In situ observation of synthesized nanoparticles in ultra-dilute aerosols via X-ray scattering

In-air epitaxy of nanostructures (Aerotaxy) has recently emerged as a viable route for fast, large-scale production. In this study, we use small-angle X-ray scattering to perform direct in-flight characterizations of the first step of this process, i.e., the engineered formation of Au and Pt aerosol nanoparticles by spark generation in a flow of N₂ gas. This represents a particular challenge for characterization because the particle density can be extremely low in controlled production. The particles produced are examined during production at operational pressures close to atmospheric conditions and exhibit a lognormal size distribution ranging from 5–100 nm. The Au and Pt particle production and detection are compared. We observe and characterize the nanoparticles at different stages of synthesis and extract the corresponding dominant physical properties, including the average particle diameter and sphericity, as influenced by particle sintering and the presence of aggregates. We observe highly sorted and sintered spherical Au nanoparticles at ultra-dilute concentrations (< 5 × 10⁵ particles/cm³) corresponding to a volume fraction below 3 × 10^–10, which is orders of magnitude below that of previously measured aerosols. We independently confirm an average particle radius of 25 nm via Guinier and Kratky plot analysis. Our study indicates that with high-intensity synchrotron beams and careful consideration of background removal, size and shape information can be obtained for extremely low particle concentrations with industrially relevant narrow size distributions.

     

A new method for manufacturing nanostructured electrodes on glass substrates

The present paper describes a new method for manufacturing a nanostructured porous layer of TiO₂ on a conducting glass substrate for use in a dye-sensitized photoelectrochemical cell. The method involves deposition of a layer of semiconductor particles onto a conducting substrate and compression of the particle layer to form a mechanically stable, electrically conducting, and porous nanostructured film at room temperature. Photoelectrochemical characteristics and morphology of the resulting nanostructured films are presented. The potential use of the new manufacturing method in the future applications of nanostructured systems is discussed.     

Fast internal dynamics in polyelectrolyte gels measured by dynamic light scattering

Summary Dynamic light scattering was used to investigate the dynamics of sodium poly(styrene sulfonate) and fully neutralized poly(acrylic acid) gels as a function of the degree of swelling and weight ratio of cross-linking agent. It was shown that the collective diffusion coefficient increases with increasing degree of swelling and that the diffusion coefficient shows stronger concentration dependence than predicted by scaling arguments. For gel samples measured at the swelling equilibrium, the diffusion coefficient increases with increasing gel concentration for both gel systems.     

Copper malabsorption in coeliac disease

Copper uptake during three hours from an oral test dose of copper sulphate solution giving three mg Cu++, close to the recommended daily dietary intake, was significantly reduced in patients with proximal intestinal disease, compared with normal subjects. Three out of ten patients had abnormal and otherwise unexplained blood counts compatible with the known haematological effects of copper deficiency and were restored to normal levels on a gluten-free diet. Copper deficiency and proximal intestinal disease should be suspected in patients with otherwise unexplained anaemia, especially neutropenia.     

Postural and symptomatic improvement after physiotherapy in patients with dizziness of suspected cervical origin

OBJECTIVE: To assess postural performance in patients with dizziness of suspected cervical origin in whom extracervical causes had been excluded, and to assess the effects of physiotherapy on postural performance and subjective complaints of neck pain and dizziness. DESIGN: Prospective, randomized, controlled trial. SETTING: Primary care centers and a tertiary referral center. PATIENTS AND SUBJECTS: Of 65 referrals, 43 patients were excluded because extracervical etiology was suspected. Of the remaining 22 patients, 17 completed the study (15 women, 2 men, x age 37 yr, range 26-49). The controls were 17 healthy subjects (15 women, 2 men, x age 36 yr, range 25-55). INTERVENTION: Physiotherapy based on analysis of symptoms and findings, and aimed to reduce cervical discomfort. Patients were randomized either to receive immediate physiotherapy (n = 9), or to wait 2 months, undergo repeat measurements, and then receive physiotherapy (n = 8). MAIN OUTCOME MEASURES: Posturography, measuring velocity and variance of vibration-induced body sway and variance of galvanically induced body sway. Subjective intensity of neck pain (Visual Analog Scale ratings, 0-100), intensity and frequency of dizziness (subjective score 0-4). RESULTS: The patients manifested significantly poorer postural performance than did healthy subjects (.05 > p > .0001). Physiotherapy significantly reduced neck pain and intensity and the frequency of dizziness (p < .01), and significantly improved postural performance (.05 > p > .0007). CONCLUSIONS: Patients with dizziness of suspected cervical origin are characterized by impaired postural performance. Physiotherapy reduces neck pain and dizziness and improves postural performance. Neck disorders should be considered when assessing patients complaining of dizziness, but alternative diagnoses are common.     

