An epidemiologic, clinical, and therapeutic study of childhood Guillain-Barré syndrome in Kuwait: is it related to the oral polio vaccine?

We studied Guillain-Barré syndrome, affecting children 12 years old or less, throughout Kuwait, in the period between January 1, 1992, and March 31, 1997. Nineteen children had the diagnostic criteria of Guillain-Barré syndrome, with an overall annual incidence rate of 0.95/100,000 population at risk. Female patients outnumbered male patients with a sex ratio of 1.4:1. There was a clustering of cases in winter and spring and in the year 1996. The disease symptoms were relatively severe in our patients because only 16% (3 of 19) of them were able to walk at the height of their illness, whereas the rest were bed or chair bound or needed assisted ventilation. Two patients had the electrodiagnostic features of axonal neuropathy and both had residual deficits on follow-up, whereas the rest recovered fully. All the patients received intravenous immunoglobulin. The mean time to walk unaided was 23.5 days (range, 2-84 days) after intravenous immunoglobulin and excluding the two patients with axonal neuropathy, and full recovery was achieved in a mean time of 103 days (range, 30-300 days). Contrary to previous studies, we found no correlation between oral polio vaccine administration and Guillain-Barré syndrome in 2 successive years (1995 and 1996) during a nationwide campaign targeting children less than 5 years old.     

Synthesis and characterization of polyaniline films using Fenton reagent

The chemical oxidation of aniline to form polyaniline (PANI) films and powder samples was made using Fenton reagent as an oxidizing agent in aqueous sulfuric acid medium. The PANI films were monitored by using the quartz crystal microbalance and the electronic absorption techniques. The optimum concentration was determined and the results were justified by measuring the UV–vis absorption spectra for the in situ PANI films. The conductivity for the PANI films and powder samples, prepared in different conditions, was measured. Also, the IR spectra, X‐ray and the thermogravimetric analysis for the PANI powder formed in the bulk were measured and compared with the polymer prepared using ammonium peroxydisulfate. A preliminary investigation to the dielectric properties of the polymer powder was measured and discussed. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Deep learning controller for nonlinear system based on Lyapunov stability criterion

Neural Computing and Applications - For the current paper, the technique of feed-forward neural network deep learning controller (FFNNDLC) for the nonlinear systems is proposed. The FFNNDLC...     

GRAIL: a scalable index for reachability queries in very large graphs

Given a large directed graph, rapidly answering reachability queries between source and target nodes is an important problem. Existing methods for reachability tradeoff indexing time and space versus query time performance. However, the biggest limitation of existing methods is that they do not scale to very large real-world graphs. We present a simple yet scalable reachability index, called GRAIL, that is based on the idea of randomized interval labeling and that can effectively handle very large graphs. Based on an extensive set of experiments, we show that while more sophisticated methods work better on small graphs, GRAIL is the only index that can scale to millions of nodes and edges. GRAIL has linear indexing time and space, and the query time ranges from constant time to being linear in the graph order and size. Our reference C++ implementations are open source and available for download at http://www.code.google.com/p/grail/.     

Cooled, ultrahigh Q, sapphire dielectric resonators for low-noise, microwave signal generation

Ultra-high Q, X-band resonators, used in a frequency discriminator for stabilization of a low-noise signal generator, can provide a means of obtaining significant reduction in phase noise levels. Resonator unloaded Qs on the order of 500 K can be obtained in sapphire dielectric resonator (DR) operating on a low-order (i.e. TE(01)) mode at 77 K and employing high-temperature superconducting (HTS) films installed in the DR enclosure covers. Rigorous analysis for the determination of resonator frequency, modes, and unloaded Q have been carried out using mode matching techniques. Trade-off studies have been performed to select resonator dimensions for the optimum mode yielding highest unloaded Q and widest spurious mode separation. Field distributions within the resonator have been computed to enable practical excitation of the required mode. The results of both analysis and prototype device evaluation experiments are compared for resonators fabricated using enclosures consisting of conventional, metal sidewalls and covers employing HTS films as a function of cover conductivity.     

