Reduction of Ripple Current Loss by Electromagnetic Coupling of Air‐Core Reactors

To reduce the loss due to ripple current in a multiphase current‐reversible chopper, we investigated electromagnetic coupling of an air‐core reactor. We derived the relationship between the amplitude of the ripple current, the duty factor, and the electromagnetic coupling coefficient, and used the results to estimate the effects of electromagnetic coupling in the design of a train energy storage system. We built reactors with electromagnetic coupling coefficients of 0.93 and 0.60. These reactors employed a new winding structure that provides an optimal electromagnetic coupling coefficient. The mass of the former type of reactor was increased by 4.4% over the conventional design, and that of the latter type of reactor was decreased by 17%. Finally, we tested the new reactors. When the chopper employs the former type of reactor and operates with equal‐phase switching and cumulative coupling, the loss due to ripple current is decreased by 11%. When the chopper employs the latter type of reactor and operates with shift‐phase switching and differential coupling, the loss is decreased to 31%. The test showed that the calculated relationships agreed with the measured values.     

Direct Growth of Germanene at Interfaces between Van der Waals Materials and Ag(111)

Germanene, a 2D honeycomb germanium crystal, is grown at graphene/Ag(111) and hexagonal boron nitride (h-BN)/Ag(111) interfaces by segregating germanium atoms. A simple annealing process in N₂ or H₂/Ar at ambient pressure leads to the formation of germanene, indicating that an ultrahigh-vacuum condition is not necessary. The grown germanene is stable in air and uniform over the entire area covered with a van der Waals (vdW) material. As an important finding, it is necessary to use a vdW material as a cap layer for the present germanene growth method since the use of an Al₂O₃ cap layer results in no germanene formation. The present study also proves that Raman spectroscopy in air is a powerful tool for characterizing germanene at the interfaces, which is concluded by multiple analyses including first-principles density functional theory calculations. The direct growth of h-BN-capped germanene on Ag(111), which is demonstrated in the present study, is considered to be a promising technique for the fabrication of future germanene-based electronic devices.     

Perpendicular oriented cylinders via directional coalescence of spheres embedded in block copolymer films induced by solvent annealing

Polystyrene-b-poly(methyl acrylate) (PS-b-PMA) block copolymer with PS volume fraction of 25.2 vol% was synthesized by atom transfer radical polymerization. Non-pretreated silicon wafers were used as the substrates to prepare perpendicular oriented PS cylinders in PMA matrix via solvent annealing which could induce the transformation of spheres to vertically oriented and hexagonally packed cylinders. The spherical microdomains were formed after the evaporation of solvents from the solutions of the block copolymer in selective solvents mixed from methanol, acetone and dichloromethane. The thickness of films could be as thick as 1000 nm, which were much thicker than usual cases and the cylinders came from the directional coalescence of the spheres, thus any pre-treatments of the substrates were not required for perpendicular orientation. The structures were characterized by small angle X-ray scattering (SAXS), transmission electron microscope (TEM), atom force microscopy (AFM) and grazing incidence small angle X-ray scattering (GISAXS).     

Effect of α-substituents on molecular motion and wetting behaviors of poly(fluoroalkyl acrylate) thin films with short fluoroalkyl side chains

The effect of α-substituent on the molecular motion and wetting behavior of poly{2-(perfluorobutyl)ethyl acrylate} [PFA-C₄], poly{2-(perfluorobutyl)ethyl methacrylate} [PFMA-C₄], poly{2-(perfluorobutyl)ethyl α-fluoroacrylate} [PFFA-C₄], and poly{2-(perfluorobutyl)ethyl α-chloroacrylate} [PFClA-C₄] films were characterized by dynamic contact angle measurement, lateral force microscopy (LFM), wide angle X-ray diffraction (WAXD), and X-ray photoelectron spectroscopy (XPS). WAXD of oriented PFClA-C₄ fiber suggested the presence of rod-like chain due to the presence of bulky α-substituent. The glass transition temperature (T_g) of PFFA-C₄ and PFClA-C₄ were well above the room temperature. The water repellencies of PFFA-C₄ and PFClA-C₄ were as high as that of PFMA-C₄ and their oil repellency of PFFA-C₄ and PFClA-C₄ was higher than the PFMA-C_4. This result was originated from the low main chain mobility of PFFA-C₄ and PFClA-C₄ due to the presence of bulky α-substituents. The effect of molecular motion on water repellency was clarified by the results of temperature dependence studies of dynamic contact angle, LFM, and surface chemical composition measured by XPS.     

Conditional transformation of immunoglobulin mutation pattern from gene conversion into point mutation by controlling XRCC3 expression in the DT40 B cell line

A hypermutating B cell line DT40 is useful for screening antibodies and improving affinity of the selected antibodies in vitro. To perform affinity maturation efficiently, we generated an engineered DT40 line whose immunoglobulin mutation pattern can be transformed from gene conversion into point mutation by conditional suppression of XRCC3 expression.     

In situ time-resolved X-ray diffraction of tobermorite formation in autoclaved aerated concrete: Influence of silica source reactivity and Al addition

The hydrothermal formation of tobermorite during the processing of autoclaved aerated concrete was investigated by in situ X-ray diffraction (XRD) analysis. High-energy X-rays from a synchrotron radiation source in combination with a newly developed autoclave cell and a photon-counting pixel array detector were used.To investigate the effects of the silica source, reactive quartz from chert and less-reactive quartz from quartz sand were used as starting materials. The effect of Al addition on tobermorite formation was also studied. In all cases, C-S-H, hydroxylellestadite and katoite were clearly observed as intermediates.Acceleration of tobermorite formation by Al addition was clearly observed. However, Al addition did not affect the dissolution rate of quartz. Two pathways, via C-S-H and katoite, were also observed in the Al-containing system. These results suggest that the structure of initially formed C-S-H is important for the subsequent tobermorite formation reactions.     

Effects of cyclic vertical loading on bearing and pullout capacities of piles with continuous helix wing

Laboratory and field tests were conducted to investigate the bearing and pullout capacities of steel piles with a continuous helix wing during cyclic loading. Both continuous helix and straight-sided piles were subjected to monotonic compressive, monotonic tensile, and cyclic reversal loading in the laboratory, while only the continuous helix pile was tested in the field. Both the laboratory and the field tests showed that the bearing and pullout capacities of the continuous helix pile under cyclic reversal loading decreased to approximately 60–80% of those of the pile under monotonic loading, with a larger reduction seen in the laboratory tests. The decrease in resistance was mainly due to the reduction in shaft friction, which was likely to be the result of soil disturbance and loosening around the pile with cyclic loading. The laboratory tests also showed that the tip resistance of the straight-sided pile under cyclic reversal loading was reduced, similarly due to the loosening of the soil, particularly underneath the pile tip. The tip resistance of the continuous helix pile, in contrast, did not degrade with cyclic loading, owing to the presence of the wing immediately above the pile tip that inhibited the loosening of the soil. These findings were supported by similar field test observations.