A Fluorometric Enzymatic Assay for Quantification of Steryl Glucosides in Biodiesel

Steryl glucosides (SG) are common contaminants in biodiesel that form precipitates, which form and cause problems due to fouling during transport and storage. Therefore, their quantification is necessary to assess the quality of this fuel. The methods currently available for SG analysis require expensive instrumentation, need a previous concentration step by solid‐phase extraction (SPE) or are of limited use for the quantitative assessment. We developed an enzymatic method for SG quantification in biodiesel samples based on the hydrolysis of the glucoside catalyzed by a broadly specific beta glucosidase and the subsequent determination of the glucose released by the reaction. The method is non‐expensive, sensitive and was adapted to 96‐well format fluorescence plate reader, making it useful for the parallel assay of multiple samples. The enzymatic assay presented here represent a valuable tool for both quality control and the development of improved biodiesel production and purification procedures.     

Optimal management of logistic activities in multi-site environments

The new emerging area of Enterprise Wide Optimization (EWO) has focused the attention in effectively solving the combined production/distribution scheduling problem. The importance of logistic activities performed in multi-site environments comes from the relative magnitude of the associated transportation costs and the good chance of getting large savings on such expenses. This paper first develops an exact MILP mathematical formulation for the multiple vehicle time-window-constrained pickup and delivery (MVPDPTW) problem. The approach is able to account for many-to-many transportation requests, pure pickup and delivery tasks, heterogeneous vehicles and multiple depots. Optimal solutions for a variety of benchmark problems with cluster/random distributions of pickup and delivery locations and limited sizes in terms of customer requests and vehicles have been discovered. However, the computational cost exponentially grows with the number of requests. For large-scale m-PDPTW problems, a local search improvement algorithm steadily providing a better solution through two evolutionary steps is also presented. A neighborhood structure around the starting solution is generated by first allowing multiple request exchanges among nearby trips and then permitting the reordering of nodes on every individual route. If a better set of routes is found, both steps are repeated until no improved solution is discovered. Compact MILP mathematical formulations for both sub-problems have been developed and solved through an efficient branch-and-bound algorithm. A significant number of large-scale m-PDPTW benchmark problems, some of them including up to 100 transportation requests, were successfully solved in reasonable CPU times.     

Nanocrystalline TiO2 photosensitized with natural polymers with enhanced efficiency from 400 to 600 nm

TiO₂ sensitization for solar applications requires not only efficient but also stable and inexpensive sensitizers. Different condensed tannins extracted from bark wastes of tropical wood trees were studied as possible sensitizers of TiO₂. These natural polymers adhere strongly to the TiO₂ even from aqueous solutions. Absorption spectra are presented for 1 mM aqueous sensitizing solutions prepared with lyophilized condensed tannins which absorb light in the visible range. Spectral photocurrent measurements and I–V characterization show that no bias is required for electron injection to the TiO₂ from all studied condensed tannins. Incident photon to current efficiency (IPCE) analysis indicates that surface complexation originates absorption bands with different electron injection efficiencies. These play a dominant role in determining IPCE spectral shape. We propose that surface modification by the sensitizer changes the surface trap density, thereby decreasing recombination losses.     

The problem of the selection of an a posteriori error indicator based on smoothening techniques

This paper addresses the problem of assessing the quality of an a posteriori error estimate of a finite element solution. An error estimate based on local L2-projections is analysed in the case of translation-invariant meshes. It is shown that for general meshes this technique does not lead to an asymptotically exact estimator. The problem is analysed in detail in the one-dimensional setting. It is shown that an asymptotically exact estimator is not the optimal one when the solution is not sufficiently smooth. An optimal estimator for adaptively constructed meshes is given. Finally, a general mathematical framework for the quality assessment of estimators is introduced.     

