NLRP3 Inflammasome Activation Is Involved in LPA1-Mediated Brain Injury after Transient Focal Cerebral Ischemia

Lysophosphatidic acid receptor 1 (LPA₁) contributes to brain injury following transient focal cerebral ischemia. However, the mechanism remains unclear. Here, we investigated whether nucleotide-binding oligomerization domain-like receptor family pyrin domain containing 3 (NLRP3) inflammasome activation might be an underlying mechanism involved in the pathogenesis of brain injury associated with LPA₁ following ischemic challenge with transient middle cerebral artery occlusion (tMCAO). Suppressing LPA₁ activity by its antagonist attenuated NLRP3 upregulation in the penumbra and ischemic core regions, particularly in ionized calcium-binding adapter molecule 1 (Iba1)-expressing cells like macrophages of mouse after tMCAO challenge. It also suppressed NLRP3 inflammasome activation, such as caspase-1 activation, interleukin 1β (IL-1β) maturation, and apoptosis-associated speck-like protein containing a caspase recruitment domain (ASC) speck formation, in a post-ischemic brain. The role of LPA₁ in NLRP3 inflammasome activation was confirmed in vitro using lipopolysaccharide-primed bone marrow-derived macrophages, followed by LPA exposure. Suppressing LPA₁ activity by either pharmacological antagonism or genetic knockdown attenuated NLRP3 upregulation, caspase-1 activation, IL-1β maturation, and IL-1β secretion in these cells. Furthermore, nuclear factor-κB (NF-κB), extracellular signal-regulated kinase 1/2 (ERK1/2), and p38 were found to be LPA₁-dependent effector pathways in these cells. Collectively, results of the current study first demonstrate that LPA₁ could contribute to ischemic brain injury by activating NLRP3 inflammasome with underlying effector mechanisms.     

Efficient Jarratt-like methods for solving systems of nonlinear equations

We present the iterative methods of fourth and sixth order convergence for solving systems of nonlinear equations. Fourth order method is composed of two Jarratt-like steps and requires the evaluations of one function, two first derivatives and one matrix inversion in each iteration. Sixth order method is the composition of three Jarratt-like steps of which the first two steps are that of the proposed fourth order scheme and requires one extra function evaluation in addition to the evaluations of fourth order method. Computational efficiency in its general form is discussed. A comparison between the efficiencies of proposed techniques with existing methods of similar nature is made. The performance is tested through numerical examples. Moreover, theoretical results concerning order of convergence and computational efficiency are confirmed in the examples. It is shown that the present methods are more efficient than their existing counterparts, particularly when applied to the large systems of equations.     

Influence of the nanofiber dimensions on the properties of nanocellulose/poly(vinyl alcohol) aerogels

The investigation of aerogels made from cellulose nanofibers and poly(vinyl alcohol) (PVOH) as a polymeric binder is reported. Aerogels based on different nanocellulose types were studied to investigate the influence of the nanocellulose dimensions and their rigidity on the morphology and mechanical properties of the resulting aerogels. Thus, cellulose nanocrystals (CNCs) with low (10), medium (25), and high (80) aspect ratios, isolated from cotton, banana plants, and tunicates, respectively, microfibrillated cellulose (MFC) and microcrystalline cellulose (MCC) were dispersed in aqueous PVOH solutions and aerogels were prepared by freeze‐drying. In addition to the cellulose type, the PVOH‐ and the CNC‐concentration as well as the freeze‐drying conditions were varied, and the materials were optionally cross‐linked by an annealing step or the use of a chemical cross‐linker. The data reveal that at low PVOH content, rigid, high‐aspect ratio CNCs isolated from tunicates afford aerogels that show the least amount of shrinking upon freeze‐drying and display the best mechanical properties. However, with increasing concentration of PVOH or upon introduction of a chemical cross‐linker the differences between materials made from different nanocellulose types decrease. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41740.     

Melt processing of polyamide 12 and cellulose nanocrystals nanocomposites

The fabrication of nanocomposites of polyamide 12 (PA12) and cellulose nanocrystals (CNCs) isolated from cotton and tunicates is reported. Through a comparative study that involved solution‐cast (SC) and melt‐processed materials, it was shown that PA12/CNC nanocomposites can be prepared in a process that appears to be readily scalable to an industrial level. The results demonstrate that CNCs isolated from the biomass by phosphoric acid hydrolysis display both a sufficiently high thermal stability to permit melt processing with PA12, and a high compatibility with this polymer to allow the formation of nanocomposites in which the CNCs are well dispersed. Thus, PA12/CNC nanocomposites prepared by melt‐mixing the two components in a co‐rotating roller blade mixer and subsequent compression molding display mechanical properties that are comparable to those of SC reference materials. Young's modulus and maximum stress could be doubled in comparison to the neat PA12 by introduction of 10% (CNCs from tunicates) or 15% w/w (CNCs from cotton) CNCs. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42752.     

An experimental study on the performance of a zinc air fuel cell with inexpensive metal oxide catalysts and porous organic polymer separators

A zinc air fuel cell (ZAFC) of taper-end structure was designed and manufactured with a polyamide-base engineering plastic. An air cathode with multiple layers of blended inexpensive metal oxides, MnO₂ and CeO₂, showed a remarkably stable electricity-generating performance even at high current density. A cheap thin Nylon filter was found as a potential candidate for the separator in ZAFC because of its high stability and durability in the alkali electrolyte and proper pore size.     