Service life planning and performance requirements

Service life planning comprises a model for the determination of a reasonable expected service life for buildings and components, and it establishes a routine for the assessment of design alternatives. A design option is considered reasonable when it meets or exceeds performance requirements over time that have been drawn up specifically for the specific project. Due to this assessment reference, there is a very evident link to the concept of performance-based building. Any stakeholder involved in the value chain or in the design process of the building, as well as regulators and building users, can express performance requirements. Identified requirements, both in relevance and in quality, will vary with the stakeholder and his/her perspective of interest. As building sector manufacturers develop most products with reference to standards rather than with reference to specific requirements, there is no direct link from user requirements to the product design. Instead, the building designer has the responsibility to ensure performance requirements are met by the performance of products integrated into the design. As these design decisions also have to be made at the material and component level, a performance-based building would benefit from an established rationale that enables the communication of performance requirements across the relevant system levels in the relevant design processes. A path for the connection of the established concepts of service life planning and performance-based building is presented. The aim is to identify key elements that need to be developed for the successful linkage of performance-based building with service life planning.     

Dynamics of lung collapse and recruitment during prolonged breathing in porcine lung injury

Oleic acid (OA) injection, lung lavage, and endotoxin infusion are three commonly used methods to induce experimental lung injury. The dynamics of lung collapse and recruitment in these models have not been studied, although knowledge of this is desirable to establish ventilatory techniques that keep the lungs open. We measured lung density by computed tomography during breath-holding procedures. Lung injury was induced with OA, lung lavage, or endotoxin in groups of six mechanically ventilated pigs. After a stabilization period, repetitive computed tomography scans of the same slice were obtained during prolonged expirations with and without positive end-expiratory pressure and during prolonged inspirations after 5 and 30 s of expiration. Lung collapse and recruitment occurred mainly within the first 4 s of breath-holding procedures in all three lung injury models, and some collapse and recruitment occurred even within 0.6 s. OA-injured lungs were significantly more unstable than lungs injured by bronchoalveolar lavage or endotoxin infusion. In this experimental setting, expiration times <0.6 s are required to avoid cyclic alveolar collapse during mechanical ventilation without extrinsic positive end-expiratory pressure.     

Mycoplasma hyorhinis infection of pigs selectively bred for high and low immune response

Fourier transform infrared microspectroscopy (FTIR) was used to study glasses of pure carbohydrates and in the cytoplasm of desiccation tolerant plant organs. The position of the OH stretching vibration band (vOH) shifted with temperature. Two linear regression lines were observed in vOH against temperature plots. The temperature at the point of intersection between these two lines coincided with the glass transition temperature (Tg), as determined by other methods. The temperature at the intersection point decreased with increasing water content, which further validates that, indeed, Tg was observed. Tg values that were determined for dry glucose, sucrose, maltose, trehalose and raffinose glasses were 27, 57, 91, 108 and 108 degrees C, respectively. The shift of vOH with temperature, the wavenumber-temperature coefficient (WTC), was higher in sugar glasses having higher Tg. This suggests that glasses are more loosely packed when they have higher Tg. For Typha latifolia pollen and dried Craterostigma plantagineum leaves we obtained similar vOH vs. temperature plots as for carbohydrate glasses, indicating that a glass transition was observed. The Tg in dry pollen was ca. 45 degrees C and in dry plant leaves ca. 65 degrees C, with WTC values comparable to those observed in the carbohydrates. The Tg values in these tissues decreased with increasing water contents. Our data suggest that the carbohydrates that are present in the cytoplasm are primary factors contributing to the glassy state. We conclude that FTIR provides new insights in the structure of glasses in carbohydrates and in biological tissues.     

Decision making with a fuzzy ontology

Knowledge mobilisation is a transition from the prevailing knowledge management technology that has been widely used in industry for the last 20?years to a new methodology and some innovative methods for knowledge representation, formation and development and for knowledge retrieval and distribution. Knowledge mobilisation aims at coming to terms with some of the problems of knowledge management and at the same time to introduce new theory, new methods and new technology. More precisely, this paper presents an outline of a fuzzy ontology as an enhanced version of classical ontology and demonstrates some advantages for practical decision making. We show that a number of soft computing techniques, e.g. aggregation functions and interval valued fuzzy numbers, will support effective and practical decision making on the basis of the fuzzy ontology. We demonstrate the knowledge mobilisation methods with the construction of a support system for finding the best available wine for a number of wine drinking occasions using a fuzzy wine ontology and fuzzy reasoning methods; the support system has been implemented for a Nokia N900 smart phone.