渤海GNSS-R机载测风试验及其反演结果

对渤海GNSS-R机载试验进行了海面风场反演.结果表明,风速精度优于1 m/s,风向精度优于20°.     

中国大陆活动地块的运动与应变状态

从地壳运动与应变的角度给出了活动地块的定义,根据中国大陆及周边地区最近几年GPS观测得到的由1598个GPS站速度组成的统一速度场,估计了各个活动地块的运动与应变参数,分析了各个活动地块的运动与应变状态。中国大陆各地块存在一致的向东运动分量,但其南北分量是不一致的。西部地块存在一致的向北运动分量,东部地块存在一致的向南运动分量。在90°E以东,从喜马拉雅地块向NE方向,各地块的运动方向按顺时针方向旋转,各地块的运动速率是不相同的。从总体上看是西部大、东部小,南部大、北部小,西部大约是东部的3～4倍。各地块主压应变方向的空间分布是不相同的。在90°E以西各地块的主应变方向基本上为SN向,在青藏高原的东北部各地块的主压应变方向基本为NE向,在青藏高原东南部各地块的主压应变方向绕喜马拉雅构造东端顺时针方向旋转。各地块的主应变与剪应变率也是不同的,其中喜马拉雅、天山地块的主压和最大剪应变率最高,其次是拉萨、羌塘、滇西南、祁连与川滇地块。东部各地块的应变率较小。根据应变状态推测,喜马拉雅地块南北向的缩短速率为(15.2±1.5)mm/a,仍然是现今构造活动最强烈的地区,其次是天山地块,天山地块南北向的缩短速率为(10.1±0.9)mm/a。这两个地块目前仍处于隆升状态,从面应变看,面膨胀在中国大陆占优势,东部基本都是膨胀区,在西部面压缩与面膨胀从南向北相间分布。中国大陆的大多数东西向或近东西向断裂两侧的相对运动都是左旋或类似左旋走滑型的,大多数南北向断裂两侧的相对运动都是右旋或类似右旋走滑型的。GPS测定的阿尔金断裂中部的左旋走滑速为(4.8±1.3)mm/a,鲜水河断裂的左旋走滑速为(9.8±2.2)mm/a。地块边界断裂带的运动为地块运动创造了条件,地块及其边界的运动是协调一致的统一的,各个地块的活动程度是不相同的,统计检验结果表明,大多数地块之间的相对运动是显著的与非常显著的,这证明活动地块是客观存在的,喜马拉雅、拉萨、天山、羌塘和滇西南是活动最强烈的地块,中蒙、中朝西、阿拉善和华南是较稳定的地块,印度、太平洋、菲律宾板块与欧亚板块的互相作用力是中国大陆地块运动的主要驱动力。青藏高原地壳物质在印度板块NNE向的强烈推挤下,向NNE和NE方向运动,由于受到北部、东北部和东部地块的阻挡,经高原的东南部向印度洋方向运移,     

NNR constraint in ITRF2000 and the new global plate motion model NNR-ITRF2000VEL

There are 54 sites employed by ITRF2000 for ITRF2000 orientation. The deficiencies are obvious. First, these sites cannot well represent the rotation rate of the earth crust because there is no selected site in five out of fourteen tectonic plates and three of fourteen plates only have one site each. Second, the total angular momentum of the crust is non-vanishing in ITRF2000, even though it is declared that No Net Rotation (NNR) with respect to NNR-NUVEL1A is imposed on ITRF2000 construction according to the documentations of ITRF2000. So the NNR condition in conventional terrestrial reference system (CTRS) realization cannot be satisfied in ITRF2000. In this paper, the criteria of site selection for estimating the Euler vectors are suggested; the Tisserand system constraint equation in ITRF construction is derived; and as a product, the global plate motions can be obtained from the ITRF2000 construction.     

