Structural,optical, cytotoxicity,and antimicrobial properties of MgO,ZnO and MgO/ZnO nanocomposite for biomedical applications

In this study, MgO nanoparticles were successfully fabricated and incubated inside ZnO NPs to form MgO/ZnO nanocomposite for biomedical applications. The x-ray diffraction analysis of MgO, ZnO, and MgO/ZnO has shown the single-phase x-ray diffraction patterns through X'pert High score. The crystallite sizes were calculated as 18 nm, 42 nm, and 53 nm, respectively. The average particle size of MgO, ZnO, and MgO/ZnO nanopowders depicted from secondary electron images of field emission electron microscopy were 56 nm, 400 nm, and 450 nm, respectively. The presence of MgO NPs inside ZnO NPs was confirmed by transmission electron microscopy. The elemental dispersive spectroscopy of MgO, given the peaks of oxygen and magnesium, also showed only zinc and oxygen peaks in ZnO, which confirms no other impurities in MgO and ZnO powders. The elemental analysis of MgO/ZnO nanocomposite showed the peaks of Zinc and Oxygen, along with a tiny peak of Mg. The photoluminescence and UV–vis spectroscopy revealed the absorbance fluorescence limit of the nanomaterials. Fourier transform infrared spectroscopy confirmed the several groups present in the nanocomposite. The biocompatibility of MgO, ZnO, and MgO/ZnO was observed with human peripheral blood mononuclear cells. The cytotoxicity studies were also performed against human cancer (liver and breast) cell lines. The MgO, ZnO, and MgO/ZnO exhibited the antimicrobial properties against Escherichia coli and Staphylococcus aureus.     

4D Printing of Shape Memory Materials for Textiles: Mechanism,Mathematical Modeling,and Challenges

Shape memory materials (SMMs) in 3D printing (3DP) technology garnered much attention due to their ability to respond to external stimuli, which direct this technology toward an emerging area of research, “4D printing (4DP) technology.” In contrast to classical 3D printed objects, the fourth dimension, time, allows printed objects to undergo significant changes in shape, size, or color when subjected to external stimuli. Highly precise and calibrated 4D materials, which can perform together to achieve robust 4D objects, are in great demand in various fields such as military applications, space suits, robotic systems, apparel, healthcare, sports, etc. This review, for the first time, to the best of the authors’ knowledge, focuses on recent advances in SMMs (e.g., polymers, metals, etc.) based wearable smart textiles and fashion goods. This review integrates the basic overview of 3DP technology, fabrication methods, the transition of 3DP to 4DP, the chemistry behind the fundamental working principles of 4D printed objects, materials selection for smart textiles and fashion goods. The central part summarizes the effect of major external stimuli on 4D textile materials followed by the major applications. Lastly, prospects and challenges are discussed, so that future researchers can continue the progress of this technology.     

Prospects of inedible plant oil-driven bio-lubricants for tribological characteristics – a review

ABSTRACT

Fossil fuel resource is on the draining stage which leads to an increment in the cost of the petroleum products. Nowadays, research is focused on the development of environmental friendly lubricants which are derivatives of renewable sources. Inedible plant oil-driven bio-lubricants are environmentally friendly because they are non-hazardous, biodegradable, as well as there is no emission of toxic gases. This study involves the characterisations, advantages, as well as utilisation of inedible plant oil-driven bio-lubricants as an alternative for tribological applications. This report presents the status about the global lubricant market as well as potential outlook. Inedible plant oil-driven bio-lubricants bear high viscosity, high lubricity, and high viscosity index which can enhance the equipment service life and has the ability to carry high load and results in minimum amount of metal traces during combustion.     

Influence of soil density on gas permeability and water retention in soils amended with in-house produced biochar

Biochar has been used as an environment-friendly enhancer to improve the hydraulic properties(e.g.suction and water retention) of soil.However,variations in densities alter the properties of the soil-biochar mix.Such density variations are observed in agriculture(loosely compacted) and engineering(densely compacted) applications.The influence of biochar amendment on gas permeability of soil has been barely investigated,especially for soil with diffe rent densities.The maj or obj ective of this study is to investigate the water retention capacity,and gas permeability of biochar-amended soil(BAS) with different biochar contents under varying degree of compaction(DOC) conditions.In-house produced novel biochar was mixed with the soil at different amendment rates(i.e.biochar contents of 0%,5% and 10%).All BAS samples were compacted at three DOCs(65%,80% and 95%) in polyvinyl chloride(PVC)tubes.Each soil column was subjected to drying-wetting cycles,during which soil suction,water content,and gas permeability were measured.A simplified theoretical framework for estimating the void ratio of BAS was proposed.The experimental results reveal that the addition of biochar significantly decreased gas permeability k_g as compared with that of bare soil(BS).However,the addition of 5%biochar is found to be optimum in decreasing kg with an increase of DOC(i.e.k_(g,65%) k_(g,80%) k_(g,95%)) at a relatively low suction range(200 kPa) because both biochar and compaction treatment reduce the connected pores.     

