In situ observation of synthesized nanoparticles in ultra-dilute aerosols via X-ray scattering

In-air epitaxy of nanostructures (Aerotaxy) has recently emerged as a viable route for fast, large-scale production. In this study, we use small-angle X-ray scattering to perform direct in-flight characterizations of the first step of this process, i.e., the engineered formation of Au and Pt aerosol nanoparticles by spark generation in a flow of N₂ gas. This represents a particular challenge for characterization because the particle density can be extremely low in controlled production. The particles produced are examined during production at operational pressures close to atmospheric conditions and exhibit a lognormal size distribution ranging from 5–100 nm. The Au and Pt particle production and detection are compared. We observe and characterize the nanoparticles at different stages of synthesis and extract the corresponding dominant physical properties, including the average particle diameter and sphericity, as influenced by particle sintering and the presence of aggregates. We observe highly sorted and sintered spherical Au nanoparticles at ultra-dilute concentrations (< 5 × 10⁵ particles/cm³) corresponding to a volume fraction below 3 × 10^–10, which is orders of magnitude below that of previously measured aerosols. We independently confirm an average particle radius of 25 nm via Guinier and Kratky plot analysis. Our study indicates that with high-intensity synchrotron beams and careful consideration of background removal, size and shape information can be obtained for extremely low particle concentrations with industrially relevant narrow size distributions.

     

Design and Characterization of a New pVII Combinatorial Phage Display Peptide Library for Protease Substrate Mining Using Factor VII Activating Protease (FSAP) as Model

We describe a novel, easy and efficient combinatorial phage display peptide substrate-mining method to map the substrate specificity of proteases. The peptide library is displayed on the pVII capsid of the M13 bacteriophage, which renders pIII necessary for infectivity and efficient retrieval, in an unmodified state. As capture module, the 3XFLAG was chosen due to its very high binding efficiency to anti-FLAG mAbs and its independency of any post-translational modification. This library was tested with Factor-VII activating protease (WT-FSAP) and its single-nucleotide polymorphism variant Marburg-I (MI)-FSAP. The WT-FSAP results confirmed the previously reported Arg/Lys centered FSAP cleavage site consensus as dominant, as well as reinforcing MI-FSAP as a loss-of-function mutant. Surprisingly, rare substrate clones devoid of basic amino acids were also identified. Indeed one of these peptides was cleaved as free peptide, thus suggesting a broader range of WT-FSAP substrates than previously anticipated.     

Purification and characterization of an endopeptidase from Lactobacillus delbrueckii subsp. bulgaricus B14

An intracellular endopeptidase was purified from cell-free extracts of Lactobacillus delbrueckii subsp. bulgaricus B14 by anion exchange chromatography on DEAE-Sepharose, hydroxyapatite chromatography, second anion exchange chromatography on Mono-Q, and metal-chelating affinity chromatography. The endopeptidase was a monomer with a molecular mass of approximately 70 kDa determined by SDS-PAGE and gel filtration. Various oligopeptides (e.g. Met-enkephalin, bradykinin) were hydrolysed by the endopeptidase. Exopeptidase activity and cleavage of dipeptides or tripeptides was not observed. The K_M value for the cleavage of Metenkephalin was 1.2 mM. Temperature and pH optima were 47 °C and pH 7.7, respectively. The endopeptidase was inhibited by the classical agents for metal-dependent (EDTA) and serine (DFP) enzymes. Activity was increased by Co²⁺ and Mg²⁺, no effect was observed with Ca²⁺. After inhibition with EDTA, enzyme activity could be restored fully by Co²⁺. Activity was inhibited by Zn²⁺, Mn²⁺, Fe²⁺, Cu²⁺, Cd²⁺ and Hg²⁺. The N-terminal sequence of the endopeptidase was determined as: H₂N-Val-Arg-Gly-Gly-Ser-Gly-Asp-Thr-Thr-Val-0H.     

