Bidirectional shaking table tests of a low-cost friction sliding system with flat-inclined surfaces

A novel low-cost friction sliding system for bidirectional excitation is developed to improve the seismic performance of reinforced concrete (RC) bridge piers. The sliding system is a spherical prototype developed by combining a central flat surface with an inclined spherical segment, characterized by stable oscillation and a large reduction in response accelerations on the flat surface. The inclined part provides a restoring force that limits the residual displacements of the system. Conventional steel and concrete are employed to construct a flat-inclined spherical surface atop an RC pier. The seismic forces are dissipated through the frictions generated during the sliding movements; hence, the seismic resilience of bridges can be ensured with a low-cost design solution. The proposed system is fabricated utilizing a mold created by a three-dimensional printer, which facilitates the use of conventional concrete to construct spherical shapes. The concrete surface is lubricated with a resin material to prevent abrasion from multiple input ground motions. To demonstrate the effectiveness of the system, bidirectional shaking table tests are conducted in the longitudinal and transverse directions of a scaled bridge model. The effect of the inclination angle and the flat surface size is investigated. The results demonstrate a large decrease in response acceleration when the system exhibits circular sliding displacement. Furthermore, the inclination angle that generates the smallest residual displacement is identified experimentally.     

Calcite U–Pb age of the Cretaceous vertebrate‐bearing Bayn Shire Formation in the Eastern Gobi Desert of Mongolia: Usefulness of caliche for age determination

To verify the usefulness of calcite U–Pb measurement for vertebrate‐bearing strata in the Eastern Gobi, Mongolia, we performed laser ablation‐inductively coupled plasma‐mass spectrometry calcite U–Pb and trace element analyses of three caliche (calcrete) of the Bayn Shire Formation. The trace element analysis demonstrates high concentration of U in the calcites. Two meaningful calcite U–Pb ages were obtained; 95.9 ± 6.0 and 89.6 ± 4.0 Ma, which are consistent with published ages from the Bayn Shire Formation. Our results demonstrate that the calcite U–Pb method can be powerful tool for age determination of vertebrate‐bearing strata in the Gobi that do not contain index fossils or beds, but do contain caliches. This would make it possible for a comparison of biostratigraphy between the Gobi and other areas yielding abundant vertebrate fossils in Asia, North America and Europe, based on chronological data.     

Multi-approach characterization of shallow-water carbonates off Minamitorishima and their depositional settings/history

Sedimentological, geochemical, and chronological analyses were carried out on 18 carbonate rock samples collected at depths of 938, 1085, and 3354 m on the western slope of Minamitorishima (Marcus Island), which is located near the western margin of the Pacific Plate. Four groups of carbonate rocks were distinguished: a mollusk-rich limestone, a coral-rich dolomite, a foraminiferal-nannofossil packstone, and a phosphatized mudstone/wackestone. The mollusk-rich limestone is characterized by the dominance of bivalves (including rudists) and gastropod shells. Strontium isotope ratios (⁸⁷Sr/⁸⁶Sr) and Mesorbitolina ex gr. texana (a large benthic foraminifer) indicate that the shallow-water carbonates were deposited during the late Aptian–early Albian (ca. 123–111 Ma). The coral-rich dolomite is characterized by abundant scleractinian corals and nongeniculate coralline algae associated with encrusting acervulinid foraminifers. The biotic composition is similar to that of the Oligocene–Pleistocene carbonates reported from other seamounts in the northwestern Pacific. Geochemical data show that the coral-rich carbonates were dolomitized at 9.5–6.8 Ma (Tortonian–Messinian) and that normal seawater was the most likely parent fluid. The foraminiferal-nannofossil packstone is a semi-consolidated foraminiferal-nannofossil ooze and was deposited during the Pleistocene (0.99–0.45 Ma). The phosphatized mudstone/wackestone is marked by the absence of macrofossils and the presence of traces of planktic foraminifers. Although its depositional age is not constrained, the Sr isotope ratios indicate that the phosphatization occurred at 33.2–28.9 Ma. After the deposition of the Cretaceous shallow-water carbonates, including the mollusk-rich limestone, Minamitorishima was drowned and its top was covered with a pelagic cap, represented by the mudstone/wackestone. The late Eocene–early Oligocene volcanism (40.2–33.2 Ma) caused episodic uplift and returned the top of Minamitorishima to a shallow-water environment. After the early Oligocene phosphatization of the pelagic cap, coral reefs flourished on the top of this island. The reef limestone was dolomitized during the Tortonian–Messinian.     

Prolonged impact of earthquake-induced landslides on sediment yield in a mountain watershed: The Tanzawa region, Japan

To determine for how long a landslide affects sediment discharge, the sediment yields of 15 check-dam basins were compared with the time series of landslide distributions in a mountain basin in the Tanzawa region, central Japan. The distribution of sediment yield was quantitatively estimated from deposition in the sediment pools of check dams. The relationship between the landslide history and sediment discharge in the Nakagawa River basin was examined for an approximately 80-year period. Two major landslide events occurred during this period: the 1923 Kanto Earthquake and the 1972 disaster caused by heavy rainfall. The resulting trend in sediment discharge of the whole basin, estimated using reservoir sedimentation in the Miho Dam at its base, was nearly constant, with high sediment discharge (2897 m³ km^− 2 yr^− 1) in the intervening quarter-century, despite the recovery of vegetation on landslide areas in this period. Comparisons of the landslide distributions resulting from the two disasters, the sediment yields of check-dam basins, and the sediment discharge of the whole basin indicate that recent sediment discharge contains landslide debris that was originated by the Kanto Earthquake that occurred over 80 years ago. Thus, to understand high sediment discharge, it is essential to investigate not only the current basin condition and recent events, but also the landslide history of the basin for at least the previous 100 years.     

Estimation of methane emission from whole waste landfill site using correlation between flux and ground temperature

A methodology to estimate a methane emission in a waste landfill site was developed. The methane flux at a waste landfill site in summer, autumn, and winter was within the following ranges: from −1.3×10⁻² to 16, from −6.4×10⁻² to 7.5, and from −1.6×10⁻³ to 1.5×10⁻² g-CH₄ m⁻² h⁻¹, respectively. In those seasons, the mean methane emission rate and coefficient of variation were 1.1 g-CH₄ m⁻² h⁻¹ ±290%, 0.57 g-CH₄ m⁻² h⁻¹ ±347%, and 5.4×10⁻² g-CH₄ m⁻² h⁻¹ ±370%, respectively. These results simultaneously showed that fluctuations of methane emission from the landfill surface were both of spatial and temporal variability. In each season, an exponential relationship was observed between the methane flux density and the ground temperature. Total methane emissions were estimated to be 5.7×10⁻², 7.1×10⁻³, and 1.7×10⁻³ g-CH₄ m⁻² h⁻¹ in the summer, autumn, and winter surveys, respectively, using a temperature surrogated-kriging method. The results of this study would improve upon the labor-intensive closed-chamber method, and could be a more practical way to estimate methane emissions from waste landfills.