Development of low-alcohol isotonic beer by interrupted fermentation

Alcohol-free beer with isotonic properties is getting more popular and its production can be carried out by different production strategies; however, interrupted fermentation is still a challenge. Therefore, the objective of this study was to develop a low-alcohol isotonic beer (<0.5% v/v) by interrupted fermentation. Moreover, the major objective is to compare the developed product to commercial beverages (sports drinks, ‘Pilsen' regular beer, alcohol-free beers and low-alcohol isotonic beer). The beverages were evaluated based on pH, alcohol content (% v/v), total titratable acidity (mEq L⁻¹), osmolality (mOsmol kg⁻¹), bitterness International Bitterness Units, colour European Brewery Convention, total phenolic compounds (mg L⁻¹ gallic acid), reducing and total sugars (%) and Na and K contents (mg L⁻¹). The developed low-alcohol isotonic beer presented characteristics similar to sports drinks, with the advantage of being richer in phenolic compounds and suitable osmolality. Despite salts were added in its formulation, the grades attributed to all beers employed in the sensory evaluation, as well as the purchase intention did not present significant differences.     

The effect of a solid additive on rolling fatigue life

Behaviour of a series of lubricant oils and the effect of a non stoichiometric inorganic compound, as solid extreme pressure additive, on rolling fatigue life are studied using the rolling four-ball accelerated service simulation test proposed by Barwell and Scott. The results show, in all tested cases, the remarkable efficacy of this type of additive. The Total Acidity Number (tan) was found to increase with performance time for the case of the base lubricant, while for the oils with additives, it remained at its constant low value. This led to a proposal of a possible mechanism of the additive performance in the rolling process.     

Nanocrystalline TiO2 photosensitized with natural polymers with enhanced efficiency from 400 to 600 nm

TiO₂ sensitization for solar applications requires not only efficient but also stable and inexpensive sensitizers. Different condensed tannins extracted from bark wastes of tropical wood trees were studied as possible sensitizers of TiO₂. These natural polymers adhere strongly to the TiO₂ even from aqueous solutions. Absorption spectra are presented for 1 mM aqueous sensitizing solutions prepared with lyophilized condensed tannins which absorb light in the visible range. Spectral photocurrent measurements and I–V characterization show that no bias is required for electron injection to the TiO₂ from all studied condensed tannins. Incident photon to current efficiency (IPCE) analysis indicates that surface complexation originates absorption bands with different electron injection efficiencies. These play a dominant role in determining IPCE spectral shape. We propose that surface modification by the sensitizer changes the surface trap density, thereby decreasing recombination losses.     

Swoop: A Web Ontology Editing Browser

In this paper, we describe Swoop, a hypermedia inspired Ontology Browser and Editor based on OWL, the recently standardized Web-oriented ontology language. After discussing the design rationale and architecture of Swoop, we focus mainly on its features, using illustrative examples to highlight its use. We demonstrate that with its Web-metaphor, adherence to OWL recommendations and key unique features, such as Collaborative Annotation using Annotea, Swoop acts as a useful and efficient Web Ontology development tool. We conclude with a list of future plans for Swoop, that should further increase its overall appeal and accessibility.     

The importance of choosing attractors for optimizing chaotic communications

In this brief, we consider methods to improve the performance of chaotic communication schemes. We study a system using a receiver which explicitly includes the presence of noise in the channel. We show how the choice of chaotic dynamical system generating the transmitted signal is crucial. We observe a large variation in bit error rate performance of the system as parameters in the maps are changed, and we propose a simple explanation for this variation.     

The kinetics of gasification of carbon deposited on nickel catalysts

The kinetics of gasification of carbon deposited on nickel foils and nickel-alumina catalysts by steam, carbon dioxide and hydrogen are reported for the temperature range 450–850°C. At atmospheric pressure steam is the most effective gasifying agent. In all cases, the kinetic data obtained at lower temperatures (below 600°C) is consistent with control of the process by the chemical reaction. As the temperature increases, the rates of gasification by steam and carbon dioxide are limited by mass transfer effects. The concentration of methane near reaction sites affects the rate of hydrogen gasification above 650°C.     

