Dioxin-like compounds in pine needles around Tokyo Bay, Japan in 1999

Pine needle samples collected at ten spatially distant sites around Tokyo Bay in 1999 indicated a widespread lower troposphere pollution with ultra-trace dioxin-like compounds such as chlorodibenzo-p-dioxins (PCDDs), -furans (PCDFs), non-ortho- and mono-ortho-chlorobiphenyls (pPCBs), and -naphthalenes (PCNs). Elevated concentration of planar PCBs and the total PCNs were found at the sites which are located innermost to the Bay, suggesting the regional importance of the evaporative nature of the source of pollution by those compounds over this vast area. The concentrations and profiles for PCDDs and PCDFs remained largely uniform. An exception was the site near the town of Tateyama in the Chiba Prefecture, which is the southernmost but also relatively separate from the inner Bay. The site near Tateyama showed somehow background contamination with all compound groups and highly different profiles of PCNs. The principal component analysis (PCA) of the data matrix has revealed that around the Tokyo Bay, apart from the evaporative emission sources for PCNs and PCBs, combustion related processes also play an important role as sources of the ambient air contamination not only with PCDDs/Fs but also with chloronaphthalenes and planar chlorobiphenyls.     

Industrial and urban symbiosis in Japan: Analysis of the Eco-Town program 1997–2006

Japan's Eco-Town Program spearheaded in Japan the integration of Industrial Symbiosis and Urban Symbiosis, seeking to maximise the economic and environmental benefit from close geographic proximity of industrial and urban areas, through the use of previously discarded commercial, municipal and industrial waste materials in industrial applications. The program established 26 Eco-Towns around Japan. Approximately 1.65 billion USD was invested in 61 innovative recycling projects, with an average government subsidy of 36%. In addition at least 107 other recycling facilities have been constructed without government subsidy. 14 Eco-Towns primarily contributed to improving industry's productivity, whilst 10 Eco-Towns primarily contributed to improving environmental amenity. In 16 Eco-Towns the private sector was the most important actor supporting local government in the realisation of the Eco-Town, whilst in 9 Eco-Towns this was civil society. The availability of investment subsidies, the coming into force of ambitious recycling legislation with quantified, product-specific targets, access to the significant technological resources of the private sector, and widespread recognition of the urgency to act on environmental issues, all contributed to the success of the Eco-Town Program.     

Potential bioremediation of mercury-contaminated substrate using filamentous fungi isolated from forest soil

The use of filamentous fungi in bioremediation of heavy metal contamination has been developed recently. This research aims to observe the capability of filamentous fungi isolated from forest soil for bioremediation of mercury contamination in a substrate. Six fungal strains were selected based on their capability to grow in 25 mg/L Hg2+-contaminated potato dextrose agar plates. Fungal strain KRP1 showed the highest ratio of growth diameter, 0.831, thus was chosen for further observation.Identification based on colony and cell morphology carried out by 18S rRNA analysis gave a 98%match to Aspergillus flavus strain KRP1. The fungal characteristics in mercury(Ⅱ) contamination such as range of optimum pH, optimum temperature and tolerance level were 5.5–7 and 25–35℃ and 100 mg/L respectively. The concentration of mercury in the media affected fungal growth during lag phases. The capability of the fungal strain to remove the mercury(Ⅱ) contaminant was evaluated in 100 mL sterile 10 mg/L Hg2+-contaminated potato dextrose broth media in 250 mL Erlenmeyer flasks inoculated with 108spore/mL fungal spore suspension and incubation at 30℃ for 7 days. The mercury(Ⅱ) utilization was observed for flasks shaken in a 130 r/min orbital shaker(shaken) and nonshaken flasks(static) treatments. Flasks containing contaminated media with no fungal spores were also provided as control. All treatments were done in triplicate. The strain was able to remove 97.50%and 98.73% mercury from shaken and static systems respectively. A. flavus strain KRP1 seems to have potential use in bioremediation of aqueous substrates containing mercury(Ⅱ) through a biosorption mechanism.     

Characterization of trace constituents in landfill gas and a comparison of sites in Asia

Because landfill gas (LFG) contains an abundance of methane, the utilization of LFG as a renewable energy source is becoming popular in many countries. LFG, however, contains various trace constituents, some of which may pose problems during utilization. For example, siloxanes and halogenated volatile organic compounds (VOCs) can cause difficulties when present in the fuel of gas engines. In addition, many VOCs and mercury have harmful effects on human health, especially on the health of workers at landfill sites and people living near the landfills. Energy recovery from LFG is expected to make great progress in the near future, particularly in Asia, but we found little information on the trace constituents of LFG in this region. Therefore, we sought to characterize the trace components in LFG generated in two landfill sites in China and one site in Japan, to determine the typical concentrations of these trace components in LFG, and to compare their concentrations among landfill sites in Asia. We concluded that the trace components in LFG at the sites studied were mainly siloxanes generated from sewage sludge and harmful benzene, toluene, ethylbenzene, and xylene compounds from petroleum products.     

Potential application of high pressure carbon dioxide in treated wastewater and water disinfection: Recent overview and further trends

Recently emerging disadvantages in conventional disinfection have heightened the need for finding a new solution. Developments in the use of high pressure carbon dioxide for food preservation and sterilization have led to a renewed interest in its applicability in wastewater treatment and water disinfection. Pressurized CO₂ is one of the most investigated methods of antibacterial treatment and has been used extensively for decades to inhibit pathogens in dried food and liquid products. This study reviews the literature concerning the utility of CO₂ as a disinfecting agent, and the pathogen inactivation mechanism of CO₂ treatment is evaluated based on all available research. In this paper, it will be argued that the successful application and high effectiveness of CO₂ treatment in liquid foods open a potential opportunity for its use in wastewater treatment and water disinfection. The findings from models with different operating conditions (pressure, temperature, microorganism, water content, media …) suggest that most microorganisms are successfully inhibited under CO₂ treatment. It will also be shown that the bacterial deaths under CO₂ treatment can be explained by many different mechanisms. Moreover, the findings in this study can help to address the recently emerging problems in water disinfection, such as disinfection by-products (resulting from chlorination or ozone treatment).     

