Agronomic performance of high oleic,low linolenic soybean in Tennessee

Soybean oil hydrogenation alters the linolenic acid molecule to prevent the oil from becoming rancid, however, health reports have indicated trans-fat caused by hydrogenation, is not generally regarded as safe. Typical soybeans contain approximately 80 g kg⁻¹ to 120 g kg⁻¹ linolenic acid and 240 g kg⁻¹ of oleic acid. In an effort to accommodate the need for high-quality oil, the United Soybean Board introduced an industry standard for a high oleic acid greater than 750 g kg⁻¹ and linolenic acid less than 30 g kg⁻¹ oil. By combing mutations in the soybean plant at four loci, FAD2-1A and FAD2-1B, oleate desaturase genes and FAD3A and FAD3C, linoleate desaturase genes, and seed oil will not require hydrogenation to prevent oxidation and produce high-quality oil. In 2017 and 2018, a study comparing four near-isogenic lines across multiple Tennessee locations was performed to identify agronomic traits associated with mutations in FAD3A and FAD3C loci, while holding FAD2-1A and FAD2-1B constant in the mutant (high oleic) state. Soybean lines were assessed for yield and oil quality based on mutations at FAD2-1 and FAD3 loci. Variations of wild-type and mutant genotypes were compared at FAD3A and FAD3C loci. Analysis using a generalized linear mixed model in SAS 9.4, indicated no yield drag or other negative agronomic traits associated with the high oleic and low linolenic acid genotype. All four mutations of fad2-1A, fad2-1B, fad3A, and fad3C were determined as necessary to produce a soybean with the new industry standard (>750 g kg⁻¹ oleic and <30 g kg⁻¹ linolenic acid) in a maturity group-IV-Late cultivar for Tennessee growers.     

The impacts of cattle access points on deposited sediment levels in headwater streams in Ireland

Cattle access to streams has been linked globally with degradation of stream water quality, driven largely by bank erosion and resultant instream, fine sediment deposition. The majority of evidence on such effects is however based in arid and semiarid regions of the United States and Australia, with few studies relating to cool temperate climates such as Northwest Europe. In this study, “Quorer” resuspendable sediment samples were taken from riffle geomorphic units upstream (control) and at two points downstream (pressure and recovery) of cattle access points in headwater streams in agricultural catchments in Ireland to assess levels of deposited stream sediment. Samples were taken in April/May (2016) prior to the grazing season and in October (2016) at the end of the grazing season. Sites in good‐high ecological status catchments and less than good ecological status catchments were included in the study. Higher levels of sediment were found downstream of cattle access points in both good‐high status and less than good status catchments; however, the impacts of access points were spatially confined to, in most cases, the area immediately downstream of the point of access. There was a strong correlation between deposited sediment mass and organic matter (OM) mass, with levels of OM increasing linearly with deposited sediment mass. Levels of measured sediment were negatively correlated with riparian habitat health (measured using a qualitative habitat assessment). The results of this study highlight the need for measures to prevent cattle access to headwater streams where access points can be many in order to manage local habitat quality and downstream water quality issues.     

Modelling and optimization of a flexible poly(vinyl chloride) compound formulation for mine cables

Developments by Labuschagné et al. (Patent, WO 2006/123284 A2, 2006) in the manufacture of Layered Double Hydroxides (LDHs) have led to a patent describing a new effluent free synthesis method. A promising application for the LDH is as an additive for a flexible poly(vinyl chloride) (PVC) compound used for the insulation for cables used in South African underground mines. Consequently, a new formulation is required. Unfortunately formulating a PVC compound is a complex problem. The purpose of the investigation is to develop a method that can be used to find an optimum PVC formulation where the material requirements are met while also allowing for the quantitative analysis of the effect of the ingredients on the material properties. This is achieved by modeling the thermal stability, fire retardancy, and basic mechanical properties of the compound as a function of the relative proportions of the ingredients using 2nd order Scheffé polynomials. The empirical models are determined using statistical experimental design. Each model is interpreted using statistical analysis of the model terms which allows for the quantification of the effects and interactions of all the ingredients on the various response variables. The models are also used as constraints in the optimization of the PVC formulation for minimum cost. Parametric analyses are done to demonstrate how the optimization can be used to analyze the entire system taking into account the cost performance of the ingredients. Finally, it is demonstrated how the above approach requires significantly less time and labor to find an optimum formulation than the traditional approach. J. VINYL ADDIT. TECHNOL., 25:E44–E58, 2019. © 2017 Society of Plastics Engineers     

A Machine Vision Sensor for Quality Control of Green Anode Paste Material

JOM - A machine vision sensor was developed for predicting deviations from the optimum amount of pitch in anode formulations using paste texture analysis. It could help operators mitigate the...     

