Localized corrosion of (lean) duplex stainless steels in immersion units of urban wastewater treatment plants

With lower alloying cost and higher mechanical properties, lean duplex stainless steels can be an alternative to the more commonly used austenitic stainless steels. However, these alloys are still not the preferred choice, probably due to a lack of field experience. A study was thus initiated in view of defining the limits of use of selected (lean) duplexes for urban wastewater treatment units. The present paper shows the localized corrosion performance of selected lean duplexes in chloride contaminated solutions. The results are compared with austenitic S30403 and S31603 and with the more standard duplexes S82441 and S32205. The effect of welding was also investigated. Exposures in field municipal wastewater plants were conducted for 1 year in low and high chloride content units. The results show that lean duplexes S32101 and S32202 can be used as alternatives to S30403 and S31603 in low chloride electrolytes. At 500 ppm of chloride content, duplex stainless steel S32304 showed better corrosion resistance than S30403 and S31603. For higher chloride contents (1000 ppm and above) the standard duplexes S82441 and S32205 shall be preferred.     

Pull-Down of Metalloproteins in Their Native States by Using Desthiobiotin-Based Probes

One-third of all proteins are estimated to require metals for structural stability and/or catalytic activity. Desthiobiotin probes containing metal binding groups can be used to capture metalloproteins with exposed active-site metals under mild conditions so as to prevent changes in metallation state. The proof-of-concept was demonstrated with carbonic anhydrase (CA), an open active site, Zn²⁺-containing protein. CA was targeted by using sulfonamide derivatives. Linkers of various lengths and structures were screened to determine the optimal structure for capture of the native protein. The optimized probes could selectively pull down CA from red blood cell lysate and other protein mixtures. Pull-down of differently metallated CAs was also investigated.     

Microstructural,mechanical and tribological properties of suspension plasma sprayed YSZ/h-BN composite coating

Brittleness, relative high friction coefficient and wear rate limit the applications of ceramic coatings as wear-resistant layers. However, because embedding additives with ceramic matrix has demonstrated to be an effective way to improve coating performances, different contents and size of h-BN were added into an YSZ suspension. Afterwards, the YSZ/h-BN composite coatings were manufactured by suspension plasma spray and their tribological analysis indicated that: i) the reduction of the friction coefficient and wear rate can be achieved by incorporating h-BN into YSZ coating. ii) finer h-BN particle is more helpful to enhance the tribological properties of the coating. iii) the optimum content is dependent on h-BN particle sizes. iv) when the contents and the size of the h-BN inclusion increase, the probability distribution of the micro-hardness can become bi-modal. Three worn surface conditions were summarized and their wear mechanisms were discussed as well.     

Methyltransferase Contingencies in the Pathway of Everninomicin D Antibiotics and Analogues

Everninomicins are orthoester oligosaccharide antibiotics with potent activity against multidrug-resistant bacterial pathogens. Everninomicins act by disrupting ribosomal assembly in a distinct region in comparison to clinically prescribed drugs. We employed microporous intergeneric conjugation with Escherichia coli to manipulate Micromonospora for targeted gene-replacement studies of multiple putative methyltransferases across the octasaccharide scaffold of everninomicin effecting the A₁, C, F, and H rings. Analyses of gene-replacement and genetic complementation mutants established the mutability of the everninomicin scaffold through the generation of 12 previously unreported analogues and, together with previous results, permitted assignment of the ten methyltransferases required for everninomicin biosynthesis. The in vitro activity of A₁- and H-ring-modifying methyltransferases demonstrated the ability to catalyze late-stage modification of the scaffold on an A₁-ring phenol and H-ring C-4’ hydroxy moiety. Together these results establish the potential of the everninomicin scaffold for modification through mutagenesis and in vitro modification of advanced biosynthetic intermediates.     

Survey of 1012 moldy dwellings by culture fungal analysis: Threshold proposal for asthmatic patient management

Different countries have tried to define guidelines to quantify what levels of fungi are considered as inappropriate for housing. This retrospective study analyzes indoor fungi by cultures of airborne samples from 1012 dwellings. Altogether, 908 patients suffering from rhinitis, conjunctivitis, and asthma were compared to 104 controls free of allergies. Portuguese decree law no 118/2013 (PDL118), ANSES (a French environmental and health agency) recommendations, and health regulations of Besançon University Hospital were applied to determine the rates of non‐conforming dwellings, which were respectively 55.2%, 5.2%, and 19%. Environmental microbiological results and medical data were compared. The whole number of colonies per cubic meter of air was correlated with asthma (P < 0.001) and rhinitis (P = 0.002). Sixty‐seven genera and species were detected in bedrooms. Asthma was correlated to Aspergillus versicolor (P = 0.004) and Cladosporium spp. (P = 0.02). Thresholds of 300 cfu/m³ for A. versicolor or 495 cfu/m³ for Cladosporium spp. are able to discriminate 90% of the asthmatic dwellings. We propose a new protocol to obtain an optimal cost for indoor fungi surveys, excluding surface analyses, and a new guideline to interpret the results based on >1000 cfu/m³ of whole colonies and/or above threshold levels for A. versicolor or Cladosporium spp.     

Managing the risk of a COVID-19 outbreak from border arrivals

In an attempt to maintain the elimination of COVID-19 in New Zealand, all international arrivals are required to spend 14 days in government-managed quarantine and to return a negative test result before being released. We model the testing, isolation and transmission of COVID-19 within quarantine facilities to estimate the risk of community outbreaks being seeded at the border. We use a simple branching process model for COVID-19 transmission that includes a time-dependent probability of a false-negative test result. We show that the combination of 14-day quarantine with two tests is highly effective in preventing an infectious case entering the community, provided there is no transmission within quarantine facilities. Shorter quarantine periods, or reliance on testing only with no quarantine, substantially increases the risk of an infectious case being released. We calculate the fraction of cases detected in the second week of their two-week stay and show that this may be a useful indicator of the likelihood of transmission occurring within quarantine facilities. Frontline staff working at the border risk exposure to infected individuals and this has the potential to lead to a community outbreak. We use the model to test surveillance strategies and evaluate the likely size of the outbreak at the time it is first detected. We conclude with some recommendations for managing the risk of potential future outbreaks originating from the border.     

Influence of Substrate Properties on the Formation of Suspension Plasma Sprayed Coatings

In this study, YSZ coatings were deposited on different substrate materials (stainless steel and aluminum) using suspension plasma spray technique. The effects of substrate properties (material, surface topology, temperature, and thickness) on the formation of coatings were investigated. The results showed that, with the identical spray parameters, the porosity is higher for the coatings deposited on aluminum than that on stainless steel due to the high thermal transfer ability of the former substrate material. The SEM results revealed that the microstructure of as-prepared coatings could be tailored from the vertical cracked structure to the columnar structure by increasing the substrate surface roughness and their formation mechanisms were discussed. The substrate preheating temperature has an influence on the microstructure of the coatings, especially in the interfacial region. Increasing the substrate temperature is an effective means for reducing the interface defects and for improving the adhesion of the coatings. With the increase in the substrate thickness, the quantity of the vertical cracks in the coatings is reduced and their width becomes narrower.