Fabrication of Functionally Graded SiAlON Ceramics by Tape Casting

Functionally graded SiAlON ceramics (FG-SiAlONs) were successfully prepared by the tape casting and lamination approach. Non-aqueous SiAlON slurries with five different α to β-SiAlON ratios (85α:15β, 70α:30β, 55α:45β, 40α:60β, and 25α:75β) were prepared by a 66 methyl ethyl ketone/34 ethanol (vol%) mixture. Phase and microstructure analyses incorporation with hardness measurements clearly show that the FG-SiAlONs, prepared by tape casting, exhibit a continuous and gradual change in composition and hardness. Thus, the tape casting approach is a viable method to produce FG-SiAlONs with a precisely controlled composition, and subsequently properties, as a function of position.     

Die Abtrennung von Ölsäuremonoglycerid aus einem Glyceridgemisch mit Hilfe eines überkritischen Extraktionsmittels

Separation of Glycerol-monooleate from a Mixture of Glycerides by Means of a Supercritical Extractant The continuous separation of pure monoglycerides out of a mixture of glycerides by means of supercritical fluid extraction was investigated. As supercritical extracting agent carbon dioxide containing propane as an entrainer was used. The phase equilibria concerning the process were measured and are discussed. In an extraction apparatus consisting of an extraction column and two separators the viability of the process was tested. At 40°C and 120 bar a product with 99.5 wt.% monoglycerides was manufactured out of a mixture of glycerides containing 59 wt.% monoglycerides.     

A greedy gradient-simulated annealing selection hyper-heuristic

Educational timetabling problem is a challenging real world problem which has been of interest to many researchers and practitioners. There are many variants of this problem which mainly require scheduling of events and resources under various constraints. In this study, a curriculum based course timetabling problem at Yeditepe University is described and an iterative selection hyper-heuristic is presented as a solution method. A selection hyper-heuristic as a high level methodology operates on the space formed by a fixed set of low level heuristics which operate directly on the space of solutions. The move acceptance and heuristic selection methods are the main components of a selection hyper-heuristic. The proposed hyper-heuristic in this study combines a simulated annealing move acceptance method with a learning heuristic selection method and manages a set of low level constraint oriented heuristics. A key goal in hyper-heuristic research is to build low cost methods which are general and can be reused on unseen problem instances as well as other problem domains desirably with no additional human expert intervention. Hence, the proposed method is additionally applied to a high school timetabling problem, as well as six other problem domains from a hyper-heuristic benchmark to test its level of generality. The empirical results show that our easy-to-implement hyper-heuristic is effective in solving the Yeditepe course timetabling problem. Moreover, being sufficiently general, it delivers a reasonable performance across different problem domains.     

Effects of exogenous porcine somatotropin on the development of fat cells and fatty acid composition in backfat of live finishing pigs

The effects of long-term application of recombinant porcine somatotropin (pST) to Landrace pigs on the development of backfat thickness, fat cells and fatty acid composition were investigated from about the 116th to the 186th day of life. Biopsy samples from the backfat of 56 castrates were taken at the beginning of treatment and after 5 and 10 weeks. The daily injection of 2 or 4 mg of pST induced a considerable decrease in backfat growth compared to untreated controls. This was attributed to a decreased size (about 18–20%) and number (about 13–25%) of fat cells. The higher dose of 4 mg pST/day induced a greater restriction of fat growth. This was obviously based on differences in fat cell number. Furthermore, pST treatment delayed the normal decrease of unsaturated fatty acids (C 18:2; C 18:3) during the period of growth examined. Therefore, the percentages of unsaturated fatty acids increased, indicating changes in fat cell metabolism of pST treated pigs.     

Investigation on replication of microfluidic channels by hot embossing

In this study, effects of embossing temperature, time, and force on production of a microfluidic device were investigated. Polymethyl methacrylate (PMMA) substrates were hot embossed by using a micromilled aluminum mold. The process parameters were altered to observe the variation of replication rate in width and depth as well as symmetry of the replicated microfluidic channels. Analysis of variance (ANOVA) on the experimental results indicated that embossing temperature was the most important process parameter, whereas embossing time and force have less impact. One distinguishing aspect of this study is that, the channels were observed to be skewed to either side of the channel depending on the location of the protrusions on the mold. The mechanism of the skewness was investigated by finite element analysis and discussed in detail. Results showed that the skewness depends on the flow characteristics of the material and could be reduced by increasing the embossing temperature. The best replication rates were obtained at parameter settings of 115°C, 10?kN, and 8?min for the molds with minimum 56?µm wide features of 120?µm depth. We also showed that the fabricated channels could be successfully sealed by solvent-assisted thermo-compressive bonding at 85°C under 5.5?kN force.     

Frontal EMG-biofeedback training of athetoid cerebral palsy patients: a report of six cases

108 tendons of the m. extensor hallucis longus were examined with a tensile testing machine within 36 h after death. The specimen were kept at a resting length of 20 mm. After the "steady state" was reached by cyclic loading, the tendons were stretched up to a maximum load of 18 kp, then deloaded to a certain level and after that the elongation was kept constant. At high loading level the tension of the tendon decreases with time (relaxation). At medium and low loading level the tension increases slightly (mechanical recovery). Between that two regions there is a certain load, where the tension will not change with time (isorheological point). The position of the isorheological point depends on the velocity of the elongation. At low velocity (2 mm/min) the isorheological point is situated at 70%, at high velocity (12 mm/min) at 60% of the maximum load. One will find the maximum relaxation, when no deloading occurs. The mechanical recovery, however, has its maximum at 5--25% of the maximum load. But when the tendon is totally deloaded, there seems to occur no recovery. The maximum relaxation is 5 to 6 times larger than the maximum recovery. Supposingly the relaxation- and recovery-processses will happen at the same time but with different intensity depending on the loading level. At least the relaxation-process consists of different relaxation components with different relaxation times. This will explain the phenomenon of a "secondary relaxation": After a long time of registration the recovery will turn into a slight relaxation.     

Electrophoretic deposition of nano-sized BaTiO3

In this study, a non-aqueous method in a simple one pot reaction process was employed to synthesize nano-sized BaTiO₃ particles and then electrophoretic deposition technique was employed for thin film coatings. In the first step of the preparation, metallic barium is directly dissolved in benzyl alcohol at slightly elevated temperatures. Then titanium isopropoxide was added following by a solvothermal treatment. At the end of the reaction, nearly spherical BaTiO₃ nanoparticles were obtained typically 5 nm in diameter. After establishing the stability of the BaTiO₃ suspension in ethanol, electrophoretic deposition process was performed without any additional operation. Alumina with platinum plating was used as substrate. To achieve the optimal process parameters, various voltages were applied by altering the cathode to anode distance as well as deposition time. High voltages application was possible without causing hydrolysis, because of the non-aqueous ethanol medium with higher surface charge of the nanoparticles. The deposited surface coatings were dried in air and sintered at various temperatures. SEM, EDX and XRD analysis were employed for the investigation of the coating.     

Metallurgical Development in Steel‐plant‐internal Multi‐injection Hot Metal Desulphurisation

The use of thermodynamic, statistical, and light and electron‐optical microscopic methods has made it possible to analyse the course of reactions during steel‐plant‐internal hot metal desulphurisation. The theoretical dependence between oxygen and sulphur activity has been used to develop an EMF‐measurement‐based technique for determining the sulphur content as the hot metal is desulphurised. The absence of magnesium sulphide from the collection of phases in the final slag because of the greater stability and secondary formation of calcium sulphide has been explained with the aid of thermo‐chemical calculations.