Movement and strain conditions of active blocks in the Chinese mainland

The definition of active block is given from the angles of crustal deformation and strain. The movement and strain parameters of active blocks are estimated according to the unified velocity field composed of the velocities at 1598 GPS stations obtained from GPS measurements carried out in the past years in the Chinese mainland and the surrounding areas. The movement and strain conditions of the blocks are analyzed. The active blocks in the Chinese mainland have a consistent E-trending movement component, but its N and S components are not consistent. The blocks in the western part have a consistent N-trending movement and the blocks in the eastern part have a consistent S-trending movement. In the area to the east of 90°E, that is the area from Himalayas block towards NE, the movement direction of the blocks rotates clockwisely and the movement rates of the blocks are different. Generally, the movement rate is large in the west and south and small in the east and north with a difference of 3 to 4 times between the rates in the west and east. The distributions of principal compressive strain directions of the blocks are also different. The principal strain of the blocks located to the west of 90oE is basically in the SN direction, the principal compressive strain of the blocks in the northeastern part of Qingzang plateau is roughly in the NE direction and the direction of principal compressive strain of the blocks in the southeastern part of Qingzang plateau rounds clockwisely the east end of Himalayas structure. In addition, the principal strain and shear strain rates of the blocks are also different. The Himalayas and Tianshan blocks have the largest principal compressive strain and the maximum shear strain rate. Then, Lhasa, Qiangtang, Southwest Yunnan (SW Yunnan), Qilian and Sichuan-Yunan (Chuan-Dian) blocks followed. The strain rate of the blocks in the eastern part is smaller. The estimation based on the stain condition indicates that Himalayas block is still the area with the most intensive tectonic activity and it shortens in the NS direction at the rate of 15.2±1.5 mm/a. Tianshan block ranks the second and it shortens in the NS direction at the rate of 10.1±0.9 mm/a. At present, the two blocks are still uprising. It can be seen from superficial strain that the Chinese mainland is predominated by superficial expansion. Almost the total area in the eastern part of the Chinese mainland is expanded, while in the western part, the superficial compression and expansion are alternatively distributed from the south to the north. In the Chinese mainland, most EW-trending or proximate EW-trending faults have the left-lateral or left-lateral strike-slip relative movements along both sides, and most NS-trending faults have the right-lateral or right-lateral strike-slip relative movements along both sides. According to the data from GPS measurements the left-lateral strike-slip rate is 4.8±1.3 mm/a in the central part of Altun fault and 9.8±2.2 mm/a on Xianshuihe fault. The movement of the fault along the block boundary has provided the condition for block movement, so the movements of the block and its boundary are consistent, but the movement levels of the blocks are different. The statistic results indicate that the relative movement between most blocks is quite significant, which proves that active blocks exist. Himalayas, Tianshan, Qiangtang and SW Yunnan blocks have the most intensive movement; China-Mongolia, China-Korea (China-Korea), Alxa and South China blocks are rather stable. The mutual action of India, Pacific and Philippine Sea plates versus Eurasia plate is the principal driving force to the block movement in the Chinese mainland. Under the NNE-trending intensive press from India plate, the crustal matter of Qingzang plateau moves to the NNE and NE directions, then is hindered by the blocks located in the northern, northeastern and eastern parts. The crustal matter moves towards the Indian Ocean by the southeastern part of the plateau.     

Analysis on the noises from continuously monitoring GPS sites

In this paper,we analyze the time series of site coordinates of 27 continuously monitoring GPS sites covered bythe Crustal Movement Observation Network of China over the whole country.The data are obtained in the periodfrom the beginning of the observation to the November of 2005.On the basis of data processing,we analyze thepower spectrum density of coordinate component noise at each site and calculate the spectral indexes manifestingthe noise property of each component.The spectral indexes indicate that for most sites,the noise of time series ofeach coordinate component can be addressed by the model of white noise flicker noise;and for a small amountof sites,it can be described by the model of white noise flicker noise random walk noise.We also quantita-tively estimate each noise component in the model by using the criterion of maximum likelihood estimation.Theresult shows that the white noise in the time series of GPS site coordinates does not constitute the main part ofnoise.Therefore,the error estimation of site movement parameters is usually too small,or too optimistic if weconsider the white noise only.Correspondingly,if this factor is not fully considered in explaining these movementparameters,it might mislead the readers.     

利用机载GNSS反射信号反演海面风速的研究

全球卫星导航定位系统的反射信号(GNSS-R)遥感技术作为一种新型的、低成本的、高机动性的海面微波遥感测风技术,与其他测风手段优势互补,可以增加测风手段的多样性,弥补局部测风手段不足的状况。研究了接收机在机载高度时,GPS反射信号功率理论模型四部分函数的性质,在此基础之上,数值模拟了机载高度下理论相关功率波形,基于海面风速对波形峰值与后沿的影响,提出了一种能够兼顾所有理论波形信息的二维插值风速反演方法。利用该方法,结合实测机载数据对海面风速进行反演,反演的风速均值与附近测站风速均值相差为1.4 m/s,与浮标数据相一致。     

中国大陆水平地壳运动的数学模型

在获得中国区域1000个实测GPS台站速度场的基础上,利用多面函数法、滑动欧拉矢量法和滑动弹塑性模型法建立了中国大陆水平地壳运动模型,统计表明3种方法外部符合精度2～4mm/a,模型互差精度约为3mm/a。     

分形随机漫步噪声及相关函数

讨论了在地学、工程测量研究领域常见的随机漫步噪声,从理论上将经典布朗运动随机过程(随机漫步噪声)推广到分形布朗运动随机过程,并导出分形布朗运动随机过程的相关函数。     

应用单历元模糊度算法解决实时GPS水汽探测技术中模糊度问题

首先简要介绍实时水汽探测技术的原理,然后采用详细的推算过程将求水汽量转化为求宽巷模糊度的问题,并利用双频P码求出宽巷模糊度。运用实例模拟分析双频P码求宽巷模糊度的精度,解释宽巷模糊度的精度随卫星高度角变化的原因。