Reduced‐scale test to assess the effect of fire barriers on the flaming combustion of cored composites: An upholstery‐material case study

Herein, we describe a reduced‐scale test (“Cube” test), measuring the fire performance of specimens including a fire barrier (FB) and a flammable core material, which acts as the main fuel load. The specimen is intended to reproduce a cross‐section of a composite product where heat/mass transfer occurs primarily in a direction perpendicular to the FB. The Cube test procedure and benefits are discussed in this work by adopting residential upholstery furniture as an exemplary study. One flexible polyurethane foam, one polypropylene cover fabric, and 10 commercially available FBs were selected. They were used to compare the fire performance of FBs, measured in terms of peak of heat release rate, in the ASTM E1474‐14 standard test and the newly developed Cube test. Edge effects severely affected the performance of FBs in the ASTM E1474‐14 standard test but not in the Cube test. Furthermore, appropriate test conditions were determined in the Cube test to measure the so‐called “wetting point,” that is, the time and value of heat release rate measured when flammable liquid products were first observed on the bottom of the specimen. The relevance of the “wetting point” in terms of full‐scale fire performance and failure mechanism of FBs is discussed.     

Enhanced electron harvesting in next generation solar cells by employing TiO2 nanoparticles prepared through hydrolysis catalytic process

Titanium dioxide (TiO₂) nanoparticles (NPs) were synthesized through solvothermal route by changing the rate of hydrolysis in the catalytic process. In order to change the hydrolysis rate, the concentration of acetic acid, as additive, was varied as 2 M, 3 M and 4 M. The synthesized NPs were examined by various physico-chemical characterization techniques. The powder X-ray diffraction (PXRD) analysis of the NPs reveals only the anatase phase of TiO_2. The spherical shaped morphology of the NPs was observed in the high-resolution transmission electron microscopy (HR-TEM) analysis. The optical behaviour such as absorption, bandgap, diffuse reflectance and photoluminescence (PL) emission of the NPs were studied. The material's nature and behaviors were scrutinized and they were employed as photoanode in dye sensitized solar cell (DSSC) and as electron transport layer (ETL) in carbon-based perovskite solar cell (C-PSC). The charge transfer at the interface of the devices was studied with electrochemical impedance spectroscopy (EIS). The fabricated DSSC and C-PSC show highest power conversion efficiency (PCE) of 6.1% and 10.6%, respectively. The highest current collection was detected in C-PSC and the results are discussed in detail.     

A methodology for predicting and comparing the full‐scale fire performance of similar materials based on small‐scale testing

Reconstructive fire testing is an important tool used by fire investigators to determine the cause, origin, and progression of a particular fire. Accurate reconstruction of the fire requires the laboratory structure to be outfitted with materials that, in terms of contribution to fire growth, perform similarly to the original materials found at the fire scene. Therefore, a procedure was developed to enable fire investigators to select these replacement materials on the basis of a quantitative assessment of their relative fire performance. This procedure consists of gram‐scale and/or milligram‐scale standard testing accompanied by inverse numerical modeling of these tests, which is used to obtain relevant material properties. A numerical model composed of a detailed pyrolysis submodel and empirical flame heat feedback submodels, which were developed in this study, is subsequently employed to simulate the early stages of the Room Corner Test, which was selected to represent full‐scale material performance. The results of these simulations demonstrate that this procedure can successfully differentiate between fire growth propensities of several commercially available medium density fiberboards.     

Study of the synergistic effect of boron nitride and carbon nanotubes in the improvement of thermal conductivity of epoxy composites

The enhancement of the thermal conductivity, keeping the electrical insulation, of epoxy thermosets through the addition of pristine and oxidized carbon nanotubes (CNTs) and microplatelets of boron nitride (BN) was studied. Two different epoxy resins were selected: a cycloaliphatic (ECC) epoxy resin and a glycidylic (DGEBA) epoxy resin. The characteristics of the composites prepared were evaluated and compared in terms of thermal, thermomechanical, rheological and electrical properties. Two different dispersion methods were used in the addition of pristine and oxidized CNTs depending on the type of epoxy resin used. Slight changes in the kinetics of the curing reaction were observed in the presence of the fillers. The addition of pristine CNTs led to a greater enhancement of the mechanical properties of the ECC composite whereas the oxidized CNTs presented a greater effect in the DGEBA matrix. The addition of CNTs alone led to a marked decrease of the electrical resistivity of the composites. Nevertheless, in the presence of BN, which is an electrically insulating material, it was possible to increase the proportion of pristine CNTs to 0.25 wt% in the formulation without deterioration of the electrical resistivity. A small but significant synergic effect was determined when both fillers were added together. Improvements of about 750% and 400% in thermal conductivity were obtained in comparison to the neat epoxy matrix for the ECC and DGEBA composites, respectively. © 2019 Society of Chemical Industry     

Temporary feeding shocks increase the productivity in a continuous biohydrogen-producing reactor

Continuous hydrogen production stability and robustness by dark fermentation were comprehensively studied at laboratory scale. Continuous bioreactors were operated at two different hydraulic retention times (HRT) of 6 and 10 h. The reactors were subjected to feeding shocks given by decreases in the HRT, and therefore the organic loading increases, during 6 and 24 h. Results indicated that the H₂ productivity was significantly improved by the temporary organic shock loads, increasing the hydrogen production rate up to 40%, compared to the rate obtained at the steady-state condition. Besides, it was observed that after the shock load, the stability of the reactor (measured as the hydrogen production rate) was recovered attaining the values observed before the feeding shocks. The bioreactor operated at shorter HRT (6 h) showed better H₂ productivity (17.3?±?1.1 L H₂/L-d) in comparison with the other one operated at 10-h HRT (12.4?±?1.6 L H₂/L-d).     