Effects of breed and age at slaughter on degradation of muscle lipids during processing of dry‐cured hams

Hams from Landrace, Duroc and Hampshire pigs slaughtered at ages 6, 7.5 and 9 months were processed to generate Norwegian Parma‐style hams. Lipid contents and the compositions of fatty acid classes (ΣSFA, ΣMUFA, ΣPUFA) within neutral lipids, phospholipids and free fatty acids were determined. Small differences in lipid degradation and composition of the classes were revealed. However, significant sensory differences related to lipids were observed. Breed was more important than age. Dry‐cured Hampshire hams gave a more intense mature odour that may be associated with higher overall lipid degradation. Unexpectedly, these hams also demonstrated high juiciness and tenderness, which could be related to the melting characteristics of the fat. Dry‐cured Duroc hams showed a higher susceptibility towards rancidity, presumably associated with preferential oxidation of n‐6 fatty acids relative to C18:1 n‐9. Dry‐cured Landrace hams showed the lowest juiciness and tenderness, likely due to their lower fat content (marbling).     

Constant hue bands in boundary colors discovered using a new appearance model

Boundary colors are observed when light from a scene is dispersed by a prism or diffraction grating. We discovered that patterns with repeating black and white stripes can produce repeating bands of boundary colors with two hues. These hues are virtually constant as measured by chromaticity or CIELAB. We found seven cases of this kind using a new appearance model for boundary colors. The model correctly predicts that green and magenta bands recur as stripe widths and dispersion strength vary. The first green/magenta case in the sequence traces out an accurate ellipse in XYZ color space. Green and magenta bands are prominent in supernumerary rainbows and interference rings, and we explain why that might be the case. The explanation is based on an interesting property of the visible spectrum. In addition to the green/magenta cases, the other cases are orange/cyan, yellowish‐green/purple, and yellow/violet. The success of the boundary color appearance model implies that bands are perceived as if the wavelength responses of the cones were essentially independent, which contradicts the actual behavior of cones. © 2014 Wiley Periodicals, Inc. Col Res Appl, 40, 135–146, 2015     

Field Performance of High Oleic Soybeans with Mutant FAD2-1A and FAD2-1B Genes in Tennessee

Soybean [Glycine max (L.) Merr.] oil with high oleic acid (>75%) has increased oxidative stability and health benefits that are valuable for food, fuel, and industrial products. It has been determined that two naturally occurring mutations in genes FAD2-1A and FAD2-1B can combine to produce high oleic soybeans. The objective of this study was to test the effect of these mutant alleles on seed yield and oil and protein concentration. Molecular markers assisted in the creation of a population of 48 BC₃F_2:4 lines (93.75% expected genome commonality). Each line was classified into one of four genotypic groups where both FAD2-1A and FAD2-1B genes were either homozygous wild type or mutant, respectively. Twelve lines for each genotypic group were evaluated in three replications at six locations across Tennessee. There was no seed yield difference between the high oleic genotypic group and the other groups (P < 0.05). On the other hand, there were differences in fatty acid profiles and oil and protein concentrations. In combination, the mutant FAD2-1A and FAD2-1B alleles produced a mean of 803.1 g kg⁻¹ oleic acid. This is, on average, approximately 500 g kg⁻¹ more oleic acid compared to soybean lines with only one mutant FAD2-1 allele. The high oleic double mutant group had more total oil (228.0 g kg⁻¹) and protein (401.0 g kg⁻¹) compared to all other genotypic groups (P < 0.05). Overall, this specific combination of mutant FAD2-1A and FAD2-1B alleles appears to generate conventional high oleic soybeans without a yield drag.     

Residents' preferences for private amenities and trade-offs associated with various spatial densities and patterns

ABSTRACT

Northwest Arkansas planning policies, like a number of communities across the country, have identified goals working toward more sustainable, livable, and subsequently denser development patterns. However, the understanding of residents’ perceptions of such living arrangements is limited. This study provides a more nuanced understanding of Northwest Arkansas residents’ spatial preferences through a survey of residents’ preferences for private amenities and their trade-off with various spatial densities and patterns in support of sustainability. Results of the survey indicate a preference for, and experience with, single-family residential living arrangements and amenities, with the preponderance (80%) of survey respondents currently living in single-family housing. There is a preference for low-density neighborhoods even if it means sacrificing other amenities. This study is in alignment with previous research suggesting that people may learn to prefer where they live. Additionally, while the majority of survey respondents indicated a preference for communal greenspaces, renters are more likely to prefer communal greenspaces when compared to homeowners. This study indicates that attached, multi-family development and renter development in Northwest Arkansas should consider the provision of communal green spaces, walkable access to transit, and walkable access to services as desired amenities for those residents.