years as well as Finnish adults of 25–74 years. Nitrite content in the foods was measured by capillary electrophoresis, and was then used together with individual food consumption data from the FINDIET 2007 and DIPP studies in a stochastic exposure assessment by a Monte Carlo Risk Assessment (MCRA) program. Nitrite intake from additive sources and tap water was assessed, and more than every 10th child between the ages 3 and 6 years was estimated to have a nitrite intake exceeding the acceptable daily intake (ADI) of nitrite. The high exposure levels were caused by frequent consumption of large portions of sausages, up to 350 g day^–1 or 750 g in 3 days, among the children. Median nitrite intake from cured meat was 0.016, 0.040, 0.033 and 0.005 mg kg^–1 body weight day^–1 for children of 1, 3 and 6 years and adults, respectively. Bayesian estimation was employed to determine safe consumption levels of sausages and cold cuts for children, and these results gave rise to new national food consumption advice.     

BET Inhibition Upregulates SIRT1 and Alleviates Inflammatory Responses

Control of histone acetylation is a part of the epigenetic mechanism that regulates gene expression and chromatin architecture. The members of the bromodomain and extra terminal domain (BET) protein family are a group of epigenetic readers that recognize histone acetylation, whereas histone deacetyl‐ ases such as sirtuin 1 (SIRT1) function as epigenetic erasers. We observed that BET inhibition by the specific inhibitor JQ1 upregulated SIRT1 expression and activated SIRT1. Moreover, we observed that BET inhibition functionally reversed the pro‐inflammatory effect of SIRT1 inhibition in a cellular lung disease model. SIRT1 activation is desirable in many age‐related, metabolic and inflammatory diseases; our results suggest that BET protein inhibition would be beneficial in treatment of those conditions. Most importantly, our findings demonstrate a novel mechanism of SIRT1 activation by inhibition of the BET proteins.     

Techniques for Dispersion of Microorganisms into Air

ABSTRACT

Many commercially available devices initially developed for dispersion of biologically inert particles have been adopted for aerosolization of microoganisms in laboratory settings. However, these dispersion devices are not always adequate for microbial particles, as they do not simulate natural release into air. Wet dispersion methods are appropriate for viruses and most bacteria, whereas dry methods are more suitable for most fungal and actinomycete spores. Characteristics of the resulting aerosol are dependent on the dispersing shear forces and the sensitivity and agglomeration of the tested microorganisms. Consequently, each microbial group may need a specific dispersion technique. The following devices have been developed and tested in this study: the bubbling aerosol disperser, the agar-tube disperser, and the swirling-flow disperser. Testing included the evaluation of both physical and microbiological characteristics of aerosolized microorganisms. Each of the dispersers has shown several advantages over commercially available ones. When used for the dispersion of bacteria from the liquid suspension, the bubbling aerosol disperser was found to produce considerably fewer amounts of microbial fragments and much lower levels of microbial metabolic injury than the commercially available Collison nebulizer. Fungal spores dispersed from their colonies by the agar-tube disperser were found to have a more stable aerosol concentration and a lower fraction of agglomerates than achievable by conventional powder dispersion. The swirling-flow dispersion technique was used for aerosolization of actinomycetes because the agar-tube disperser could not provide a stable concentration of these spores due to their smaller size. The tests have shown that new methods minimize the changes of properties of the microorganisms during their aerosolization in the laboratory.     

Design and Collection Efficiency of a New Electrostatic Precipitator for Bioaerosol Collection

We have developed and tested a new bioaerosol sampler in which airborne microorganisms are collected by electrostatic means. In this sampler, 2 ionizers charge the incoming particles if they carry insufficient electric charge for efficient collection. The organisms are then subjected to a precipitating electric field and are collected onto 2 square agar plates positioned along the flow axis. Tests with nonbiological NaCl particles versus B. subtilis var. niger (BG) spores and vegetative cells have shown that airborne microorganisms are collected more efficiently than nonbiological particles, even when the microorganisms have first passed through an electric charge neutralizer with no additional charging applied. The difference was attributed to the natural charges contained in cell membranes or spore coats of the microorganisms. Charge-neutralized BG spores and vegetative cells were collected at 4 L/min with efficiencies close to 80%, depending on the precipitation voltage, versus 50-60% for NaCl test particles. When incoming BG spores were charged with positive ions and then collected by a precipitating voltage of + 1,300 V, about 80% of the incoming spores were collected and more than 70% of incoming spores formed colonies. These experiments with BG spores have also indicated that there were no significant particle losses inside the sampler. The collection efficiency of biological and nonbiological particles increased to 90-100% when the particles were externally charged and the precipitating voltage was increased to more than - 4,000 V. It has also been shown that the aerosolized BG spores (used as anthrax simulants for bioaerosol sensors) carry a net negative electric charge. Thus the collection efficiency depends on the polarity of the electric field applied across the agar plates. These findings indicate that the collection of airborne microorganisms is possible by electrostatic precipitation without prior electric charging if the microorganisms already carry electric charges. These are usually high immediately after their release into the air.     

Stenotrophomonas,Mycobacterium, and Streptomyces in home dust and air: associations with moldiness and other home/family characteristics

Respiratory illnesses have been linked to children's exposures to water‐damaged homes. Therefore, understanding the microbiome in water‐damaged homes is critical to preventing these illnesses. Few studies have quantified bacterial contamination, especially specific species, in water‐damaged homes. We collected air and dust samples in twenty‐one low‐mold homes and twenty‐one high‐mold homes. The concentrations of three bacteria/genera, Stenotrophomonas maltophilia, Streptomyces sp., and Mycobacterium sp., were measured in air and dust samples using quantitative PCR (QPCR). The concentrations of the bacteria measured in the air samples were not associated with any specific home characteristic based on multiple regression models. However, higher concentrations of S. maltophilia in the dust samples were associated with water damage, that is, with higher floor surface moisture and higher concentrations of moisture‐related mold species. The concentrations of Streptomyces and Mycobacterium sp. had similar patterns and may be partially determined by human and animal occupants and outdoor sources of these bacteria.