乙烯酮(双乙烯酮)下游产品废水的治理技术

乙烯酮(双乙烯酮)是十分重要的化工中间体,其下游产品较多。江苏某化工厂开发生产乙烯酮(双乙烯酮)下游产品三十多个,年生产规模三万多吨,是国内以乙烯酮(双乙烯酮)为中间体生产精细化学品的综合骨干企业。针对乙烯酮(双乙烯酮)下游产品废水特点,该厂结合企业实际,开展了产品优化,结构调整,清洁生产,资源循环利用,节水降耗等工作,从源头削减了污染物的生产。同时投资二千多万元新建预处理装置三套,6000m3/d废水生化处理装置一套,使全厂乙烯酮(双乙烯酮)下游产品的废水得到了有效的治理。     

Semi-empirical equation of state of metals. Equation of state of aluminum

A semi-empirical equation of state for metals is described. Its capabilities are demonstrated by the example of the equation of state for aluminum. New experimental data are presented on the location of the isentrope of aluminum for unloading from the state at p = 229.71 GPa on the shock adiabat to an aerogel (SiO₂) of density 0.08 g/cm³. __________ Translated from Fizika Goreniya i Vzryva, Vol. 44, No. 2, pp. 61–75, March–April, 2008.     

水泥水化热测定方法综述

水泥水化热是中、低热水泥和核电工程用水泥的一项关键的技术指标。全球范围内测定水泥水化热的方法有溶解法、直接法/半绝热法、等温传导量热法三种。本文总结了中、美、欧相关方法标准,对其测试原理、仪器设备、试验过程等方面进行了比对,并对其在领域的应用做了简单的概括。     

Calorimetric and Computational Study of Enthalpy of Formation of Diperoxide of Cyclohexanone

A thermochemical rather simple experimental technique is applied to determine the enthalpy of formation of Diperoxide of ciclohexanone. The study is complemented with suitable theoretical calculations at the semiempirical and ab initio levels. A particular satisfactory agreement between both ways is found for the ab initio calculation at the 6–311G basis This set level. Some possible extensions of the present procedure are pointed out.     

气化给煤系统故障分析

气化给煤装置自投运以来,出现了气化煤仓堵煤、称重给煤机输送皮带因跑偏而损伤以及清扫装置故障频繁等问题,多次造成气化系统减负荷运行。通过对出现的各种问题进行分析,找到了产生这些问题的原因,并有针对性地采用配煤和改进清扫链等措施,使出现的问题得到了极大的改善。     

几种乙炔加压设备性能的比较

阐述并比较了几种加压设备在乙炔加压清净过程中的性能和特点。     

醋酸纤维素取代基分布与性质的关系

分析了以吡啶为溶剂的醋酸纤维素的13C-NMR核磁共振谱,得出了三种不同位置羟基的取代度。结合X—射线和DSC分析,初步说明具有相同取代度但未经水解和经过水解的醋酸纤维素(CA) 性质上的差异是由于三个羟基上的取代度分布不同及消晶程度差异所致。     

Generalization of vdW type of equations of state

1 INTRODUCTIONBecause of importance of equations of state (EOS)in science and industry,hundreds forms of EOS havebeen presented since latter 19th century.It seems impossible to develop a general equation covering vari-ous kinds of EOS.But for cubic EOS,several generalequations have been reported already. Martin presented the first general equation whichis following p=RT/V-α(T)/(υ β)(υ γ) δ(T)/υ(υ β)(υ γ) (1) Kumar et a1.presented an equation called the most general form of a density-cubic or, alterna tively,volume-cubic mathematical equation,the form of which is as follows     

三种煤样燃烧热的测定

本文通过三个厂家提供的三种煤样燃烧热的测定,由测定结果综合得出3号煤样燃烧最完全、燃烧热也最大,是三个煤样中最好的一种。     

我国聚碳酸酯工业发展概况

介绍我国聚碳酸酯生产能力和消费需求,对聚碳酸酯在信息工业中的应用作了简短介绍     

MGD降烯烃喷嘴工业应用

MGD降烯烃喷嘴是一种新型降烯烃喷嘴，该喷嘴具有降低汽油烯烃含量，改善产品分布的特点。中石油哈石化分公司ⅢFCC装置应用该喷嘴后，汽油烯烃含量降低了约5个百分点，并可明显提高液化汽及柴油产率，经济效益明显。     

Effect of degree of deacetylation of chitosan on the kinetics of ultrasonic degradation of chitosan

