Predicting nitrogen leaching with the modified LEACHM model: validation in soils receiving long-term application of animal manure composts

A variety of process-based models have been developed for predicting nitrogen (N) dynamics in agro-ecosystem; however, no reliable models have been validated for N leaching from soils receiving a long-term application of different types of animal manure composts. The Leaching Estimation and Chemistry Model (LEACHM) was recently modified by incorporating the basic structure of Rothamsted Carbon Model for extending its ability to describe soil organic matter decomposition and subsequent N leaching in soils rich in organic matter. We evaluate the applicability of the modified LEACHM in cropped Yellow soils receiving 10-year application of cattle or swine manure compost in addition to chemical fertilizers, where high-frequency field monitoring data of soil water contents, soil N contents and leachate N concentrations were available for the last 3 years. Particular attention was paid to determine all input parameters from independent measurements, parameterization from known soil properties or databases without optimisation to fit the measured field data. The model reasonably predicted temporal changes in the soil NH₄-N and NO₃-N contents, and inorganic N concentrations in the leachate as well as their differences due to different manure compost/chemical fertilizer applications. The simulations of leached N concentration yielded a Willmott index of agreement (IA) of 0.62–0.68, with those for soil moisture, soil nitrate content and crop N uptake all within an acceptable IA range. In view of the good performance without site-specific calibrations, the modified LEACHM appears to be a valuable tool for predicting N leaching from cropped soils receiving long-term manure compost applications.     

Interface control for resolved CFD-DEM with capillary interactions

In this work, a resolved CFD–DEM coupling model for the simulation of gas-liquid-solid flows is developed: the interface capturing method based on the colour function is employed for fluids (i.e. a gas and liquid) whilst Discrete Element Method (DEM) is used for particles. The Volume Penalisation (VP) method is adopted to consider the hydrodynamic interactions between fluids and particles along with the Immersed Free Surface (IFS) method, which artificially extends the gas-liquid interface into the interior of the particle to account for the wettability. The unique point of the proposed model is that the thickness of the gas-liquid interface can be controlled by using both interface compression and diffuse interface techniques simultaneously. From the simulation results, it is presented that the accurate evaluation of the surface tension force as well as the capillary force can be achieved by appropriately controlling the interface thickness. Moreover, the major two methods in the literature to calculate the capillary force are compared in this work. The validity of the proposed model is presented for both static and dynamic cases. The behaviour of two colliding particles with a dynamic liquid bridge is then simulated to demonstrate the applicability of the proposed model to a complex three-phase system.     

A generation method of artificial fluctuation data of wind power output considering smoothing effect

To use realistic wind power fluctuation data is important in simulating frequency change of power systems. It is well known that the smoothing effect must be taken into account when generating the artificial wind power output. Therefore, this paper proposed a new method to generate fluctuation waveform considering smoothing effect based on random number to fulfill the correlation among multiple sites and autoregression model. The effectiveness of the proposed method was tested by using practical wind speed data measured in Tohoku district.     

Acetaminophen-Induced Rat Hepatotoxicity Based on M1/M2-Macrophage Polarization,in Possible Relation to Damage-Associated Molecular Patterns and Autophagy

Overdose of acetaminophen (APAP), an antipyretic drug, is an important cause of liver injury. However, the mechanism in the rat model remains undetermined. We analyzed APAP-induced hepatotoxicity using rats based on M1/M2-macrophage functions in relation to damage-associated molecular patterns (DAMPs) and autophagy. Liver samples from six-week-old rats injected with APAP (1000 mg/kg BW, ip, once) after 15 h fasting were collected at hour 10, and on days 1, 2, 3, and 5. Liver lesions consisting of coagulation necrosis and inflammation were seen in the affected centrilobular area on days 1 and 2, and then, recovered with reparative fibrosis by day 5. Liver exudative enzymes increased transiently on day 1. CD68⁺ M1-macrophages increased significantly on days 1 and 2 with increased mRNAs of M1-related cytokines such as IFN-γ and TNF-α, whereas CD163⁺ M2-macrophages appeared later on days 2 and 3. Macrophages reacting to MHC class II and Iba1 showed M1-type polarization, and CD204⁺ macrophages tended to be polarized toward M2-type. At hour 10, interestingly, HMGB1 (representative DAMPs) and its related signals, TLR-9 and MyD88, as well as LC3B⁺ autophagosomes began to increase. Collectively, the pathogenesis of rat APAP hepatotoxicity, which is the first, detailed report for a rat model, might be influenced by macrophage functions of M1 type for tissue injury/inflammation and M2-type for anti-inflammatory/fibrosis; particularly, M1-type may function in relation to DAMPs and autophagy. Understanding the interplayed mechanisms would provide new insight into hepato-pathogenesis and contribute to the possible development of therapeutic strategies.     

High permittivity BaTiO3 and BaTiO3-polymer nanocomposites enabled by cold sintering with a new transient chemistry: Ba(OH)2∙8H2O

Cold sintering process (CSP) offers a promising strategy for the fabrication of innovative and advanced high permittivity dielectric nanocomposite materials. Here, we introduce Ba(OH)₂?8H₂O hydrated flux as a new transient chemistry that enables the densification of BaTiO₃ in a single step at a temperature as low as 150 °C. This remarkably low temperature is near its Curie transition of 125 °C, associated with a displacive phase transition. The cold sintered BaTiO₃ shows a relative density of 95 % and a room temperature relative permittivity over 1000. This new hydrated flux permits the fabrication of a unique dense BaTiO₃-polymer nanocomposite with a high volume fraction of ceramics ((1-x) BaTiO₃ – x PTFE, with x = 0.05). The composite exhibits a relative permittivity of approximately 800, at least an order of magnitude higher than previous reports on polymer composites with BaTiO₃ nanoparticle fillers that are typically well below 100. Unique high permittivity dielectric nanocomposites with enhanced resistivities can now be designed using polymers to engineer grain boundaries and CSP as a processing method opening up new possibilities in dielectric materials design.     