Mediator-Related Symptoms and Anaphylaxis in Children with Mastocytosis

Mastocytosis is characterized by the pathological accumulation of mast cells (MC) in various organs. In these patients, MC may degranulate and thereby contribute to clinical symptoms, especially when a concomitant allergy is present. However, MC activation can not only be induced by high-affinity receptors for IgE, but also by anaphylatoxins, neuropeptides, IgG immune complexes, complement-components, drugs, products of bacteria or parasites, as well as physical factors such as heat, cold, vibration, stress, sun, or physical effort. Symptoms due to mediators released by activated MC may develop in adults suffering from systemic mastocytosis, but also evolve in children who usually have cutaneous mastocytosis (CM). Clinically, CM is otherwise characterized by typical brown, maculopapular skin lesions or mastocytoma associated with a positive Darier’s sign. Pruritus and flushing are common and blistering may also be recorded, especially in diffuse CM (DCM). Pediatric patients with mastocytosis may also have gastrointestinal, respiratory, and neurologic complaints. Although anaphylaxis is not a typical finding, pediatric patients with massive skin involvement and high tryptase levels have a relatively high risk to develop anaphylaxis. This paper reviews MC mediator-related symptoms and anaphylaxis in children with mastocytosis, with special emphasis on risk factors, triggers, and management.     

The Effect of Small Additions of Fe and Heavy Deformation on the Precipitation in an Al–1.1Mg–0.5Cu–0.3Si At. Pct Alloy

Metallurgical and Materials Transactions A - The effect of 0.03 and 0.08 at. pct Fe additions on the formation of secondary phases in an Al–1.1Mg–0.5Cu–0.3Si at. pct alloy was...     

Advanced experimental and numerical methods for the analysis of the dynamic forming press behavior

Numerical simulations are used to estimate the dynamic behavior of new concepts of forming presses as well as to improve the dynamic properties of existing machines. These simulations are to be parametrized with appropriate values in order to yield most accurate results. In many cases neither the way of building up the simulation model for the specific problem nor an appropriate method for gathering the needed date are given in advance. Regarding these facts this paper intends both to characterize the way of building up complex simulation models by using basic simulation modules and to describe methods for the identification of the needed parameters that work even under conditions that hitherto made parameter identifications impossible or at least very time-consuming. In this context recent developments in simulating press dynamics will also be characterized as new modal analysis methods that are not yet established in the field of forming technique. The research activities were financed by the European Research Association for Sheet Metal Working.     

The content and composition of sterols and sterol esters in low erucic acid rapeseed (Brassica napus)

The low temperature crystallization technique for the enrichment of “minor” components, such as sterols and sterol esters, from vegetable oils was applied to low erucic acid rapeseed oils. The recovery of free sterols and sterol esters was estimated by use of¹⁴C-cholesterol and¹⁴C-cholesterol oleate. 80% of the free sterols and 45% of the sterol esters were recovered in the liquid fraction, while in two studies total recoveries were 95% and 99%, respectively. This technique showed some selectivity toward the sterol bound fatty acids when compared to direct preparative thin layer chromatography (TLC) of the crude oil. Gas liquid chromatography (GLC) analysis of the free and esterified sterols as TMS-derivatives showed very little selectivity in the enrichment procedure. The fatty acid patterns of the sterol esters demonstrated, however, a preference in the liquid fraction for those sterol esters which have a high linoleic and linolenic acid content. The content of free sterols was 0.3–0.4% and that of sterol esters 0.7–1.2% of the rapeseed oils in both winter and summer types of low erucic acid rapeseed (Brassica napus) when the lipid classes were isolated by direct preparative TLC of the oils. The free sterols in the seven cultivars or breeding lines analyzed were composed of 44–55% sitosterol, 27–36% campesterol, 17–21% brassicasterol, and a trace of cholesterol. The esterified sterols were 47–57% sitosterol, 36–44% campesterol, 6–9% brassicasterol, and traces of cholesterol and Δ5-avenasterol. The fatty acid patterns of these esters were characterized by ca. 30% oleic acid and ca. 50% linoleic acid, whereas these acids constitute 60% and 20%, respectively, of the total fatty acids in the oil. Little or no variation in sterol and sterol ester patterns with locality within Sweden was observed for the one cultivar of summer rapeseed investigated by the low temperature crystallization technique.     

