A study of microearthquake seismicity and focal mechanisms within the Sea of Marmara (NW Turkey) using ocean bottom seismometers (OBSs)

We have carried out seismological observations within the Sea of Marmara (NW Turkey) in order to investigate the seismicity induced after Gölcük–İzmit (Kocaeli) earthquake (M_w 7.4) of August 17, 1999, using ocean bottom seismometers (OBSs). High-resolution hypocenters and focal mechanisms of microearthquakes have been investigated during this Marmara Sea OBS project involving deployment of 10 OBSs within the Çınarcık (eastern Marmara Sea) and Central-Tekirdağ (western Marmara Sea) basins during April–July 2000. Little was known about microearthquake activity and their source mechanisms in the Marmara Sea. We have detected numerous microearthquakes within the main basins of the Sea of Marmara along the imaged strands of the North Anatolian Fault (NAF). We obtained more than 350 well-constrained hypocenters and nine composite focal mechanisms during 70 days of observation. Microseismicity mainly occurred along the Main Marmara Fault (MMF) in the Marmara Sea. There are a few events along the Southern Shelf. Seismic activity along the Main Marmara Fault is quite high, and focal depth distribution was shallower than 20 km along the western part of this fault, and shallower than 15 km along its eastern part. From high-resolution relative relocation studies of some of the microearthquake clusters, we suggest that the western Main Marmara Fault is subvertical and the eastern Main Marmara Fault dips to south at 45°. Composite focal mechanisms show a strike-slip regime on the western Main Marmara Fault and complex faulting (strike-slip and normal faulting) on the eastern Main Marmara Fault.     

Three-body problem

In the first part of this paper [Marchal, Yoshida, Sun Yi-Sui 1985] we have analyzed three-body systems satisfying the condition rkR where k is a suitable constant, r the mutual distance of the two masses of the binary and R the distance between the center of mass of the binary and the third mass.That condition rkR puts limits on the acceleration of the third mass and these limits allow us to determine the corresponding escape velocities.In this second part we look for initial conditions under which the inequality rkR will remain forever satisfied and we develop the corresponding tests of escape and their applications.This leads to a major improvement of the knowledge of the nature of three-body motions especially in the vicinity of triple close approaches.The region of bounded motions is much smaller than was generally expected and numerical computations of particular solutions show that we approach very near to the true limit.     

Seismic study on oceanic core complexes in the Parece Vela back-arc basin

Abstract   In the present study the seismic structure of oceanic core complexes (OCC) in the Parece Vela Basin, Philippine Sea have been imaged. Together with recent work on the Atlantis Massif OCC on the Mid-Atlantic Ridge, including deep drilling, this work provides an unprecedented opportunity to advance our understanding of OCC internal structure. A continuous, strong and relatively smooth reflection that was ca 0.15 s (two way time) below the sea floor of an OCC in the Chaotic Terrain of the Parece Vela Basin was identified. This reflection, termed the D-reflector, is similar to that observed beneath Atlantis Massif. A faster P-wave velocity (>6 km/s) is observed very shallow beneath the Chaotic Terrain OCC, suggesting that the core of these OCC is dominantly gabbroic. The D-reflector might be common beneath OCC, owing to localized alteration along fractured zones within gabbro. We further observed a series of three detachment events in the Chaotic Terrain. The first and second detachments exhumed shallow basaltic crust to deeper gabbroic core, whereas the last one only exhumed shallow basaltic crust.     

The Japan Trench and its juncture with the Kuril Trench: cruise results of the Kaiko project, Leg 3

