Influence of polymethyl acrylate additive on the formation of particulate matter and NOX emission of a biodiesel–diesel-fueled engine

Environmental Science and Pollution Research - The aim of this study is to investigate the effect of the polymethyl acrylate (PMA) additive on the formation of particulate matter (PM) and nitrogen...     

Using penalty functions to evaluate aggregation models for environmental indices

The purpose of indices is to summarize a large volume of information into a single number that is easy to understand and interpret. Environmental indices provide a composite picture of an environmental condition derived from a series of observed measurements and parameters. They are used as communication tools by regulatory agencies to characterize the state of a specific environmental system (air, water, and sediments) and to study the impact of regulatory policies on various environmental management practices. In the development of environmental indices, a few issues and problems have been encountered arising as a result of the abstraction of information and data. These problems are referred to as characteristic properties that include ambiguity, eclipsing, compensation and rigidity. These characteristic properties have long been identified and interpreted in Boolean (e.g., Yes/No) or qualitative (e.g., low, medium, high) terms. In this paper, we propose a new approach to describe the above stated characteristic properties on a continuous scale to evaluate and compare the behavior of various aggregation models. Our approach is based on developing penalty functions for each characteristic property. A water quality index example by Swamee and Tyagi (2000) is used to explain our approach. A detailed case study for a developing microbial risk index is also provided to show how the proposed approach can be extended to complex hierarchical systems. Results show that it is possible to improve aggregation models for index development. Future research directions to improve index development are also discussed.     

Enhancement of biomethane production from cattle manure with codigestion of dilute acid pretreated lignocellulosic biomass

It is well known that dilute sulfuric acid pretreatment of the lignicellulosisc biomass is an effective approach used for the production of the ethanol. However, there are less studies on the biogas production from the pretreated lignocellulosics and hardly data available on the codigestion of cattle manure with the pretreated lignocellulosisc material. The aim of this study was to evaluate biomethane production potential of codigestion of cattle manure with dilute acid pretreated lignocellulosic biomass. Sugarcane bagasse and rice husk was pretreated with dilute sulfuric acid or phosphoric acid at 121°C for 20 minutes and subsequently subjected to anaerobic digestion alone or codigested with cattle manure.

The results showed that codigestion of 1% phosphoric acid pretreated rice husk with cattle manure led to the highest methane production of 115 Nmlg^?1VS while monodigestion of cattle manure and phosphoric acid pretreated rice husk produced 98 and 87 Nmlg^?1VS, respectively. An inhibition was observed in anaerobic digestion of sulfuric acid pretreated rice husk and sugarcane bagasse during monodigestion and codigestion with cattle manure.

The study concludes that dilute phosphoric acid pretreated lignocellulosics like sugarcane bagasse and rice husk can be used as a cosubstrate with cattle manure in anaerobic digestion for enhanced methane production. Dilute sulfuric acid pretreatment, which is effective method for the bioethanol production, causes inhibition during anaerobic digestion of the pretreated lignocellulosics.     

Spindle speed variation and adaptive force regulation to suppress regenerative chatter in the turning process

Chatter suppression in machining processes results in more material removal rate, high precision and surface quality. In this paper, two control strategies are developed to suppress chatter vibration in the turning process including a worn tool. In the first stage, a sinusoidal spindle speed variation around the mean speed is modulated to disturb the regenerative mechanism. The optimal amplitudes of the speed modulations are found based on a genetic algorithm such that the input energy to the turning process is minimized. In the second stage, to improve the response of the system which is associated with small ripples under the steady state condition, an adaptive controller is designed. In this stage, the provided external force (e.g., by a piezo-actuator) is the input variable. Results are provided for each control strategy. It is shown that if both control approaches are applied simultaneously, chatter vibration is suppressed in less time without any ripples at the steady state condition.     

Comparative corrosion characteristics of automotive materials in Jatropha biodiesel

This study investigated the corrosion characteristics of widely used automotive materials: copper (Cu), aluminum (Al) and stainless steel (SS) in Jatropha biodiesel. The corrosion rate of the materials was measured by the weight loss and changes in the surface morphology using immersion test in biodiesel. Before and after the immersion test, fuel samples were characterized by the change in chemical composition, viscosity, density, and water content. Experimental results revealed that Cu had the highest corrosion rate, while SS had the lowest. The main fatty acids observed in the tested biodiesel were oleic (44.6 wt %), linoelic (31.9 wt %), Palmitic (14.6 wt %), and Stearic (7.6 wt %). Apart from linoelic acid, the compositions of all other acids were increased after the immersion test of 1600 h. Also, the viscosity, density, and water content of the fuel samples were increased after the immersion test. However, these properties were within the maximum standard limit except water content.     