Equilibrium Moisture Characteristics of High Oleic Sunflower Seeds and Kernels

The equilibrium moisture content (EMC) characteristics of high oleic sunflower seeds and kernels between 10 and 55°C were determined by equilibrating the samples to known relative humidities (RH) above saturated salt solutions. EMC of the kernels was lower than that of seeds in the range of 11 to 96% ERH and at 25 and 40°C. Hysteresis effect was found for the EMC properties of seeds and kernels at 25°C. Four EMC-ERH models (modified Henderson, Chung-Pfost, Halsey, and Guggenheim-Anderson-de Boer) and their estimated parameters were evaluated for goodness of fit. GAB and Halsey equations showed the best fitting of experimental data although GAB equation adjusted for temperature described the EMC data the best. Components of the seed as oil content or hull/kernel ratio did not explain the slight differences in EMC found between the varieties.     

Subsurface Characterization at Ground Failure Sites in Adapazari, Turkey

Ground failure in Adapazari, Turkey during the 1999 Kocaeli earthquake was severe. Hundreds of structures settled, slid, tilted, and collapsed due in part to liquefaction and ground softening. Ground failure was more severe adjacent to and under buildings. The soils that led to severe building damage were generally low plasticity silts. In this paper, the results of a comprehensive investigation of the soils of Adapazari, which included cone penetration test (CPT) profiles followed by borings with standard penetration tests (SPTs) and soil index tests, are presented. The effects of subsurface conditions on the occurrence of ground failure and its resulting effect on building performance are explored through representative case histories. CPT- and SPT-based liquefaction triggering procedures adequately identified soils that liquefied if the clay-size criterion of the Chinese criteria was disregarded. The CPT was able to identify thin seams of loose liquefiable silt, and the SPT (with retrieved samples) allowed for reliable evaluation of the liquefaction susceptibility of fine-grained soils. A well-documented database of in situ and index testing is now available for incorporating in future CPT- and SPT-based liquefaction triggering correlations.     

Human DNA topoisomerase I-mediated cleavages stimulated by ultraviolet light-induced DNA damage

DNA topoisomerases have been proposed as the proteins involved in the formation of the DNA-protein cross-links detected after ultraviolet light (UV) irradiation of cellular DNA. This possibility has been investigated by studying the effects of UV-induced DNA damage on human DNA topoisomerase I action. UV lesions impaired the enzyme's ability to relax negatively supercoiled DNA. Decreased relaxation activity correlated with the stimulation of cleavable complexes. Accumulation of cleavable complexes resulted from blockage of the rejoining step of the cleavage-religation reaction. Mapping of cleavage sites on the pAT153 genome indicated UV-induced cleavage at discrete positions corresponding to sites stimulated also by the topoisomerase I inhibitor camptothecin, except for one. Subsequent analysis at nucleotide level within the sequence encompassing the UV-specific cleavage site revealed the precise positions of sites stimulated by camptothecin with respect to those specific for UV irradiation. Interestingly, one of the UV-stimulated cleavage sites was formed within a sequence that did not contain dimerized pyrimidines, suggesting transmission of the distortion, caused by photodamage to DNA, into the neighboring sequences. These results support the proposal that DNA structural alterations induced by UV lesions can be sufficient stimulus to induce cross-linking of topoisomerase I to cellular DNA.     

Incorporating If...Then...Personality Signatures in Person Perception: Beyond the Person-Situation Dichotomy.

Three studies investigated conditions in which perceivers view dispositions and situations as interactive, rather than independent, causal forces when making judgments about another's personality. Study 1 showed that perceivers associated 5 common trait terms (e.g., friendly and shy) with characteristic if...then... (if situation a, then the person does x, but if situation b, then the person does y) personality signatures. Study 2 demonstrated that perceivers used information about a target's stable if...then... signature to infer the target's motives and traits; dispositional judgments were mediated by inferences about the target's motivations. Study 3 tested whether perceivers draw on if...then... signatures when making judgments about Big Five trait dimensions. Together, the findings indicate that perceivers take account of person-situation interactions (reflected in if...then... signatures) in everyday explanations of social behavior and personality dispositions. Boundary conditions are also discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)