This paper presents the results of a detailed survey combining Seabeam mapping, gravity and geomagnetic measurements as well as single-channel seismic reflection observations in the Japan Trench and the juncture with the Kuril Trench during the French-Japanese Kaiko project (northern sector of the Leg 3) on the R/V “Jean Charcot”. The main data acquired during the cruise, such as the Seabeam maps, magnetic anomalies pattern, and preliminary interpretations are discussed. These new data cover an area of 18,000 km² and provide for the first time a detailed three-dimensional image of the Japan Trench. Combined with the previous results, the data indicate new structural interpretations. A comparative study of Seabeam morphology, single-channel and reprocessed multichannel records lead to the conclusion that along the northern Japan Trench there is little evidence of accretion but, instead, a tectonic erosion of the overriding plate. The tectonic pattern on the oceanic side of the trench is controlled by the creation of new normal faults parallel to the Japan Trench axis, which is a direct consequence of the downward flexure of the Pacific plate. In addition to these new faults, ancient normal faults trending parallel to the N65° oceanic magnetic anomalies and oblique to the Japan trench axis are reactivated, so that two directions of normal faulting are observed seaward of the Japan Trench. Only one direction of faulting is observed seaward of the Kuril Trench because of the parallelism between the trench axis and the magnetic anomalies. The convergent front of the Kuril Trench is offset left-laterally by 20 km relative to those of the Japan Trench. This transform fault and the lower slope of the southernmost Kuril Trench are represented by very steep scarps more than 2 km high. Slightly south of the juncture, the Erimo Seamount riding on the Pacific plate, is now entering the subduction zone. It has been preceded by at least another seamount as revealed by magnetic anomalies across the landward slope of the trench. Deeper future studies will be necessary to discriminate between the two following hypothesis about the origin of the curvature between both trenches: Is it due to the collision of an already subducted chain of seamounts? or does it correspond to one of the failure lines of the America/Eurasia plate boundary?     

Lower crustal seismic velocity-anomalies; magmatic underplating or serpentinized peridotite? Evidence from the Vøring Margin,NE Atlantic

On the Vøring volcanic passive margin offshore mid-Norway, NE Atlantic, a lower crustal body with P-wave velocities in the range of 7.1–7.7 km/s has been mapped by twenty two-dimensional Ocean Bottom Seismograph (OBS) profiles. The main aim of the present paper is to evaluate to what extent the lower crust is consistent with magmatic intrusions or serpentinized peridotite. The relatively low V _p/V _s ratios of 1.75–1.78 modelled for the lower crust under the continental part of the Vøring Plateau are consistent with mafic intrusions mixed with blocks of stretched continental crust, but not with the presence of partially serpentinized peridotites. The lower crustal high-velocity body is restricted to the area of the Late Cretaceous/Early Tertiary rift that lead to continental break-up in Early Eocene. The same model can explain the observations in the northern Vøring Basin, but in the central and southern Vøring Basin the seismic velocities do not preclude a model involving serpentinized peridotite in addition to intrusions and continental remnants. On the west Iberia non-volcanic margin a similar layer is interpreted as serpentinized peridotite. The existence of Moho reflections, the observation of S-wave anisotropy but absence of P-wave anisotropy, uncertainties regarding supply of water to allow for significant serpentinization and very low stretching factors compared with the west Iberia Margin, are among factors that argue against the presence of serpentinized peridotite in the Vøring Basin.     

Paleotectonic structures and their influence on recent seismo-tectonics in the south Kuril subduction zone

Abstract Bathymetric data from south of Hokkaido obtained during a cruise of R/V Hakuho-Maru are summarized, and their correlation with earthquake occurrence is discussed. There are structural lineations on the seaward slope of the Kuril Trench, oblique to the Kuril Trench axis and parallel to the magnetic lineations in the Pacific plate. The structural lineations comprise horst-grabens generated by normal faulting. This suggests that Cretaceous tectonic structures originating at the spreading centre affect present seismotectonics around the trench axis. The structural-magnetic relation is compared to the case of the Japan Trench. North-east of the surveyed area, there are two major fracture zones (Nosappu Fracture Zone and Iturup Fracture Zone) that divide the oceanic plate into three segments. If the fracture zones (FZ) and the zone of paleo-mechanical weakness, represented by magnetic lineations, can control the direction of normal faults at a trench, the extent of the resulting topographic roughness on the seaward slope of the trench would be different across an FZ because of the differences in ages. By studying recent large earthquakes occurring in the south Kuril region, it is shown that several main-aftershock distributions for large earthquakes in this region are bounded by the Nosappu FZ and the Iturup FZ. Two models (Barrier model and Rebound model) are presented to interpret earthquake occurrence near the south Kuril Islands. The Barrier model explains seismic boundaries seen in several examples for earthquake occurrence in the south Kuril regions. The fracture zone forming the boundary of two segments with different magnetic lineations is also the boundary of two different normal fault systems on their ocean bottom, and the difference in sea-bottom roughness between two normal fault systems should affect the seismic coupling at a plate interface. Due to the difference of seismic coupling, earthquake occurrence is controlled by an FZ and then the FZ acts as a seismic boundary (Barrier model). Existing normal faults created by plate bending of subducting oceanic plate should rebound after its subduction (Rebound model). This rebound of normal faults may cause intraplate earthquakes with a high-angle reverse-fault mechanism such as the 1994 Shikotan Earthquake. The energy released by an intraplate earthquake generated by normal-fault rebounding is not directly related to that of interplate earthquakes such as low-angle thrust earthquakes. It is a reason why large earthquakes occurred in the same region during a relatively short period.     