Recyclable Clay-Supported Heteropolyacid Catalysts for Complete Glycolysis and Aminolysis of Post-consumer PET Beverage Bottles

Journal of Polymers and the Environment - In this investigation, the use of phosphotungstic acid (PWA) and phosphomolybdic acid (PMA) as well as Zn2+ containing kaolin and bentonite explored for...     

Non-timber forest product dependence among the <Emphasis Type="Italic">Jah Hut</Emphasis> subgroup of Peninsular Malaysia’s Orang Asli

Non-timber forest products (NTFP) represent key sources of cash and subsistence income for millions of rural and indigenous peoples living in tropical developing countries throughout the world. The current study investigates the use and significance of NTFP within a sample of Peninsular Malaysia’s Orang Asli (indigenous people). Data collected via household surveys across three sampling phases reveals that more than 75% of the population is actively engaged in NTFP collection. Household responses indicate diversity in both the types and uses of products collected. NTFP collection participation, frequency of collection, and collection reliance are found to be significantly negatively related to village proximity to the market, as well as to income level relative to the Malaysian poverty line. When collection variables are examined by different product categories, relationships with market access and income group are variable. Implications for different approaches to forest conservation and rural development are discussed.     

Sustainable application of cochineal-based anthraquinone dye for the coloration of bio-mordanted silk fabric

Natural colors particularly animal-based colorants are employed in the field of cosmetics, food, and flavors and also gaining popularity in textiles, due to their soothing nature. In this study, the microwave-assisted extraction of colorant from cochineal insects for dyeing of bio-mordanted silk has been carried out. Acidic, methanolic, and acidified methanol solubilized media were used to extract the natural colorant from cochineal under microwave irradiation for 1–6 min. Bio-mordants have been employed at optimized conditions to make the process greener and sustainable. It is found that acid solubilized extract of pH 4, employed at 55 °C for 55 min containing 5 g/100 mL of Glauber’s salt as exhausting agent has given high color strength onto microwave-treated silk fabric. Suggested ISO standards for colorfastness have revealed that bio-mordants have given excellent color depth and excellent rating of fastness properties, compared with chemical mordants used. It is found that microwave treatment has not only improved the dyeing behavior of colorant extracted from cochineal in acid solubilized medium but also enhanced the color characteristics onto bio-mordanted silk fabric.     

Organohalogen compounds in blubber of Indo-Pacific bottlenose dolphin (Tursiops aduncus) and spinner dolphin (Stenella longirostris) from Zanzibar, Tanzania

Blubber samples of Indo-Pacific bottlenose (Tursiops aduncus) and spinner (Stenella longirostris) dolphins from Zanzibar, East Africa, were analyzed for a wide range of organohalogen compounds. Methoxylated polybrominated diphenyl ethers (MeO-BDEs), presumably biogenic, were found at higher concentrations than anthropogenic organochlorine pesticides (OCPs). Only traces of industrial pollutants, such as polychlorinated biphenyls, were detected. The OCP levels found off Zanzibar were lower than those reported from other regions while MeO-BDE levels were higher. The relative composition of the OCPs indicated recent use of lindane (γ-hexachlorocyclohexane) and aged residues of DDT and technical HCH. Placental transfer was estimated to 2.5% and 0.5% of the total burden of OCPs and MeO-BDEs, respectively. Overall transfer from mother to calf in Indo-Pacific bottlenose dolphins was estimated to 72% and 85% for the OCPs and MeO-BDEs burdens, respectively. Health effects of MeO-BDEs are not known, but structural similarities with well-known environmental toxins are cause for concern.     

Developing a new fuzzy inference system for pipeline risk assessment

The problem of less and/or even lack of information and uncertainty in modeling and decision making plays a key role in many engineering problems; so that, it results in designers and engineers could not reach to sure solutions for the problems under consideration. In this paper, an application of the fuzzy logic for modeling the uncertainty involved in the problem of pipeline risk assessment is developed. For achieving the aim, relative risk score (RRS) methodology, one of the most popular techniques in pipeline risk assessment, is integrated with fuzzy logic. The proposed model is performed on fuzzy logic toolbox of MATLAB^® using Mamdani algorithm based on experts' knowledge. A typical case study is implemented and a comparison between the classical risk assessment approach and the proposed model is made. The results demonstrate that the proposed model provides more accurate, precise, sure results; so that, it can be taken into account as an intelligent risk assessment tool in different engineering problems.