Fullerene polymer film as a highly efficient photocatalyst for selective solar fuel production from CO2

C₆₀-based polymeric systems have been constantly anticipated for sustainable solar energy conversion. Reported, herein is a C₆₀ polymer film as visible light active photocatalyst for efficient and selective reduction of CO₂ for the first time. The C₆₀ polymer photocatalyst is synthesized via covalent coupling of C₆₀ monomer units consisting of tetra substituted C₆₀-pyrene conjugates through spacer groups. The synthesized C₆₀ polymer photocatalyst possesses an extended network of well-defined repeating monomer units with good stability and visible light-induced photocatalytic activity. The enhanced visible light harvesting ability of C₆₀ polymer photocatalyst reasonably yields it with higher catalytic ability than its monomer unit. The C₆₀ polymer film photocatalyst upon coupling with the biocatalyst carries out highly selective visible light driven reduction of CO₂ to HCOOH (239.46 μmol). The tandem way of incorporating C₆₀ into visible light active polymeric films for continuous use may be highly rewarding for their extended photocatalytic activity for solar fuel production from CO₂. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48536.     

Durability of YSZ coated Ti2AlC in 1300°C high velocity burner rig tests

A thermal barrier coating (TBC) system survived 500 hours in aggressive, 1300°C burner rig testing. The yttria-stabilized zirconia (7YSZ) TBC was plasma sprayed on an oxidation-resistant Ti₂AlC-type MAX phase and tested in a jet fuel burner at 100 m/s, using 5 hours cycles. No coating spallation or surface recession was observed; Al₂O₃-scale growth produced a slight 2.4 mg/cm² mass gain. The coating surface exhibited craze-cracked colonies of [111]_flourite textured columns, with no visible moisture attack. The 20 μm alumina scale remained intact under the YSZ face, about twice that producing failure for TBC/superalloy systems. TiO₂ nodules, initially formed on the uncoated backside, were removed, and Al₂O₃ was etched through volatile hydroxides formed in water vapor (~10%). Overall, the test indicated exceptional stability of the YSZ/Al₂O₃/Ti₂AlC system under turbine conditions due in large part to close thermal expansion matching.     

Phase development and pore stability of yttria- and ytterbia-stabilized zirconia aerogels

High-porosity yttria- and ytterbia-stabilized zirconia aerogels offer the potential of extremely low thermal conductivity materials for high-temperature applications. Yttria- and ytterbia-doped zirconia aerogels were synthesized using a sol-gel approach over the dopant range of 0-20 atomic percent. Surface area, pore volume, and morphology of the as-dried aerogels and materials thermally exposed for short periods of time to temperatures up to 1200°C were characterized by nitrogen physisorption, scanning and transmission electron microscopy, and X-ray diffraction. The aerogels as supercritically dried all were X-ray amorphous. At a 5% dopant level, a tetragonal structure with a smaller monoclinic phase developed on thermal exposure. Mixed tetragonal and cubic phases or predominantly cubic materials were observed at higher dopant levels, depending on the dopant level, temperature and exposure time. The formation of crystalline phases was accompanied by loss of surface area and pore volume, although some mesoporous structure was maintained on short-term exposure to 1000°C. Incorporation of the smaller Yb atom into the lattice structure resulted in smaller lattice dimensions on crystallization than was seen with Y doping and favored a more highly equiaxed structure. Aerogels synthesized with 15% Y maintained the smallest particle size without evidence of sintering at 1100°C. Largest shrinkage and loss of pore volume occurred on crystallization from the amorphous phase, with further loss of pores at temperatures above 1000°C attributable to changes in lattice parameters.     

Insights into structural difference between sodium polyacrylate PAA and sodium polymethacrylate PMA in salt solutions investigated by molecular simulations

Journal of Materials Science - The difference in the structural properties of highly charged polyacrylic acid (PAA) and polymethacrylic acid (PMA) is investigated by atomistic molecular dynamics...     

Enhanced α-Mn2O3 nanorods synthesized by one-pot hydrothermal route for supercapacitors

Journal of Materials Science: Materials in Electronics - Pseudo-capacitors are the emerging energy storage devices which forms a bridge between batteries and conventional capacitors. In the present...