CuI Immobilized on Tricationic Ionic Liquid Anchored on Functionalized Magnetic Hydrotalcite (Fe3O4/HT-TIL-CuI) as a Novel,Magnetic and Efficient Nanocatalyst for Ullmann-Type C–N Coupling Reaction

One of the most important reactions in organic synthesis is Ullmann-type C–N coupling reaction which has been used for preparation of numerous biologically active compounds. In this work, CuI immobilized on tricationic ionic liquid anchored on functionalized magnetic hydrotalcite (Fe₃O₄/HT-TIL-CuI) has been successfully prepared and fully characterized by different techniques, including fourier-transform infrared spectroscopy, vibrating sample magnetometer, thermo gravimetric analysis, transmission electron microscopy, field-emission scanning electron microscopy, energy dispersive X-ray spectroscopy, elemental mapping, zeta potential, X-ray diffraction, temperature programmed desorption of ammonia (NH₃-TPD), temperature-programmed reduction and inductively coupled plasma. The results showed that the as-prepared nanocatalyst possesses plate-like morphology with approximate size of 50 nm and superparamagnetic behavior. Also, total acidity and total hydrogen consumption of the nanocatalyst were measured to be 8.5 and 1.41 mmol g^?1, respectively. This nanocatalyst exhibited favorable performance for C–N coupling reaction among a variety of aryl halides and N(H)-heterocycles (benzimidazoles, pyrazoles and triazoles) in the presence of 2.5 mol% of nanocatalyst without any additives under air atmosphere revealing high yields in all cases. Besides, it is noted that in the present system the desired product can be easily and quickly isolated and nanocatalyst also recovered magnetically from the reaction mixture employing a permanent magnet for at least six consecutive trials without a discernible decrease in catalytic activity which makes the proposed methodology appropriate for industrial. The findings demonstrated the advantages of the present method as no need for neutral atmosphere, appropriate times, recyclability of the catalyst, broad substrate scope, minimization of chemical waste, simple purification of products, easy workup process, and high yields.

     

An Experimental Investigation of Permeability Impairment Under Dynamic Flow Conditions Due to Natural Depletion in an Iranian Oilfield

Asphaltene deposition is an issue that has received much attention since it has been shown to be the cause of major production problems. It leads to permeability reduction under the processes of natural depletion as well as hydrocarbon gas/CO₂ injection. Though a great deal of researches have focused on studying permeability impairment in reservoir rocks, little is known about the asphaltene deposition mechanisms that control the permeability reduction for Iranian reservoirs. In this work, an experimental effort is made to investigate the permeability impairment of core samples of Iranian oil reservoirs. The experiments are performed on both sandstone and carbonate rock types at reservoir temperature and pressure. The mass balance was used for evaluating of porosity reduction during the experiments. The results indicate that the dominant deposition mechanism changes as production proceeds. In addition, it has been found that the primary mechanism in permeability impairment is surface deposition. On the other hand, entrainment of asphaltene particles is manifested when outlet pressure drops from 4,200 to 3,800 Psig for both sandstone and carbonate samples. It can be drawn that asphaltene entrainment dependence to pressure is much more than that to the injected pore volume. This research illuminates the deposition mechanisms and determines dynamic parameters of asphaltene deposition, which are necessary to devise reliable prevention strategies.     

Nuclear Data Sheets for A = 71

The evaluated spectroscopic data are presented for experimentally known nuclides of mass 71 (Mn,Fe,Co,Ni,Cu,Zn,Ga,Ge,As,Se,Br,Kr). Excited-state data are nonexistent for ⁷¹Mn, ⁷¹Fe, ⁷¹Co and ⁷¹Kr. Significant new data have been added since the last evaluation of A=71 nuclides by M. Bhat (1993Bh02). Excited states are now known in ⁷¹Ni and ⁷¹Cu, and enhanced information about high-spin excitations is available for ⁷¹Ga, ⁷¹As and ⁷¹Br. The decay schemes of radioactive isotopes ⁷¹Mn and ⁷¹Fe are not known at all, and those for ⁷¹Co, ^71mNi and ⁷¹Kr are not known well. For the decay of ⁷¹Cu, ^71gNi, and ⁷¹Br, extensive data are available, but in the opinion of the evaluators the decay schemes still seem incomplete.This work supersedes earlier full evaluations of A=71 published by 1988Bh01, 1979Ke06 and 1973Al33, and the last one published in ‘update’ mode by 1993Bh02.     

Efficient PFD-Based Networking and Buffering Models for Improving Video Quality over Congested Links

Video traffic over the Internet becomes increasingly popular and is expected to comprise the largest proportion of the traffic carried by wired and wireless networks. On the other hand, videos are usually compressed by exploiting spatial and temporal redundancy for the reason of increasing the number of video streams that can be simultaneously carried over links. Unfortunately, receiving high-quality video streaming over the Internet remains a challenge due to the packet loss encountered in the congested wired and wireless links. In addition, the problem is more apparent in wireless links due to not only employing limited system capacity, but also some of the major drawbacks of wireless networks, out of which the bandwidth limitations and link asymmetry which refers to the situation where the forward and reverse paths of a transmission have different channel capacities. Therefore, the wireless hops may be congested which result in dropping many video frames. Additionally, as a result of compressing videos, dependencies among frames and within a frame arise. Consequently, the overall video quality tends to be degraded dramatically. The main challenge is to support the growth of video traffic while keeping the perceived quality of the delivered videos high. In this paper, we extend our previous work concerning improving video traffic over wireless networks through professionally studying the dependencies between video frames and their implications on the overall network performance. In other words, we propose very efficient network and buffer models proportionately to novel algorithms that aim to minimize the cost of aforementioned possible losses by selectively discarding frames based on their contribution to picture quality, namely, partial and selective partial frame discarding policies considering the dependencies between video frames. The performance metrics that are employed to evaluate the performance of the proposed algorithms include the rate of non-decodable frames, peak signal-to-noise ratio, frameput, average buffer occupancy, average packet delay, as well as jitter. Our results are so promising and show significant improvements in the perceived video quality over what is relevant in the current literature. We do not end up to this extent, but rather the effect of producing different bit-stream rates by the FFMPEG codecs on aforementioned performance metrics has been extensively studied.     