Increased discharge capacity of a Li-air activated carbon cathode produced by preventing carbon surface passivation

A significant discharge capacity increase (larger than 3 times) for the gas-diffusion-electrode (GDE) used in Li-air cells was demonstrated through modification of the carbon surface with long-chain hydrophobic molecules. The capacity loss of the Li-air activated carbon cathode was found to be caused by the formation of undesired surface passivation. The mechanism of such passivation was identified as the formation of dense Li oxide films directly on the surface of the carbon during the oxygen reduction reaction. Such dense layers of Li oxide are here identified as the root cause of the undesired passivation, which blocks electrochemical reactions, increases the impedance and drops the discharge voltage rapidly. This investigation reveals that the capacity for the gas-diffusion-electrode can be substantially increased, if the activated carbon is modified by attaching long-chain hydrophobic molecules onto the surface. The carbon surface modification significantly delays the formation of the dense Li oxide layers. Therefore, the discharge capacity for the GDE is substantially increased.     

Neuronal spike activity in the nucleus accumbens of behaving rats during ethanol self-administration

Many lines of evidence support the importance of the nucleus accumbens (NAC) for ethanol-reinforced behavior. The nature of the neuronal activity that occurs in this region during ethanol self-administration is not known. We recorded from ensembles of single-units primarily located within the shell of the NAC during operant responding for oral ethanol solutions by well-trained rats. Of 90 units recorded from seven sessions from seven rats, 41 (46%) did not exhibit significant changes in relation to the experimental events. Of the 49 units (54%) that did exhibit significant phasic changes, alterations in firing rate occurred in relation to the following experimental events: operant response (63%), tone stimulus (20%), and ethanol delivery (63%). In addition, changes in spike activity during the intervals between the three experimental events were noted in 33% of the units. Most units (55% of responsive units) responded to multiple experimental events. Thus different but overlapping populations of neurons in the NAC represent each event that occurs along the temporal dimension of a single trial performed to obtain ethanol reward. The data suggest that the NAC plays a crucial role in linking together conditioned and unconditioned internal and external stimuli with motor plans to allow for ethanol-seeking behavior to occur.     

Type of starter culture influences on structural and sensorial properties of low protein fermented gels

Organoleptic properties of skimmed milk fermented gels are progressively demanding to produce optimal quality yogurts. Chr‐Hansen trademark registered cultures were used to produce low‐protein (3.4%) gels to assess the ability to redesign the sensorial and textural properties with the choice of starter culture. Resulting gels were assessed for sensorial, textural, rheological, and microstructural properties and compared with a commercial control (4.5% protein). Mouth thickness, syneresis, firmness, elasticity, and consistency values were lower for polysaccharides‐producing cultures. Such cultures contributed to the higher creaminess and tended to give higher ropiness. Observed differences among microstructures of the gel were minute. Microstructural and rheological data corresponded and reflected the instrumental and sensory interpretations. Strong correlations were observed between sensory and instrumental data. Nonprobiotics cultures resulted in promising overall gel properties compared with probiotic cultures according to the principal component analysis. Yet probiotic cultures resulted in lower syneresis than nonprobiotic cultures. Thus, the choice of bacterial culture modifies the sensorial and textural properties of fermented gel with strong correlations, as a result of altered gel network formation with the production of polysaccharides. Inferior textural and sensorial quality aspects, particularly at low protein levels, have negative impact on consumer demand of low protein yogurts. Thus, we attempted to gain required gel textural and sensorial properties with a choice of starter culture with a low protein level. Resulting gel properties at lowered protein content with different starter cultures are not fully known. The present study compares the effect of probiotic and nonprobiotic starter cultures on gel properties, as gel texture and sensory properties are of great interest and thus not willing to be compromised. In addition, we examined the overall texture profile of studied cultures and correlate with sensory properties. Therefore, reducing protein level in milk and achieving required gel properties with the choice of appropriate starter culture is of great commercial interest as a cost‐cutting strategy to produce low‐cost optimum quality yogurt.     

Alphorn: a remote procedure call environment for fault-tolerant,heterogeneous, distributed systems

Alphorn, a software environment for programming distributed computer systems, is described. Programs running on different computers, possibly of different types and running different operating systems, communicate in a client-server relationship by means of remote procedure calls. This efficient construct structures programs neatly. The paper covers distributed process control, Alphorn's object-based programming style, remote procedure calls, the service interface language, configuration, runtime and debugging, and fault tolerance support     

Model-driven approach to enterprise interoperability at the technical service level

Enterprise Interoperability is the ability of enterprises to interoperate in order to achieve their business goals. Although the purpose of enterprise interoperability is determined at the business level, the use of technical (IT) services to support business services implies that interoperability solutions at both the business and technical level should be aligned. This paper introduces and demonstrates the suitability of an approach based on model transformations to automate enterprise interoperability. We start by considering that a set of enterprises are willing to interoperate in the context of their individual goals. The interactions necessary for their cooperation are then properly captured in terms of a so-called choreography. Our approach allows a choreography to be mapped and transformed to an orchestration, which defines the operation of the actual technical services of the interoperating enterprises. The paper discusses the technical challenges of implementing the transformation, and illustrates our approach with two application scenarios.