Long terminal linear alkyl group as internal crystallization accelerating moiety of poly(l-lactide)

Poly(l-lactide) (PLLA) polymers having terminal n-alkyl groups with a wide variety of lengths (C₀–C₂₂) were synthesized by ring-opening polymerization of l-lactide in the presence of coinitiators of l-lactic acid (C₀), 1-hexanol (C₆), 1-dodecanol (C₁₂), and 1-docosanol (C₂₂) and their segmental mobility and non-isothermal and isothermal crystallization behavior were investigated by differential scanning calorimetry (DSC) and wide-angle X-ray diffractometry (WAXD). Glass transition and cold crystallization temperatures of melt-quenched samples during heating decreased with an increase in the length of terminal n-alkyl groups. The enhanced PLLA segmental mobility and hydrophobic interaction-based accelerated PLLA nucleation by the presence of terminal long n-alkyl groups should have caused the accelerated non-isothermal and isothermal crystallization of PLLA segments traced by cold crystallization temperature during heating and by radial growth rate of spherulites, respectively. The crystallization accelerating effect became higher with the length of terminal n-alkyl groups. The effects of the length of terminal n-alkyl group on the crystalline growth mechanism of PLLA at the lowest crystallizable temperature was insignificant, whereas the effects of the length of terminal n-alkyl group on the nucleation mechanism of PLLA chains were significant and insignificant for PLLA having M_n of 6–7 × 10³ of 2 × 10⁴ g mol⁻¹, respectively. WAXD measurements revealed that the transition crystallization temperature at which crystalline modification changes from δ-form to α-form was affected by the length of terminal n-alkyl group for PLLA having M_n of 6–7 × 10³ g mol⁻¹, but was not altered by the length of terminal n-alkyl group for PLLA having M_n of 2 × 10⁴ g mol⁻¹.     

Cobalt powdersintering industry (stone cutting diamond wheels): a study of environmental-biological monitoring, workplace improvement and health surveillance

This communication deals with an aspect of occupational hygiene in a factory producing granite cutting diamond wheels by sintering, in moulds, of fine cobalt powder. The factory has been studied between 1988 and 1991; the Department of Preventive and Occupational Medicine of the Local Sanitary Unit of Reggio Emilia has followed the evolution of the local exhaust ventilation equipment supplied by the employer in that period. At the same time, the following measurements and observations were carried out: (a) cobalt exposure by personal sampling, (b) airborne cobalt measurements by area sampling, (c) biological monitoring of cobalt in urine, (d) health surveillance.     

Microstructure evolution during thermomechanical processing in 3Mn-0.1C medium-Mn steel

ABSTRACT

Medium-Mn steels are energetically investigated as a candidate of the third generation advanced high strength steels (AHSSs). However, their phase transformation and microstructaure evolution during various heat treatments and thermomechanical processing are still unclear. The present study first confirmed the kinetics of static phase transformation behaviour in a 3Mn-0.1C medium-Mn steel. Hot compression tests were also carried out to investigate the influence of high-temperature deformation of austenite on subsequent microstructure evolution. It was found that static ferrite transformation was quite slow in this steel, but ferrite transformation was greatly accelerated by the hot deformation in austenite and ferrite two-phase regions. Characteristic dual-phase microstructures composed of martensite and fine-grained ferrite were obtained, which exhibited superior mechanical properties.

This paper is part of a Thematic Issue on Medium Manganese Steels.     

Speed control of general‐purpose engine with electronic governor

This paper presents a general‐purpose engine speed control system with an electronic governor in order to improve the current system with a mechanical governor, which shows unstable characteristics as a result of a change in mechanical friction or the A/F ratio (air–fuel ratio). The control system above has the problems that the feedback signal is only the crank angle because of cost, and the controlled object is a general‐purpose engine, which is strongly nonlinear. In order to overcome these problems, a system model is presented for dynamic estimation of the amount of air flow, and a robust controller is designed. In concrete terms, the proposed system includes a robust sliding‐mode controller using the feedback signal of only the crank angle, with a genetic algorithm applied to the controller design. Simulations and experiments performed using Matlab/Simulink show the effectiveness of our proposal. © 2012 Wiley Periodicals, Inc. Electr Eng Jpn, 179(2): 64–71, 2012; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21130     

Supramolecular morphology of two-step melt-spun poly(dioxanone) fibers

Structure of poly(dioxanone) (PPDX) fibers produced through a two-step melt-spinning process with an additional short-period annealing above the melting temperature of PPDX was investigated and the effect of annealing on the degradation behavior was discussed. The morphological study carried out by etching the fibers using a phosphate or permanganate solution suggested that the fibers take a skin–core structure, and both the skin layer and the core region consist of a bundle of microfibrils. The micro-beam X-ray diffraction analysis revealed that the short-period annealing in the production process only slightly promotes the crystallization in the skin layer but contributes to increasing the packing of amorphous chains near the skin, which seems to be the controlling factor of the hydrolytic degradation behavior of the fibers.