New video discarding policies for improving UDP performance over wired/wireless networks

Multimedia communication over wired and wireless networks becomes a compulsory need for many recent applications. To effectively react to the tremendous demand of video streaming over the Internet, videos are usually compressed by utilizing spatial and temporal redundancy. It is noteworthy to mention that compressing videos may degrade their quality if it is not investigated properly. In other words, as a consequence of exploiting redundancies, frame dependencies emanate, which make discarding frames, because of occupying the whole capacity of network elements, have severe implications on the video quality. Furthermore, transmitting videos over capacity‐limited links owing to error‐prone channels, power constraints and bandwidth variations will severely affect the video quality. Additionally, as the current coding schemes are characterized by being able to afford high compression efficiency, sensitivity to packet losses becomes untolerated. Therefore, insuring the perceived quality of the delivered videos to be always high in spite of aforementioned challenges is the primary focus of current researchers. In this paper, we propose efficient and novel video discarding policies that mainly aim to reduce the number of frames being lost through substitution of those frames that are very difficult or even impossible to decode at the receiver side. This is accomplished by controlling and maintaining the buffer occupancy of network elements. Our proposed policies are evaluated in terms of frameput, rate of non‐decodable frames, peak signal‐to‐noise ratio, structural similarity index and average buffer occupancy. Our proposed policies behave very well and achieve a remarkable enhancement over what is closely connected in the literature. Copyright © 2015 John Wiley & Sons, Ltd.     

Styrene butadiene rubber/epoxidized natural rubber/carbon filler nanocomposites: microstructural development and cure characterization

Microstructural development of elastomeric nanocomposites based on (50/50 wt%) styrene butadiene rubber (SBR) and epoxidized natural rubber (50 mol% epoxidation, ENR50) as the rubber matrix including two types of carbon fillers, carbon black (CB) and functionalized multiwall carbon nanotube (NH₂-MWCNT), which were prepared through melt mixing, was studied. The results from FTIR analysis show that there is interaction between functional groups on MWCNT surface and the rubber chains. The AFM analysis also indicates good dispersion of filler particles in the rubber phases. FESEM images from cryo-fractured surface of samples have revealed that nanotubes were rarely pulled out of matrix and their diameter increased, resulting from good interaction between MWCNTs and rubber chains. The DMA results confirm good interfacial interaction between them. Furthermore, the reduced difference between the two T_gs of phases (ΔT_g) shows that the incorporation of 3 phr MWCNT into the blend leads to increment in rubber phase compatibility but at higher MWCNT content (5 phr) due to lower Mooney viscosity of SBR phase, MWCNTs tend to remain in this phase. The bound rubber was adopted to characterize the polymer–filler interaction, showing that bound rubber content has an increasing trend with increasing in fillers content. The cure rheometric studies reveal that MWCNTs accelerate the cure process due to the presence of amine groups on the nanotube surface. In addition, the mechanical properties of samples show an increasing trend by increasing nano-filler content.

     

Dissimilar Joining of AISI 304L/St37 Steels by TIG Welding Process

In present work the weldings of an austenitic stainless steel （AISI 304L） and a ferritic carbon steel （St37） were conducted by tungsten inert gas （TIG） welding process using four different austenitic filler metals, namely ER308L, ER309L, ER316L and ER310. Microstructure characteristics and mechanical properties of the weldments were studied using optical and scanning electron microscopy, ferrit-ometry, hardness, tensile and impact tests. The ferrite number （_N-~） of the weldments made by different electrodes varies between 0.5 and 9.5. It was found that the increase in amount of delta ferrite in the microstructure of the weld metals, causes the decrease of the impact toughness of the weldments. It seems that using ER309L and ER316L electrodes can provide a good combination between the mechanical and metallurgical properties of the joint in AISI 304L/St37 dissimilar welding.     

Effect of Fiber Acid Treatment on the Dynamic Mechanical Properties of Unsaturated Polyester/Carbon Fiber Unidirectional Composites

In this study, the surface modification of carbon fiber by sulfuric acid is investigated. Atomic Force Microscopy was employed to capture the corresponding changes in the surface roughness of the carbon fiber. Moreover, using treated and untreated fibers, unsaturated polyester unidirectional composite rods were prepared and their flexural properties were determined by three-point bending and dynamic mechanical thermal analysis.

The results indicated that the carbon fiber surface roughness increases in all samples. It is also found that treating the fiber decreases the magnitude of loss modulus. Besides, the flexural strength of composites made of the treated carbon fiber significantly increased.     

Network-status aware quality adaptation algorithm for improving real-time video streaming over the internet

Multimedia Tools and Applications - Video streaming over Internet has been gaining momentum and several quality adaptation schemes have been reported to improve quality of the streamed videos. Most...