Adsorption and desorption characteristics of several herbicides on sediment

The objective of this study was to clarify the adsorption and desorption characteristics of several herbicides in sediment. Five herbicides, esprocarb, thiobencarb, dimethametryn, pretilachlor, and simetryn were examined in this study. The adsorption ratio on the sediment increased in the following order: pretilachlor < dimethametryn < simetryn < thiobencarb < esprocarb. On the other hand, the adsorption ratio on the sediment without organic matter increased in the following order: thiobencarb < esprocarb < pretilachlor < dimethametryn < simetryn. Furthermore, the amounts of simetryn, dimethametryn, and pretilachlor adsorbed on the sediment without organic matter increased, while those of esprocarb and thiobencarb decreased in comparison to the original sediment. These results strongly suggested that the mineral surface in the sediment was very important as the adsorption site for the herbicide, especially in the case of simetryn, dimethametryn, and pretilachlor. All the adsorption and desorption data fitted well with the Freundlich equation. The hysteresis in the adsorption-desorption phenomena in the sediment was observed for all the herbicides, and it was affected by the organic matter in sediment, especially in the case of dimethametryn and pretilachlor.     

A quantitative water resource planning and management model for an industrial park level

This paper introduces an integrated water management model at the industrial park level. It suggests four approaches to water management: first, direct water reuse among users; second, water reuse among users by blending with freshwater; third, water reuse between users and a wastewater treatment plant; and fourth, groundwater recharge by reclaimed wastewater or other feasible applications in order to optimize the overall water efficiency. The model results in a comprehensive management methodology for optimizing water resources within an industrial park, seeking potential water reuse among industries, and incorporating the size and cost of reclaimed wastewater delivery systems. A case study is employed to test the model’s feasibility. An economic analysis of the optimized water use network is also carried out, showing the potential water and cost savings.     

Modelling of stem biomass accumulation in Pinus densiflora seedlings exposed to aqueous-phase OH radicals generating mist

The present study aimed to evaluate the short-term biomass accumulation of forest trees exposed to wet acidic depositions. A hierarchical Bayesian model of tree growth was developed based on the data of a short-term experiment in which 2-year-old Japanese red pine (Pinus densiflora Sieb. et Zucc.) seedlings were exposed to aqueous phase OH radicals generated by an iron-oxalate-H₂O₂ mist (a pseudo-polluted dew) over two growing periods. We conducted a statistical comparison of tree growth between the control and pollution treatment groups by using the growth model incorporated the random effects due to the unknown characteristics of each seedling. The variability among seedlings is expressed in this model by the posterior probabilistic distributions of unobserved dry weight of a stem cohort before exposure treatment. The analysis of the effects of pollution treatment on the stem growth revealed that this treatment decreases the biomass allocation in the current year stems. However, the effects on the relative growth rate of pre-existing stems were unclear. Based on these results, we can speculate that in a polluted environment, the short-term growth of the young stems in the seedlings inhibited by pollution treatment, thereby resulting in the slowdown of long-term biomass accumulation. This can explain the patterns observed in the declining Japanese red pine forests that are subjected to OH-generating dews in the polluted area of western Japan.     

Effect of limited aeration on the anaerobic treatment of evaporator condensate from a sulfite pulp mill

Serious inhibition was found in the regular up-flow anaerobic sludge blanket (UASB) reactor in treating the evaporator condensate from a sulfite pulp mill, which contained high strength sulfur compounds. After applying the direct limited aeration in the UASB, the inhibition was alleviated gradually and the activity of the microorganisms was recovered. The COD removal rate increased from 40% to 80% at the organic loading rate of 8kgCODm(-3)d(-1) and a hydraulic retention time of 12h. Limited aeration caused no oxygen inhibition to the anaerobic microorganisms but instigated sulfide oxidization and H(2)S removal, which was beneficial to the methanogens. The experiment confirmed the feasibility of applying limited aeration in the anaerobic reactor to alleviate the sulfide inhibition. It also proved that the anaerobic system was actually aerotolerant. SEM observation showed that the predominant microorganisms partly changed from rod-shaped methanogens to cocci after the UASB reactor was aerated.     

Gaseous mercury oxidation behavior in homogeneous reaction with chlorine compounds

Homogeneous oxidation reactions of gaseous elemental mercury were experimentally tested to study the behavior of mercury compounds that contribute to toxic emissions in combustion flue gas. Chemical equilibrium calculations and reaction kinetics analysis were also carried out to help explain the experimental results. In particular, the chemical forms of oxidized mercury and their reaction paths were verified in detail. Among the experimental results, molecular chlorine was confirmed to have a higher oxidizing ability toward elemental mercury than hydrogen chloride does. From the chemical equilibrium calculation, the final product of mercury compounds oxidized by chlorine was confirmed to be mercury chloride (HgCl₂). Numerical analyses of reaction kinetics were mostly consistent with the experimental results and the chemical equilibrium calculations. The ratio of mercury oxidization by chlorine increases with temperature from 473 K to 873 K, although it decreases at temperatures higher than 1000 K. Sensitivity analysis revealed the dominant reaction path of the mercury oxidation by chlorine. First, elemental mercury reacts with Cl radicals to form HgCl. Then, the HgCl reacts with Cl₂ to produce HgCl₂.