An empirical study of control logic specifications for programmable logic controllers

This paper presents an empirical study of control logic specifications used to document industrial control logic code in manufacturing applications. More than one hundred input/output related property specifications from ten different reusable function blocks were investigated. The main purpose of the study was to provide understanding of how the specifications are expressed by industrial practitioners, in order to develop new tools and methods for specifying control logic software, as well as for evaluating existing ones. In this paper, the studied specifications are used to evaluate linear temporal logic in general and the specification language ST-LTL, tailored for functions blocks, in particular. The study shows that most specifications are expressed as implications, that should always be fulfilled, between input and output conditions. Many of these implications are complex since the input and output conditions may be mixed and involve sequences, timer issues and non-boolean variables. Using ST-LTL it was possible to represent all implications of this study. The few non-implication specifications could be specified in ST-LTL as well after being altered to suit the specification language. The paper demonstrates some advantages of ST-LTL compared to standard linear temporal logic and discusses possible improvements such as support for automatic rewrite of complex specifications.     

Variations in the composition of sterols,tocopherols and lignans in seed oils from fourSesamum species

Seeds from different collections of cultivatedSesamum indicum Linn and three related wild species [specifically,S. alatum Thonn.,S. radiatum Schum & Thonn. andS. angustifolium (Oliv.) Engl.] were studied for their oil contents and fatty acid composition of the total lipids. The oils from wild seeds were characterized by higher percentages of unsaponifiables (4.9, 2.6 and 3.7%, respectively) compared toS. indicum (1.4–1.8%), mainly due to their high contents of lignans. Total sterols accounted forca. 40, 22, 20 and 16% of the unsaponifiables of the four species, respectively. The four species were different in the relative percentages of the three sterol fractions (the desmethyl, monomethyl and dimethyl sterols) and in the percentage composition of each fraction. Campesterol, stigmasterol, sitosterol and Δ⁵-avenasterol were the major desmethyl sterols, whereas obtusifoliol, gramisterol, cycloeucalenol and citrostandienol were the major monomethyl sterols, and α-amyrin, β-amyrin, cycloartenol and 24-methylene cycloartanol were the main dimethyl sterols in all species. Differences were also observed among the four species in sterol patterns of the free sterols compared to the sterol esters.Sesamum alatum contained less tocopherols (210–320 mg/kg oil), andS. radiatum andS. angustifolium contained more tocopherols (ca. 750 and 800 mg/kg oil, respectively) than didS. indicum (490–680 mg/kg oil). The four species were comparable in tocopherol composition, with γ-tocopherol representing 96–99% of the total tocopherols. The four species varied widely in the identity and levels of the different lignans. The percentages of these lignans in the oils ofS. indicum were sesamin (0.55%) and sesamolin (0.50%).Sesamum alatum showed 1.37% of 2-episesalatin and minor amounts of sesamin and sesamolin (0.01% each).Sesamum radiatum was rich in sesamin (2.40%) and contained minor amounts of sesamolin (0.02%), whereS. angustifolium was rich in sesangolin (3.15%) and also contained considerable amounts of sesamin (0.32%) and sesamolin (0.16%).     

Variation in fatty acid composition of the different acyl lipids in seed oils from fourSesamum species

Seeds from different collections of cultivatedSesamum indicum Linn. and three related wild species [specifically,S. alatum Thonn.,S. radiatum Schum and Thonn. andS. angustifolium (Oliv.) Engl.] were studied for their oil content and fatty acid composition of the total lipids. The wild seeds contained less oil (ca. 30%) than the cultivated seeds (ca. 50%). Lipids from all four species were comparable in their total fatty acid composition, with palmitic (8.2–12.7%), stearic (5.6–9.1%), oleic (33.4–46.9%) and linoleic acid (33.2–48.4%) as the major acids. The total lipids from selected samples were fractionated by thin-layer chromatography into five fractions: triacylglycerols (TAG; 80.3–88.9%), diacylglycerols (DAG; 6.5–10.4%), free fatty acids (FFA; 1.2–5.1%), polar lipids (PL; 2.3–3.5%) and steryl esters (SE; 0.3–0.6%). Compared to the TAG, the four other fractions (viz, DAG, FFA, PL and SE) were generally characterized by higher percentages of saturated acids, notably palmitic and stearic acids, and lower percentages of linoleic and oleic acids in all species. Slightly higher percentages of long-chain fatty acids (20∶0, 20∶1, 22∶0 and 24∶0) were observed for lipid classes other than TAG in all four species. Based on the fatty acid composition of the total lipids and of the different acyl lipid classes, it seems thatS. radiatum andS. angustifolium are more related to each other than they are to the other two species.