Novel Hybrid Integration Approach of Bagging-Based Fisher’s Linear Discriminant Function for Groundwater Potential Analysis

Natural Resources Research - Groundwater is a vital water source in the rural and urban areas of developing and developed nations. In this study, a novel hybrid integration approach of...     

Comparison of Vegetation Indices from Two Ground Based Sensors

The best and commonly used ground-based sensor to monitor crop growth, ASD FieldSpecPro Spectroradiometer (Analytical Spectral Devices, Boulder, CO, USA) is a passive sensor, which can be used under adequate light condition. However, now-a-days active sensors such as GreenSeeker? (GS) handheld crop response (Trimble Agriculture division, USA) are used for monitoring crop growth and are flexible in terms of timeliness and illumination conditions besides being cheaper than the ASD. Before its wide use, the suitability and accuracy of GS should be assessed by comparing the NDVI measured by this instrument with that by ASD, under diverse wheat growing conditions of India. Keeping this in view, the present experiment was undertaken with the following objectives: (1) to find out the temporal variation of NDVI measured both by ASD and GS treatments, (2) to find out relationship between the NDVI measured through ASD and GS and, (3) to evaluate the suitability of GS for NDVI measurements. It was observed that the numerical value of NDVI as measured by GS was always significantly (P < 0.05) lower than that measured by ASD for all the experiments under study. The NDVI-ASD and NDVI-GS were significantly positively correlated (P < 0.01) with the correlation coefficients being +0.94, +0.88 and +0.87 for irrigation and nitrogen experiment, irrigation and cultivars experiment, and tillage, residue and nitrogen experiments, respectively. Further, the regression equation developed between the NDVI-ASD and NDVI-GS: [NDVI-GS = 1.070 × (NDVI-ASD ? 0.292] can be successfully used to compute the NDVI of ASD from that computed by GS.     

Land use change modeling and the effect of compact city paradigms: integration of GIS-based cellular automata and weights-of-evidence techniques

In recent decades, attaining urban sustainability is the primary goal for urban planners and decision makers. Among various aspects of urban sustainability, environmental protection such as agricultural and forest conservations is very important in tropical countries like Malaysia. In this regard, compact urban development due to high density, rural development containment is known as the most sustainable urban forms. This paper attempts to propose an integrated modeling approach to predict the future land use changes by considering city compactness paradigms. First, the cellular automata (CA) were applied for calculating land use conversion. Next, weights-of-evidence (WoE) which is based on Bayes theory was utilized to calibrate CA model and to support the transitional rule assessment. Several urban-related parameters as well as compact city indicators were utilized to estimate the future land use maps. The results showed how compact development parameters and site characteristics can be combined using the WoE model to predict the probability of land use changes. The modeling approach supports the essential logic of probabilistic methods and indicates that spatial autocorrelation of various land use types and accessibility is the main drivers of urban land use changes.     

Spatio-temporal variations of respirable particles at residential areas located in the vicinity of opencast coal projects,India: a case study

The objective of the study is to investigate spatio-temporal variations of PM₁₀, PM_2.5, and PM₁ concentrations at seven residential sites, located in the vicinity of opencast coal projects, Basundhara Garjanbahal Area (BGA), India. Meteorological parameters such as wind speed, wind direction, relative humidity, and temperature were collected simultaneously with PM concentrations. Mean concentrations of PM₁₀ in the range 215 ± 169–526 ± 412 μg m^?3, PM_2.5 in the range of 91 ± 79–297 ± 107 μg m^?3, PM₁ in the range of 68 ± 60–247 ± 84 μg m^?3 were obtained. Coarse fractions (PM_2.5–10) varied from 27 to 58% whereas fine fractions (PM_1–2.5 and PM₁) varied in the range of 51–73%. PM_2.5 concentration was 41–74% of PM₁₀ concentration, PM₁ concentration was 31–62% of PM₁₀ concentration, and PM₁ concentration was 73–83% of PM_2.5 concentration. Role of meteorology on PM concentrations was assessed using correlation analysis. Linear relationships were established among PM concentrations using least square regression analysis. With the aid of principal component analysis, two components were drawn out of eight variables, which represent more than 75% of variance. The results indicated that major sources of air pollutants (PM₁₀, PM_2.5, PM₁, CO, CO₂) at the residential sites are road dust raised by vehicular movement, spillage of coal generated during transportation, spontaneous combustion of coal, and biomass burning in village area.     

Stability and sensitivity analysis of Himalayan road cut debris slopes: an investigation along NH-58, India

The complex geological environment due to active tectonics and varied lithology with multiple phases of deformation and metamorphism led to a rugged topography and large destabilization of slopes in the Himalayan region. However, the ever-rising activities due to various ongoing developmental and urbanization processes in the region are contributing to instability of slopes. The significant number of causalities and massive economic loss is deliberately endangering Himalayan ecosystem due to landslide-related phenomena. Transportation corridors within Himalayan terrain experience frequent landslides, particularly the sections manifested by debris slopes. From several decades, the national highway-58, in Uttarakhand, Himalayas, has been endangered due to diverse and incessant slope failures. The present investigation demonstrates the stability appraisal along the strategic transportation corridor. These studies incorporate the various issues and causes pertaining to debris slides from Rishikesh to Devprayag, Uttarakhand. The numerical simulation assessment was undertaken by deterministic and sensitivity analyses by conventional limit equilibrium methods which is being augmented by much advanced and robust finite element tool. Factor of safety for each slope was determined, and correspondingly, best efficient slope stabilization remedies were proposed to enhance the stability of slopes. It is recommended that such strategic slope stability assessment should be performed within different vulnerable sections of the Himalayas and likewise regions for fruitful and sustainable step toward disaster mitigation.     