The objective of the study was to explore the effect of the degree of deacetylation (DD) of the chitosan used on the degradation rate and rate constant during ultrasonic degradation. Chitin was extracted from red shrimp process waste. Four different DD chitosans were prepared from chitin by alkali deacetylation. Those chitosans were degraded by ultrasonic radiation to different molecular weights. Changes of the molecular weight were determined by light scattering, and data of molecular weight changes were used to calculate the degradation rate and rate constant. The results were as follows: The molecular weight of chitosans decreased with an increasing ultrasonication time. The curves of the molecular weight versus the ultrasonication time were broken at 1‐h treatment. The degradation rate and rate constant of sonolysis decreased with an increasing ultrasonication time. This may be because the chances of being attacked by the cavitation energy increased with an increasing molecular weight species and may be because smaller molecular weight species have shorter relaxation times and, thus, can alleviate the sonication stress easier. However, the degradation rate and rate constant of sonolysis increased with an increasing DD of the chitosan used. This may be because the flexibilitier molecules of higher DD chitosans are more susceptible to the shear force of elongation flow generated by the cavitation field or due to the bond energy difference of acetamido and β‐1,4‐glucoside linkage or hydrogen bonds. Breakage of the β‐1,4‐glucoside linkage will result in lower molecular weight and an increasing reaction rate and rate constant. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3526–3531, 2003     

PET结晶行为改进的研究进展

综述并分析了影响PET结晶行为的因素、改进措施及评价结晶行为参数的研究进展。     

塑料密度温度系数的测定

对HDPE、LDPE、PP、PS、ABS、EVA、PVC等常见塑胶粒的密度温度系数进行了测定。采用本文所测得的密度温度系数值,将常温下测得的密度值校正到指定温度下的密度值,这种方法可以满足塑料密度常规检验的要求。     

A Review of Contemporary Views of Theories of Adhesion

The once distinct and independent theories of adhesion have been losing their isolation and converging. Ideas of the effects of surface roughness, once dismissed as irrelevant except in the case of textiles, have been revised; albeit on a smaller scale as details of surfaces have been revealed by sophisticated techniques. Electrostatic interactions across an interface have been more deeply explored and their significance recognised and expounded. Diffusion of groupings and chain segments within a polymer have been related to the possibilities of interaction with a variety of surfaces. Perhaps most important, theories of adsorption have been extended in depth. The precise nature of the molecular interactions have been recognised and quantified. In doing this the contribution of diffusion and elastoplastic phenomena have been integrated. These developments are collated and analysed to present the present understanding of the concepts.     

塔设备改造选型的分析

就当前扩产增容中塔设备设计和改造时板式塔和填料塔的选型问题加以分析。在评述目前国内常用的几种塔板和新型填料之后，着重介绍一种新型塔板（导向梯形浮阀塔板）和一种新型填料（波环填料——乾隆帕克）。     

熟石膏陈化过程的研究进展

探讨了熟石膏陈化过程中无水石膏（AⅢ-CaSO₄）与水蒸气的反应机理以及二水石膏（CaSO₄·2H₂O）的脱水机理。首先介绍了熟石膏陈化过程的基本原理,然后讲解了熟石膏陈化过程中水蒸气在AⅢ-CaSO₄上的物理吸附与化学吸附,其后描述了熟石膏陈化过程中CaSO₄·2H₂O晶体的脱水行为与脱水动力学,最后提到了CaSO₄·2H₂O、CaSO₄·0.5H₂O、AⅢ-CaSO₄的晶体结构。     

小议汽车涂装工艺设计对涂装成本的影响

论述了涂装工艺设计对涂装设备投资、涂装生产成本的影响。     

平板硫化机横梁受热变形及热板中高度的应用

介绍了平板硫化机热板中高度在硫化排气过程中的作用及其实现途径和评价方法;提出了设置热板中高度时应遵守的＂刚性横梁、柔性热板＂概念和＂最短路径、最小排气阻力＂原则;探讨了横梁热变形对热板中高度的影响。结果表明,参考横梁热变形设置的热板中高度有助于解决平板硫化机在复杂状态下硫化制品时的表面排气问题。     

Measurement of the gradient of viscosity with composition of mixtures of non-ideal gases

A perturbation viscometer is a differential capillary viscometer that measures the logarithmic viscosity gradient of the viscosity-composition curve for gas mixtures. Measurements are made at different gas mixture compositions. Integration of the logarithmic viscosity gradients measured over the full composition range gives the mixture viscosity relative to the viscosity of one of the pure components of the gas mixture. This method is attractive because, for measurements of equal precision, integration of the gradients is potentially an order of magnitude more precise than measurement of the viscosities directly. It can also work at high and low temperatures and perhaps high pressures.The perturbation viscometer has been used to make measurements on ideal gas mixtures at ambient and elevated temperatures. The situation is more complicated when the gas mixtures are non-ideal. Extra effects due to density differences, molar volume change on mixing and differential thermal expansion may be measured in addition to the desired viscosity change producing systematic errors in the results. Thus, a more sophisticated apparatus is required. The standard perturbation viscometer has been modified to separate out the extra effects to permit measurement of the true change in viscosity. In addition, the theoretical operation of the modified apparatus has been revised to account for the design changes to permit calculation of the viscosity-composition profiles from the results.The apparatus has been tested using helium-HFC-125 mixtures and two new viscosity-composition profiles are presented for these mixtures at 23 and . Internal consistency tests have been used to confirm that the data produced are of high quality with an estimated uncertainty in the viscosity ratio data at of 0.9% and at of 1.5%.