Particulate matter emitted from ultrasonic humidifiers—Chemical composition and implication to indoor air

Household humidification is widely practiced to combat dry indoor air. While the benefits of household humidification are widely perceived, its implications to the indoor air have not been critically appraised. In particular, ultrasonic humidifiers are known to generate fine particulate matter (PM). In this study, we first conducted laboratory experiments to investigate the size, quantity, and chemical composition of PM generated by an ultrasonic humidifier. The mass of PM generated showed a correlation with the total alkalinity of charge water, suggesting that CaCO₃ is likely making a major contribution to PM. Ion chromatography analysis revealed a large amount of SO₄²⁻ in PM, representing a previously unrecognized indoor source. Preliminary results of organic compounds being present in humidifier PM are also presented. A whole-house experiment was further conducted at an actual residential house, with five low-cost sensors (AirBeam) monitoring PM in real time. Operation of a single ultrasonic humidifier resulted in PM_2.5 concentrations up to hundreds of μg m⁻³, and its influence extended across the entire household. The transport and loss of PM_2.5 depended on the rate of air circulation and ventilation. This study emphasizes the need to further investigate the impact of humidifier operation, both on human health and on the indoor atmospheric chemistry, for example, partitioning of acidic and basic compounds.     

FRANCESCA WOODMAN: WATER SPECIFIED

Paul de Man makes a distinction between interpretation and reading as that which finds meaning in a text versus an analysis of the relationship between a text’s rhetorical and grammatical dimensions, respectively. Interpretation, as he defines it, assumes that a text’s meaning is largely transparent and that there is no disharmony between how it means and what it means. Reading, on the other hand, makes no such assumptions: it shows how a text’s meaning cannot be reduced to grammar and seeks out moments of indeterminacy between its literal and figurative meanings. I propose a “reading” of Francesca Woodman’s photographs that demonstrates how the critical, largely feminist, literature on the artist engages in interpretation and thus fails to appreciate the artist’s exploration of photography’s conditions of representation. In the process, I argue that her photographs function like hypograms, a concept of de Man by way of Saussure, or infra-texts. In short, Woodman’s photographs are readings of photography and womanhood and her art defies conventional understandings of artistic identity and agency.     

Chromatographic characterisation of aptamer-modified poly(EDMA-co-GMA) monolithic disk format for protein binding and separation

The introduction of aptameric ligands onto disk-monolithic adsorbent, representing a unique strategy for convective isolation of target molecules with high specificity and selectivity, is investigated for the first time. Experimental results showed that the disk monolith possessed a good permeability of 1.67 ± 0.05 × 10^–14 m² (RSD = 3.2%). The aptameric ligand density for the aptamer-modified disk monolith was 480 pmol/uL. Chromatographic analysis of the aptamer disk-monolith efficiency showed an optimum linear velocity of 126 cm/min (≈0.25 mL/min) at room temperatures 25 ± 2°C. The theoretical number of plates corresponding to the optimum linear velocity was 128.2 with an height equivalent to the theoretical plate of 0.022 mm. The disk aptamer-immobilised monolithic system demonstrated good selectivity and isolation of thrombin from non-targets.     

Process parameter dependencies of continuous and pulsed laser modes on surface polishing of additive manufactured aluminium AlSi10Mg parts

Laser powder bed fusion is a well-established 3D printing technique for metal alloys, but exhibits a poor surface quality. Laser polishing provides the possibility of a fast contact-free and fully-automatable surface treatment. This paper deals with the experimental investigation of laser polishing of laser powder bed fusion parts made of aluminium AlSi10Mg. Laser polishing is done with a 4 kW solid state disc laser in combination with a multi-axis system and a one dimensional scanner optic. The laser is operated at continuous and pulsed operation mode. The parameter study reveals a high dependency of the achievable roughness on the laser beam intensity, the track and pulse overlap, the energy density and the number of polishing passes and polishing directions. Pulsed laser polishing mode with up to four passes from different directions revealed the lowest surface roughness of 0.14 μm Ra. With respect to the initial average surface roughness of Ra = 8.03 μm a reduction of the surface roughness of greater than 98 % could be achieved. Polishing with continuous laser radiation at one polishing pass resulted in Ra = 0.23 μm at an area rate of 20 cm²/min. Laser polishing using four passes achieved a further improvement up to Ra = 0.14 μm.     

Framing processes in planning disputes: analysing dynamics of contention in a housing project in Hong Kong

Opposition to planned housing projects can lead to considerable delays. Hong Kong is characterized by an executive-dominant planning system, whereby the government possesses strong planning powers, while elected district councillors play an advisory role only. Curiously, planning delays are fairly common. The above paradox is analysed in this paper through examining a major dispute over public housing development in Hong Kong. This dispute involved lengthy processes of bargaining, which were vulnerable to legitimacy challenges. Councillors acted strategically by tapping into prevailing social values to frame the legitimacy of bargaining processes. Despite discontent with these informal bargaining processes, the dispute has not evolved into more radical challenges to existing governance arrangements. The paper concludes by considering how hegemonic discourses of planning efficiency may have constrained the emergence of radical contention, which adds to broader debates about the conditions which shape the trajectories and transformative prospects of contentious urban developments.     

Flash Sintering using Controlled Current Ramp

In conventional flash sintering, the current rises nonlinearly to a set current limit, accompanied by a spike in the power density. This sudden power spike may cause hot spot formation, in which current preferentially channels through a small area, causing localized melting while other areas remain unsintered. By using a controlled current ramp early on the sudden power spike can be avoided. In addition, by changing the ramp rate material properties such as porosity, grain size and conductivity can be tuned.     

Damage microstructure evolution of helium ion irradiated SiC under fusion relevant temperatures

In-situ transmission electron microscopy (TEM) with ion irradiation has been used to study the damage microstructure evolution of He ion irradiated 4-H SiC at nuclear fusion relevant temperatures. The SiC samples were irradiated with 20?keV He ions at 25, 400, 800 and 1200?°C to a dose of 5.0 displacements per atom (DPA). At 25?°C, the material fully amorphises at 1.5 DPA and no He bubble nucleation occurs up to the doses studied. At 400 and 800?°C, He bubble nucleation occurs and the material remains crystalline. Bubble nucleation occurs at 2.0?DPA at 400?°C but occurs at only 0.5?DPA at 1200?°C. This is attributed the He atoms de-trapping from vacancies and migrating interstitially to larger He-vacancy clusters at higher temperatures, leading to faster nucleation of observable He bubbles. Helium platelets form at an irradiation temperature of 1200?°C at 0.5?DPA showing a preference for nucleation between the {0001} basal planes.