A Complete and Highly Effective Mothproofing Agent Comprising a Pyrethroid and a Hexahydropyrimidine

Pyrethroids, considered as a general class of compounds, have been shown to provide effective protection from the larvae of the keratin-digesting insects Tineola bisselliella H., Tinea pellionella Linn., Hofmannophila pseudo-spretella Station and Attagenus piceus Oliv. The position regarding the susceptibility of the furniture carpet beetle to pyrethroids is less clear, however. It has been reported that both deltamethrin and permethrin are effective against Anthrenus flavipes Le Conte, whilst permethrin is also reported elsewhere to be effective against the same species. Results obtained in our laboratory, however, have indicated that pyrethroids may offer inadequate protection against Anthrenus vorax Waterh. [1, 2]. This latter species is identical to Anthrenus flavipes var. seminiveus Casey, a colour variety of Anthrenus flavipes Le Conte. The 1,3-disubstituted5-phenylcarbamoyl-2,4,6-trioxo- and 4,6-dioxo-2-thione-hexahydropyrimidine derivatives described in this paper exhibit a surprisingly high and selective toxicity to the Anthrenus species. Thus, a combination of an appropriate hexahydropyrimidine with a suitable pyrethroid, e.g. permethrin, provides complete control of a wide range of commonly encountered textile insect pests. The influence of substituents on the mothproofing activity is discussed.     

A porosimetric study of calcium sulfoaluminate cement pastes cured at early ages

Calcium sulfoaluminate and Portland cement pastes, both prepared with a water/solid mass ratio equal to 0.5 and cured for time periods comprised between 2 h and 28 days, show completely different pore size distributions by mercury intrusion. Portland cement pastes aged at 12 h and 1 day exhibit a unimodal distribution of pore sizes related to a continuous network of capillary pores with a threshold pore radius decreasing from nearly 650 to 350 nm. After 7 and 28 days of curing, this parameter shifts to about 150 nm and a region having smaller pores appears (with a second threshold pore radius roughly comprised between 10 and 30 nm), made discontinuous by blockages of hydration products which occlude the interconnected pore system and isolate the interior space. For calcium sulfoaluminate cement pastes, a bimodal distribution is rapidly established, in which the regions with a lower porosity (threshold pore radii up to about 25 nm) are dominant, while the decrease of total porosity almost ceases at later ages. The porosimetric behaviour of calcium sulfoaluminate-based cement is related to its very fast hydration rate and to the lack of water needed to continue the hydration reactions.     

The metabolism of 1-acyl-PAF in rabbit platelets and its possible interaction with PAF

The metabolism of 1-acyl-2-acetyl-sn-glycero-3-phosphocholine (1-acyl-PAF), a naturally occurring analogue of platelet activating factor (PAF), was investigated in rabbit platelets. Our studies showed that 1-acyl-[³H]PAF (1-palmitoyl-2-acetyl-sn-glycero-3-phospho[N-methyl-³H]-choline) was converted by platelets into phosphatidyl-[³H]choline ([³H]PC) in a time-dependent fashion. The formation of [³H]PC occurred at a rate similar to that observed when lyso-[³H]PC (palmitoyl-sn-glycero-3-phospho[N-methyl-³H]choline) was used as substrate. In addition, a time-dependent increase in the level of water-soluble radioactivity was observed during the incubation of platelets with either 1-acyl-[³H]PAF or lyso-[³H]PC. This increase was parallel to the formation of [³H]PC and was not observed in the presence of [¹⁴C]PAF (1-octadecyl-2-acetyl-sn-glycerol-3-phospho[N methyl-¹⁴C]choline). Analysis by thin-layer chromatography showed that the soluble radioactivity was mainly associated with glycerophosphocholine (GPC). On the other hand, the preincubation of platelets with phenylmethylsulfonyl fluoride, an inhibitor of the acetylhydrolase, reduced the hydrolysis of 1-acyl-[³H]PAF to [³H]GPC with a concomitant accumulation of radioactivity in 1-acyl-PAF. These findings suggest that 1-acyl-PAF is converted into PC through deacetylation-reacylation with lysoPC as an obligatory intermediate. The findings also indicate that the lysoPC resulting from 1-acyl-PAF is either reacylated to phosphatidylcholine (PC) or hydrolyzed to GPC by lysophospholipase. Finally, we showed that the stimulation of platelets with PAF led to a time- and concentration-dependent increase in the conversion of 1-acyl-[³H]PAF to [³H]PC. The stimulatory effect of PAF was not observed when platelets were lysed before incubation, suggesting that PAF enhances the metabolism of 1-acyl-PAF, probably by accelerating its translocation through the plasma membrane.