The relationship between self-reported tobacco exposure and cotinines in urine and blood for pregnant women

To explore the relationship of self-reported exposure to tobacco smoke and the cotinine levels in the urine and blood over the follow-up period for pregnant women. Three hundred ninety-eight pregnant women undergoing prenatal care were interviewed in different trimesters at three hospitals in central Taiwan using a structured questionnaire. Based on their self-reported smoking experience, the participants were classified into three groups (25 smokers, 191 passive smokers, and 182 non-smokers) and were tracked in this study up to the time of delivery. Cotinine levels were tested for the maternal blood and urine at the end of each trimester and for the umbilical cord-blood of the newborns. All specimens were measured using a sensitive high-performance liquid chromatographic (HPLC) technique. In general, urinary cotinine levels were higher in subjects who smoked (including current- and ex-smokers) than those who never smoked. The pattern of distribution of cotinine levels among smoking/ETS exposure group in the urine sample was similar to that in the blood sample. The umbilical cord-blood cotinine levels was found to be highest in the active smoking group, followed by the ETS group exposed to ETS both at home and in the workplace. Over the course of the pregnancies, there was an increase in cotinine levels in urine and maternal blood for each of 3 exposure groups. Exposure to smoking by self-reported information in pregnant women has been found to be directly related to the levels of cotinine in the umbilical cord-blood of the fetus. Cotinine is a sensitive measure of ETS exposure, but if biochemical analysis is not available or convenient for a pregnant woman, then self-reported exposure to ETS can provide a good estimate if the information is gathered by a well-trained interviewer in a structured way.     

Evaluation of the occurrence and biodegradation of parabens and halogenated by-products in wastewater by accurate-mass liquid chromatography-quadrupole-time-of-flight-mass spectrometry (LC-QTOF-MS)

An assessment of the sewage occurrence and biodegradability of seven parabens and three halogenated derivatives of methyl paraben (MeP) is presented. Several wastewater samples were collected at three different wastewater treatment plants (WWTPs) during April and May 2010, concentrated by solid-phase extraction (SPE) and analysed by liquid chromatography-electrospray-quadrupole-time-of-flight mass spectrometry (LC-QTOF-MS). The performance of the QTOF system proved to be comparable to triple-quadrupole instruments in terms of quantitative capabilities, with good linearity (R² > 0.99 in the 5-500 ng mL⁻¹ range), repeatability (RSD < 5.6%) and LODs (0.3-4.0 ng L⁻¹ after SPE). MeP and n-propyl paraben (n-PrP) were the most frequently detected and the most abundant analytes in raw wastewater (0.3-10 μg L⁻¹), in accordance with the data displayed in the bibliography and reflecting their wider use in cosmetic formulations. Samples were also evaluated in search for potential halogenated by-products of parabens, formed as a result of their reaction with residual chlorine contained in tap water. Monochloro- and dichloro-methyl paraben (ClMeP and Cl₂MeP) were found and quantified in raw wastewater at levels between 0.01 and 0.1 μg L⁻¹. Halogenated derivatives of n-PrP could not be quantified due to the lack of standards; nevertheless, the monochlorinated species (ClPrP) was identified in several samples from its accurate precursor and product ions mass/charge ratios (m/z). Removal efficiencies of parabens and MeP chlorinated by-products in WWTPs exceeded 90%, with the lowest percentages corresponding to the latter species. This trend was confirmed by an activated sludge biodegradation batch test, where non-halogenated parabens had half-lives lower than 4 days, whereas halogenated derivatives of MeP turned out to be more persistent, with up to 10 days of half-life in the case of dihalogenated derivatives. A further stability test performed with raw wastewater also showed that parabens degrade rapidly in real sewage, with half-lives lower than 10 h for n-butyl-paraben, while dihalogenated species again turned out to be more stable, with half-lives longer than a week.     

Behavior of pharmaceuticals, cosmetics and hormones in a sewage treatment plant

Two cosmetic ingredients (galaxolide, tonalide), eight pharmaceuticals (carbamazepine, diazepam, diclofenac, ibuprofen, naproxen, roxithromycin, sulfamethoxazole and iopromide) and three hormones (estrone, 17beta-estradiol and 17alpha-ethinylestradiol) have been surveyed along the different units of a municipal Sewage Treatment Plant (STP) in Galicia, NW Spain. Among all the substances considered, significant concentrations in the influent were only found for the two musks (galaxolide and tonalide), two anti-inflammatories (ibuprofen and naproxen), two natural estrogens (estrone, 17beta-estradiol), one antibiotic (sulfamethoxazole) and the X-ray contrast medium (iopromide), where the other compounds studied were below the limit of quantification. In the primary treatment, only the fragrances (30-50%) and 17beta-estradiol (20%) were partially removed. On the other hand, the aerobic treatment (activated sludges) caused an important reduction in all compounds detected, between 35% and 75%, with the exception of iopromide, which remained in the aqueous phase. The overall removal efficiencies within the STP ranged between 70-90% for the fragrances, 40-65% for the anti-inflammatories, around 65% for 17beta-estradiol and 60% for sulfamethoxazole. However, the concentration of estrone increased along the treatment due to the partial oxidation of 17beta-estradiol in the aeration tank.