Spatial landslide susceptibility assessment using machine learning techniques assisted by additional data created with generative adversarial networks

In recent years,landslide susceptibility mapping has substantially improved with advances in machine learning.However,there are still challenges remain in landslide mapping due to the availability of limited inventory data.In this paper,a novel method that improves the performance of machine learning techniques is presented.The proposed method creates synthetic inventory data using Generative Adversarial Networks(GANs)for improving the prediction of landslides.In this research,landslide inventory data of 156 landslide locations were identified in Cameron Highlands,Malaysia,taken from previous projects the authors worked on.Elevation,slope,aspect,plan curvature,profile curvature,total curvature,lithology,land use and land cover(LULC),distance to the road,distance to the river,stream power index(SPI),sediment transport index(STI),terrain roughness index(TRI),topographic wetness index(TWI)and vegetation density are geo-environmental factors considered in this study based on suggestions from previous works on Cameron Highlands.To show the capability of GANs in improving landslide prediction models,this study tests the proposed GAN model with benchmark models namely Artificial Neural Network(ANN),Support Vector Machine(SVM),Decision Trees(DT),Random Forest(RF)and Bagging ensemble models with ANN and SVM models.These models were validated using the area under the receiver operating characteristic curve(AUROC).The DT,RF,SVM,ANN and Bagging ensemble could achieve the AUROC values of(0.90,0.94,0.86,0.69 and 0.82)for the training;and the AUROC of(0.76,0.81,0.85,0.72 and 0.75)for the test,subsequently.When using additional samples,the same models achieved the AUROC values of(0.92,0.94,0.88,0.75 and 0.84)for the training and(0.78,0.82,0.82,0.78 and 0.80)for the test,respectively.Using the additional samples improved the test accuracy of all the models except SVM.As a result,in data-scarce environments,this research showed that utilizing GANs to generate supplementary samples is promising because it can improve the predictive capability of common landslide prediction models.     

APG:A novel python-based ArcGIS toolbox to generate absence-datasets for geospatial studies

One important step in binary modeling of environmental problems is the generation of absence-datasets that are traditionally generated by random sampling and can undermine the quality of outputs.To solve this problem,this study develops the Absence Point Generation(APG)toolbox which is a Python-based ArcGIS toolbox for automated construction of absence-datasets for geospatial studies.The APG employs a frequency ratio analysis of four commonly used and important driving factors such as altitude,slope degree,topographic wetness index,and distance from rivers,and considers the presence locations buffer and density layers to define the low potential or susceptibility zones where absence-datasets are gener-ated.To test the APG toolbox,we applied two benchmark algorithms of random forest(RF)and boosted regression trees(BRT)in a case study to investigate groundwater potential using three absence datasets i.e.,the APG,random,and selection of absence samples(SAS)toolbox.The BRT-APG and RF-APG had the area under receiver operating curve(AUC)values of 0.947 and 0.942,while BRT and RF had weaker per-formances with the SAS and Random datasets.This effect resulted in AUC improvements for BRT and RF by 7.2,and 9.7％from the Random dataset,and AUC improvements for BRT and RF by 6.1,and 5.4％from the SAS dataset,respectively.The APG also impacted the importance of the input factors and the pattern of the groundwater potential maps,which proves the importance of absence points in environmental bin-ary issues.The proposed APG toolbox could be easily applied in other environmental hazards such as landslides,floods,and gully erosion,and land subsidence.     

Approaches for delineating landslide hazard areas using different training sites in an advanced artificial neural network model

The current paper presents landslide hazard analysis around the Cameron area, Malaysia, using advanced artificial neural networks with the help of Geographic Information System (GIS) and remote sensing techniques. Landslide locations were determined in the study area by interpretation of aerial photographs and from field investigations. Topographical and geological data as well as satellite images were collected, processed, and constructed into a spatial database using GIS and image processing. Ten factors were selected for landslide hazard including: 1) factors related to topography as slope, aspect, and curvature; 2) factors related to geology as lithology and distance from lineament; 3) factors related to drainage as distance from drainage; and 4) factors extracted from TM satellite images as land cover and the vegetation index value. An advanced artificial neural network model has been used to analyze these factors in order to establish the landslide hazard map. The back-propagation training method has been used for the selection of the five different random training sites in order to calculate the factor’s weight and then the landslide hazard indices were computed for each of the five hazard maps. Finally, the landslide hazard maps (five cases) were prepared using GIS tools. Results of the landslides hazard maps have been verified using landslide test locations that were not used during the training phase of the neural network. Our findings of verification results show an accuracy of 69%, 75%, 70%, 83% and 86% for training sites 1, 2, 3, 4 and 5 respectively. GIS data was used to efficiently analyze the large volume of data, and the artificial neural network proved to be an effective tool for landslide hazard analysis. The verification results showed sufficient agreement between the presumptive hazard map and the existing data on landslide areas.