The effect of Na addition on the first hydrogen absorption kinetics of cast hypoeutectic Mg–La alloys

With superior properties of Mg such as high hydrogen storage capacity (7.6 wt% H/MgH₂), low price, and low density, Mg has been widely studied as a promising candidate for solid-state hydrogen storage systems. However, a harsh activation procedure, slow hydrogenation/dehydrogenation process, and a high temperature for dehydrogenation prevent the use of Mg-based metal hydrides for practical applications. For these reasons, Mg-based alloys for hydrogen storage systems are generally alloyed with other elements to improve hydrogen sorption properties. In this article, we have added Na to cast Mg–La alloys and achieved a significant improvement in hydrogen absorption kinetics during the first activation cycle. The role of Na in Mg–La has been discussed based on the findings from microstructural observations, crystallography, and first principles calculations based on density functional theory. From our results in this study, we have found that the Na doped surface of Mg–La alloy systems have a lower adsorption energy for H₂ compared to Na-free surfaces which facilitates adsorption and dissociation of hydrogen molecules leading to improvement of absorption kinetic. The effect of Na on the microstructure of these alloys, such as eutectic refinement and a density of twins is not highly correlated with absorption kinetics.     

Distribution of carbon contamination in MgAl2O4 spinel occurring during spark-plasma-sintering (SPS) processing: I – Effect of heating rate and post-annealing

Carbon contamination from the carbon paper/dies during spark-plasma-sintering (SPS) processing was examined in the MgAl₂O₄ spinel. The carbon contamination sensitively changes with the heating rate during the SPS processing. At the high heating rate of 100 °C/min, the carbon contamination having organized structures occurred over almost the entire area from the surface to deep inside the SPSed spinel disk. In contrast, at the slow heating rate of 10 °C/min, the carbon contamination having disordered structures occurred only around the surface area. The carbon phases transform into high pressure CO/CO₂ gases by post-annealing in air and lead to pore formation along the grain junctions. The pore formation significantly occurs at the high heating rate due to the large amount of the contaminant carbon phases. This suggests that if once the carbon contamination was formed in the materials, it is very difficult to remove the carbon phases from the materials.     

A case of chronic encephalitis due to double infection with herpes simplex and measles viruses

In a healthy 49-year-old man, a decrease in job efficiency was noticed along with bizarre behavior. On admission, he was euphoric, childish, superficial and had increased libido. Neurological findings were normal. There were no abnormal findings on routine blood tests, hematochemistry or urine analysis. MRI showed no abnormal findings. However, single photon emission CT (SPECT) showed diffuse hypoaccummulation of tracer from the temporal to frontal regions. Lumbar puncture showed clear cerebrospinal fluid (CSF) with pleocytosis and an elevated protein level. Moreover, antibody IgG titers to herpes simplex virus (HSV) and measles virus were elevated, according to EIA [serum HSV -1,202.2x, measles virus 47.1x: CSF HSV-116.1x, measles virus 9.9x]. The ratio of serum to CSF antibody titers of HSV and measles virus were 12.5 and 4.75, respectively. The antibody index values of HSV and measles virus IgG titers were 8.42 and 22.22. The ratio of albumin was 105.7. Chronic, progressive HSV encephalitis is rare, and there have been very few reports of encephalitis due to double infection by HSV and another virus. Our patient was diagnosed as having encephalitis due to double infection with HSV and measles virus, because the ratio of serum to CSF antibody titers was less than 20 and the antibody index values were over 1.91. Moreover, since the IgG index was elevated and the ratio of albumin was not low, it was suggested that the blood-brain-barrier had not been disrupted, and antibodies were being produced chronically in the medullary cavity. Hyperaccummulation of tracer on SPECT studies has been reported in the early stages of HSV encephalitis. In our case, while CT and MRI showed no abnormal findings, SPECT showed diffuse hypoaccummulation. SPECT appears to be a useful tool in the diagnosis of this disorder. In case of chronic, progressive personality change in middle-aged adults, we must be aware of double virus infection of the brain as a possible causal factor.     

Characterization and electrochemical properties of CF4 plasma-treated boron-doped diamond surfaces

The effect of CF₄ plasma etching on diamond surfaces, with respect to treatment time, was investigated using scanning electron microscopy (SEM), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and electrochemical measurements. SEM observations and Raman spectra indicated an increase in surface roughening on a scale of 10–20 nm, and an increase in crystal defect density was apparent with treatment time in the range of 10 s to 30 min. In contrast, alteration of the diamond surface terminations from oxygen to fluorine was found to be rather rapid, with saturation of the F/C atomic ratio estimated from XPS analysis after treatment durations of 1 min and more. The redox kinetics of Fe(CN)₆^3−/4− was also found to be significantly modified after 10 s of CF₄ plasma treatment. This behavior shows that C–F terminations predominantly affect the redox kinetics compared to the effect on the surface roughness and crystal defects. The double-layer capacitance (C_dl) of the electrolyte/CF₄ plasma-treated boron-doped diamond interface was found to show a minimum value at 1 min of treatment. These results indicate that a short-duration CF₄ plasma treatment is effective for the fabrication of fluorine-terminated diamond surfaces without undesirable surface damage.     

Effectiveness of spatial representation in the formation of network communities: experimental study on community organizer

In this paper, we present and discuss Community Organizer, a system designed to support network communities. The main characteristic of Community Organizer is the use of spatial representations for the relationships among community members including the communications exchanged among these members. These spatial representations reflect the degree of closeness of interests and concerns among the members, and are intended to provide users with clues on how to form network communities. In order to investigate the effectiveness of the proposed spatial representations, we conducted experiments with two different versions of the software. One version offered meaningful spatial representations while the other version did not. The subjects who used the former software version felt a greater sense of ‘community’, enjoyed using the software more, and actively used it longer than the subjects using the latter software version (control condition). These results indicated that the proposed spatial representations are effective in supporting network community formation.     

Involvement of brain serotonergic function in lidocaine-induced convulsions in mice

Influences of drug-induced manipulations of central serotonergic function on lidocaine- and pentylenetetrazol (PTZ)-induced convulsions were examined in mice. Agents that suppressed serotonergic transmission increased, whereas drugs that facilitated serotonin (5-HT) function decreased the incidence of lidocaine-induced convulsions. These treatments had similar influences on the incidence of PTZ-induced convulsions. Lidocaine (10(-5)-10(-3) M) reduced the stimulation evoked [3H]5-HT release from cortical slices, followed with an increased spontaneous [3H] overflow at higher concentrations. These results may suggest that brain 5-HT neurons are causally involved as inhibitory neurons in lidocaine-induced convulsions as in the case of PTZ-induced convulsions.     

Boron removal by titanium addition in solidification refining of silicon with Si-Al melt

In order to effectively remove B from Si for its use in solar cells, a process involving B removal by solidification refining of Si using a Si-Al melt with Ti addition was investigated. For clarifying the effect of Ti addition on B removal from the Si-Al melt, TiB₂ solubilities in Si-64.6 at. pct Al melt at 1173 K and Si-60.0 at. pct Al melt at 1273 K were determined by measuring the equilibrium concentrations of B and Ti in the presence of TiB₂ precipitates. The small solubilities of TiB₂ in the Si-Al melt indicate the effective removal of B from the Si-Al melt by Ti addition. Further, solidification experiments of Si-Al alloys containing B by Ti addition were performed, and the effect of Ti addition on the solidification refining of Si with the Si-Al melt was successfully confirmed.