A study of the impact of instability on relative permeability and capillary pressure

Because of the rapid changes in saturation which take place in the immediate vicinity of a displacement front, it is not possible to estimate relative permeabilities over the entire saturation range of interest when using the external-drive method. It is demonstrated in this study that this limitation can be removed, if data from an unstabilized and/ or unstable displacement are used. Furthermore, it is shown that use of such data is permissible, provided: (a) saturation profiles and pressure gradients in both phases can be measured directly; (b) the external-drive theory is modified to account for the existence of capillary pressure gradients; and (c) the analysis is carried out from a Lagrangian rather than a Eulerian point of view.A comparison of relative permeabilities obtained by using the Lagrangian method with those obtained using the conventional (without capillary pressure term) and the modified (with the capillary pressure term) Eulerian methods was undertaken to demonstrate the effect of the neglect of the capillary pressure term on relative permeabilities. Also investigated in this study was the impact of instability on the relative permeability and capillary pressure curves for unstable displacements and the effect of instability on the saturation profiles, fractional flow curves and the residual oil saturation. In addition, the effect of instability on the residual oil saturation was studied.     

Visual attention model based dual watermarking for simultaneous image copyright protection and authentication

Multimedia Tools and Applications - In this paper, a visual attention model based dual watermarking scheme has been proposed for simultaneous image copyright protection and authentication. The...     

Study on crosslinked gelatin–montmorillonite nanoparticles for controlled drug delivery applications

Gelatin, because of its biodegradability and ecofriendly nature, has been the best choice for controlled release applications. Montmorillonite (MMT) clay shows a very important role in controlling drug delivery. Hence, an attempt was made in this work to prepare gelatin–MMT nanoparticles by desolvation method using acetone as precipitating agent, glutaraldehyde (GA) as crosslinking agent, and water as reaction media for controlled delivery of isoniazid, a drug for tuberculosis. Characterization of the MMT and isoniazid-loaded gelatin–MMT nanoparticles was carried out using Fourier transform infrared spectroscopy, X-ray diffraction study, scanning electron microscopy study, and transmission electron microscopy study. The effect of MMT on gelatin nanoparticles was evaluated in terms of water uptake studies, and subsequently to the release of isoniazid drug in buffer solution at pH 1.2 (gastric pH) and pH 7.4 (intestinal pH). Swelling experiment indicated that the gelatin nanoparticles were very sensitive to the pH environment. The release profile of drug was studied by a UV–Visible spectrophotometer. Cytotoxicity study revealed that MMT-containing nanoparticles showed less cytotoxicity than MMT-free nanoparticles.     

Analysing the novated design and construct contract from the client's,design team's and contractor's perspectives

The novated design and construct (ND&C) contract is one of the increasingly preferred options among developers of large commercial and residential projects across Australia. As a consequence of novation, the design team's obligation to the client gets transferred to the contractor who becomes responsible for carrying out the detailed design work at a later stage of project life cycle. Subsequently, there are some inherent factors that can depict the effectiveness of how all parties in the process interact leading to a successful delivery of project through ND&C contracts. A common set of 31 influencing attributes have been identified through a systematic research approach and their relative significance and impacts have been determined based on a structured questionnaire survey in selected construction projects. By performing the factor analysis, a total of eight factors significant to ND&C contracts were extracted, namely (1) impact of initial design; (2) client's involvements in post novation design; (3) selection of design team; (4) contractor's obligation; (5) morale in post novation; (6) experience of design team; (7) relationship between contractor and design team; and (8) expertise of DT in ND&C projects. With a clear understanding of the roles of clients, design team and the contractors, these findings could potentially contribute to develop a company's procedures or enhance existing knowledge in relation to the ND&C procurement approach.     

Effect of silica doping on the densification and grain growth in zinc oxide

The ability of silica (SiO₂) in controlling the densification and grain growth behavior of nano crystalline zinc oxide (ZnO) has been systematically studied. It has been observed that SiO₂ acts as a sintering inhibitor in the ZnO–SiO₂ system up to 4 wt.% limiting value beyond which densification behavior of the system remains almost unchanged, especially above 1100 °C. The addition of SiO₂ to ZnO retards grain growth which in turn results a finer ultimate grain size as compared to the undoped ZnO. However, stabilization in grain size occurs at ≥4 wt.% SiO₂ addition. It has been observed that SiO₂ incorporation changes the grain growth mechanism up to 4 wt.% addition, beyond which no remarkable changes was noticed. The grain growth (n) shows distinctly different slopes as a function of sintering time for the SiO₂ doped ZnO systems than undoped ZnO. The different slopes tend to indicate that different diffusion mechanisms and probably the formation of a secondary phase (Zn–Si–O) at the grain boundary control the densification and grain growth. The thermal expansion coefficient of the system has been found to decrease substantially beyond 4 wt.% SiO₂ addition to ZnO.     

Nanostructures from Single Amino Acid‐Based Molecules: Stability,Fibrillation, Encapsulation,and Fabrication of Silver Nanoparticles

The small‐sized molecules that have been developed from single hydrophobic amino acids (Phe, Trp, Tyr and Leu) by suitably protecting the –NH₂ and –CO₂H groups generate diverse nanoscopic structures – such as nanorods, nanofibrils, nanotubes, and nanovesicles – depending upon the protection parameters and solvent polarity. The vesicular structures get disrupted in the presence of various salts, such as KCl, CaCl₂, (NH₄)₂SO₄ and N(n‐Bu)₄Br. Insertion of unnatural (o/m/p)‐aminobenzoic acids as a protecting group and the lack of conventional peptide bonds in the molecules give the nanostructures proteolytic stability. The nanostructures also show significant thermal stability along with a morphological transformation upon heat treatment. Our in vitro studies reveal that the addition of micromolar concentration “curcumin” significantly reduces the formation of amyloid‐like fibrils. These diverse nanostructures are used as a template for fabricating silver nanoparticles on their outer surfaces as well as in the inner part, followed by calcination in air which helps to obtain a 1D silver nanostructure. Furthermore, the nanovesicles are observed to encapsulate a potent drug (curcumin) and other biologically important molecules, which could be released through salt‐triggered disruption of vesicles.