Personal exposure to PM2.5-bound heavy metals associated with cardiopulmonary function in general population

Environmental Science and Pollution Research - To better understand the cardiopulmonary alterations associated with personal exposed PM2.5-bound heavy meals, we conducted a cross-sectional study in...     

Research progress and hot spots of hydrothermal liquefaction for bio-oil production based on bibliometric analysis

Environmental Science and Pollution Research - Hydrothermal liquefaction (HTL) of biomass used HTL reaction under high temperature and pressure to produce bio-oil. This technology is considered as...     

Conversion of waste plastics into value-added carbon materials

Plastic pollution is a major environmental issue worldwide, calling for advanced methods to recycle waste plastics in the context of the circular economy. Here we review methods and strategies to convert waste plastics into value-added carbon materials, with focus on sources, properties, pretreatment of waste plastics, and on preparation of carbon materials. Pretreatment techniques include mechanical crushing, plastic stabilization and electrospinning. Carbon materials such as carbon nanotubes, graphene, carbon nanosheets, carbon spheres and porous carbon are prepared by oxygen-limited carbonization, catalytic carbonization, the template-based method, and pressure carbonization. We emphasize the conversion of polyethene terephthalate, polyethylene, polypropylene, polystyrene, halogenated plastics, polyurethane and mixed plastics.

     

基于变权灰色云模型的江苏省水环境系统脆弱性评价

水环境系统脆弱性是水资源利用与生态环境研究的热点问题，通过研究水环境系统的内在机理，综合考虑影响水环境系统脆弱性的资源、环境、经济、社会等因素，借助驱动力-压力-状态-影响-响应-管理（DPSIRM）框架构建水环境系统脆弱性评价指标体系。在此基础上，构建基于变权灰色云模型的评价方法，对2004~2014年江苏省水环境系统脆弱性进行评价。结果表明：2004~2014年水环境系统脆弱性指数由47.056提高到63.210，脆弱性等级由“重度脆弱”演化为“中度脆弱”，并长期维持在“中度脆弱的”等级，2014年出现了向“轻度脆弱”状态转变的趋势。分析各个子系统对水环境系统脆弱性影响程度可知，影响子系统和响应子系统对江苏省水环境脆弱性系统的影响程度逐年增加；而压力子系统和管理子系统对水环境系统脆弱性的影响程度逐年下降；其它子系统对水环境系统脆弱性的影响维持在一定水平小幅度波动。     

Heat dissipation characteristic in the intake grille and radiator of a fuel cell vehicle

ABSTRACT

In this study, a three-dimension (3D) computational model was proposed to investigate the flow and heat transfer characteristics of the intake grilles of two different fuel cell vehicles. The models of the intake grilles were constructed according to the actual sizes of two vehicles, namely, Roewe 950 and Toyota Mirai, considering the heat dissipation unit to simplify the heat transfer model of the vehicle. The results showed that relative to Roewe 950, Mirai intake air flow rate was approximately 10% higher, the heat transfer capacity was approximately 7% higher, and the intake grille area was larger. The coolant outlet temperature of Mirai was lower than that of Roewe 950, which was beneficial for the long term and stable operation of a fuel cell. This comparative study provided guidance for the intake grille and radiator design of fuel cell vehicles. The only difference between fuel cell vehicles on the market and conventional vehicles was that in the former, the internal combustion engine was replaced with a fuel cell stack, which had insufficient heat transfer capacity because of the reducing temperature difference. Increasing the intake grille area and the heat exchange capacity of the radiator were the key issues for the development of fuel cell vehicles. In this study, an optimal window opening angle of the radiator fin of 23° provided a maximal heat transfer coefficient.     

Health risk assessment of heavy metals in Cyprinus carpio (Cyprinidae) from the upper Mekong River

The purposes of this research are to quantify the concentration of heavy metals (Zn, Cu, As, Pb, Cd, and Hg) in the water and fish tissues of common carp (Cyprinus carpio) in the upper Mekong River and to thereby elucidate the potential dietary health risks from fish consumption of local residents. Surface water and fish tissues (gill, muscle, liver, and intestine) from four representative sample areas (influence by a cascade of four dams) along the river were analyzed for heavy metal concentrations. Results revealed that the levels of heavy metals in fish were tissue-dependent. The highest Cu and As levels were found in the liver; the highest Zn and Pb levels occurred in the intestine, and the highest Hg level was found in the muscle. The total target hazard quotient (THQ) value for residents is > 1 for long-term fish consumption, and local residents are, therefore, exposed to a significant health risk. Results from the current study provide an overall understanding of the spatial and tissue distribution of heavy metals in water and fish body along the upper Mekong River under the influence of cascade dams and highlight the potential health risk of As for the local residents of long-term fish consumption.

     

Correction to: Preparation of GO/MIL-101(Fe,cu) composite and its adsorption mechanisms for phosphate in aqueous solution

Environmental Science and Pollution Research - A Correction to this paper has been published: https://doi.org/10.1007/s11356-021-15526-6     

Growth of Zostera japonica in different sediment habitats of the Yellow River estuary in China

Environmental Science and Pollution Research - The estuarine delta of the Yellow River is a region of strong land-ocean-human interactions that undergoes a unique evolutionary process. The delta is...     

Phosphorus adsorption by functionalized biochar: a review

Environmental Chemistry Letters - Phosphorus is essential element for agricultural production, yet phosphorus ore resources are non-renewable and become depleted. Moreover, phosphate release from...