Normal faulting of the Daiichi-Kashima Seamount in the Japan Trench revealed by the Kaiko I cruise, Leg 3

A detailed topographic and geophysical survey of the Daiichi-Kashima Seamount area in the southern Japan Trench, northwestern Pacific margin, clearly defines a high-angle normal fault which splits the seamount into two halves. A fan-shaped zone was investigated along 2–4 km spaced, 100 km long subparallel tracks using narrow multi-beam (Seabeam) echo-sounder with simultaneous measurements of gravity, magnetic total field and single-channel seismic reflection records. Vertical displacement of the inboard half was clearly mapped and its normal fault origin was supported. The northern and southern extensions of the normal fault beyond the flank of the seamount were delineated. Materials on the landward trench slope are displaced upward and to sideways away from the colliding seamount. Canyons observed in the upper landward slope terminate at the mid-slope terrace which has been uplifted since start of subduction of the seamount. Most of the landward slope except for the landward walls aside the seamount comprises only a landslide topography in a manner similar to the northern Japan Trench wall. This survey was conducted on R/V “Jean Charcot” as a part of the Kaiko I cruise, Leg 3, in July–August 1984 under the auspices of the French-Japanese scientific cooperative program.     

Hill stability of the planar three-body problem: General and restricted cases

The equations of motion of the planar three-body problem split into two parts, called an external part and an internal part. When the third mass approaches zero, the first part tends to the equations of the Kepler motion of the primaries and the second part to the equations of motion of the restricted problem.We discuss the Hill stability from these equations of motion and the energy integral. In particular, the Jacobi integral for the circular restricted problem is seen as an infinitesimal-mass-order term of the Sundman function in this context.     

Ocean bottom seismograph development at Hawaii Institute of Geophysics

Three distinct ocean bottom seismograph (OBS) systems have been developed at the Hawaii Institute of Geophysics to satisfy the different requirements for short-range refraction and anisotropy experiments, long-range refraction experiments, and short-term and semi-permanent monitoring for earthquakes. One system, originally designed for semi-permanent use in conjunction with a monster buoy of the IDOE North Pacific Experiment has been modified for emplacement off Oahu. It contains 3-component 1 Hz seismometers and a hydrophone and obtains power and transmits data via tow conductor cable. Two additional systems were designed for short-term use: a 2 Hz telemetering system (TOBS); and 4.5 Hz free-fall pop-up system (POBS). The TOBS contains 3-component seismometers and a hydrophone and transmits data to the ship via light-weight single-conductor electromechanical cable and an HF-VHF radio link from a surface buoy. The bottom package also includes a backup tape recorder. This system exhibits the advantages of real-time data acquisition (e.g. precise timing, rapid appraisal of data quality, optimum use of explosives, and common recording with other data) and the complexities and difficulties associated with a deep-sea mooring. However, use of cable with near neutral bouyancy permits the design of a deep-water system with low weights and stress levels. The POBS is a self-contained package containing a vertical and single horizontal seismometer, hydrophone, cassette tape recorder, and pre-set timed release. This system is relatively simple and inexpensive. Total weight of 150 kg in air (before launch) permits emplacement and retrieval from a ship with no special equipment by two (strong) persons. Experience to data suggests that the optimum deployment scheme for many studies is a combination of TOBS's and POBS's.Hawaii Institute of Geophysics Contribution 835.