Combustion synthesis of NbC/ZrO2 composites: Influence of Cr additives on the microstructure and mechanical properties

Composites of NbC/ZrO₂ reinforced with different weight ratios of Cr metal were prepared by dynamic compaction combustion from a blend of Nb₂O₅–Zr–Cr powders. Factors controlling the synthesis process, the microstructure, and the mechanical properties of the samples, such as Cr wt% and the compression loads were studied. The samples were characterized by XRD, SEM, porosity, and hardness measurements. The porosity value of the sample with no additives was high and reached 31.6 vol%. A sudden decrease in the sample porosity to 2.4 vol % was noticed for the sample containing 3.0 wt% of Cr. A high-density sample with less than 2.0 vol % porosity and maximum hardness of 1038 HV was produced using 5.0 wt% Cr under 300 MPa compression load. Detailed thermodynamic calculations for the effect of Cr additives on the physicochemical properties of the system were introduced.     

A rapid test to measure performance,emission and wear of a diesel engine fueled with palm oil diesel

Results of performance, emission and tribological evaluations of palm oil methyl ester and its blends with conventional diesel in an automobile diesel engine test bed are presented. Polymerization and carbon deposits on the fuel injector were monitored. CO, CO₂, O₂, combustion efficiency and temperature of exhaust gases were also measured. Palm oil methyl ester and its blends have great potential as alternative diesel fuel. Performance and exhaust gas emission for palm oil methyl ester and its blends with conventional diesel are comparable with those of conventional diesel fuel. Palm oil methyl ester does not pose a severe environmental problem and will not deteriorate engine and bearing components.     

Graft Copolymerization of Acrylamide onto Oil Palm Empty Fruit Bunch (OPEFB) Fiber

Grafting of acrylamide (AAm) onto oil palm empty fruits bunch fiber using hydrogen peroxide as initiator and methyl acrylate as comonomer was investigated. The amount of comonomer needed to make grafting of acrylamide possible was determined. The percentage of poly(acrylamide) and the comonomer in the final graft copolymer was estimated by elemental analysis. Results obtained indicated that methyl acrylate facilitated the incorporation of acrylamide monomer onto OPEFB. The reactivity ratios for both monomers were determined by using Fineman–Ross plot. The effects of reaction temperature and period as well as amount of the initiator, solvent, monomer and comonomer on the percentage of grafting at fixed amount of comonomer (11 mmol) were studied. Maximum percentage of grafting was achieved when the amount of initiator and solvent 3.98×10⁻³ mol and 50 mL respectively. The optimum reaction temperature was 50 ^○C and the reaction period was 90 min. Highest percentage of grafting was 232% when 25.6 mmol of acrylamide was used under these optimum conditions. The presence of functional group in the grafted polymer is characterized by infrared spectroscopy and the surface morphology is observed by scanning electron microscopy. Thermoanalytic investigation on OPEFB and OPEFB-g-PAAM were carried out to evaluate the thermal stability and respective activation energy of the materials.     

SimClus: an effective algorithm for clustering with a lower bound on similarity

Clustering algorithms generally accept a parameter k from the user, which determines the number of clusters sought. However, in many application domains, like document categorization, social network clustering, and frequent pattern summarization, the proper value of k is difficult to guess. An alternative clustering formulation that does not require k is to impose a lower bound on the similarity between an object and its corresponding cluster representative. Such a formulation chooses exactly one representative for every cluster and minimizes the representative count. It has many additional benefits. For instance, it supports overlapping clusters in a natural way. Moreover, for every cluster, it selects a representative object, which can be effectively used in summarization or semi-supervised classification task. In this work, we propose an algorithm, SimClus, for clustering with lower bound on similarity. It achieves a O(log n) approximation bound on the number of clusters, whereas for the best previous algorithm the bound can be as poor as O(n). Experiments on real and synthetic data sets show that our algorithm produces more than 40% fewer representative objects, yet offers the same or better clustering quality. We also propose a dynamic variant of the algorithm, which can be effectively used in an on-line setting.