Study of hot air generator with quasi-uniform temperature using concentrated solar radiation: Influence of the shape parameters

The non-uniformity of the air temperatures and the slow flow rate at the plane collector exit constitute the main cause of the limitations of the solar drying systems. In order to obtain an uniform and a variable flow rate for different uses, a hot air generator using concentrated solar radiation is proposed. To improve the thermal efficiency of the generator, a study of the influence of different shape parameters is realized. The generator is simulated in the laboratory while investigating the flow induced by a circular disc heated uniformly by Joule effect at constant temperature. This disc is placed at the entrance of an open ended vertical cylinder of a larger diameter. Thermal radiation emitted by the hot disc heats the cylinder wall. The heating of the fluid at the cylinder-inlet generates a thermosiphon flow around the one created by the hot disc. The comparison of the velocity and the temperature profiles of the resulting flow permits to determine the influence of the cylinder height, the vertical source-cylinder spacing and the radius ratio, on the resulting flow at the system exit. Thus, a judicious choice of the shape parameters entails an improvement of the flow rate as well as the thermal flux absorbed by the air and a good homogenization of the air temperature at the generator exit.     

Knowledge Diffusion of the Internet of Things (IoT): A Main Path Analysis

Wireless Personal Communications - The Internet of Things (IoT) is a concept that has attracted significant attention since the emergence of wireless technology. The knowledge diffusion of IoT...     

Fault and attack management in all-optical networks

Network management for optical networks faces additional security challenges that arise by using transparent optical network components in communication systems. While some available management mechanisms are applicable to different types of network architectures, many of these are not adequate for all-optical networks. These have unique features and requirements in terms of security and quality of service, thus requiring a much more targeted approach in terms of network management. In this article we consider management issues with particular emphasis on complications that arise due to the unique characteristics and peculiar behaviors of transparent network components. In particular, signal quality monitoring is still a major complication in all-optical networks. Despite new methods for detection and localization of attacks having been proposed, no robust standards or techniques exist to date for guaranteeing the quality of service in these networks. Therefore, sophisticated mechanisms that assist in managing and assessing the proper function of transparent network components are highly desirable. Accordingly, we present an algorithm for multiple attack localization and identification that can participate in some tasks for fault management of all-optical networks     

Surface damage of poly(methylmethacrylate) under fretting loading

The initial fretting damage in a glass/PMMA contact was investigated by means of experiments and numerical (F.E.M.) simulations. Both micro-crack nucleation at the contact edges and particle detachment were identified on the PMMA's surface. Micro-crack initiation was related to the combination of high tensile stresses and positive hydrostatic pressures which are known to enhance crazing. During the early stages of the fretting tests, the distribution of the detached particles within the contact was correlated to the spatial distribution of the cumulative interfacial energy dissipated by friction. As the number of cycles was increased, it was observed that detached particles moved toward the middle of the contact. On the basis of FEM simulations, this particle displacement within the contact was attributed to the existence of differential micro-displacements during the fretting cycle.     

Production of hot air with quasi uniform temperature using concentrated solar radiation

The design of a hot air solar generator for different uses has been simulated while investigating the flow induced by a hot disc placed at the entrance of the open ended vertical cylinder. Ambient air (Pr = 0.7) enters the bottom of the cylinder with constant velocity and temperature, and flows up through the cylinder as a result of natural convection. The cylindrical wall is heated by thermal radiation emitted by the disc. The pressure drop due to acceleration of the flow to the cylinder-inlet causes the appearance of thermosyphon effect around the thermal plume. At the top part of the cylinder, the flow exploration shows the full development of the turbulence and the uniformity of thermal and hydrodynamic fields. The study of the thermal spectral density indicates that the turbulent structures seem to be sufficiently small not to be sensitive to viscosity, but large enough to be sensitive to Archimedes effects.     

Phase structure and mechanical properties of PP/EPR/CaCO3 nanocomposites: Effect of particle's size and treatment

Calcium carbonate (CaCO₃) reinforced polypropylene/ethylene propylene rubber (PP/EPR) copolymer composites for automotive use were developed by means of extrusion and injection molding process. Three kinds of CaCO₃ (stearic acid treated and untreated) nanoparticles and microparticles were used as fillers. The influence of stearic acid, particle size, and filler content on the state distribution and morphology were investigated by SEM and rheological measurements. Two different morphologies were observed: EPR and CaCO₃ dispersed in the PP matrix and a core shell structure, depending on the interactions between EPR and CaCO₃. Toughening mechanisms and mechanical properties of the different systems were investigated. Significant improvement in tensile modulus is observed in all composites, depending on filler content. Elongation and notched impact strength were drastically decreased, especially for composites with nano CaCO₃. Better impact properties were obtained with low content of treated particles, showing the importance of filler treatment. POLYM. ENG. SCI., 55:2859–2868, 2015. © 2015 Society of Plastics Engineers     

LC/ESI-MS/MS characterisation of procyanidins and propelargonidins responsible for the strong antioxidant activity of the edible halophyte Mesembryanthemum edule L.

Mesembryanthemum edule is used as a food ingredient and in traditional medicine. In this study, we investigated antioxidant activities of several extracts (methanol/acidified water, v/v: 20/80; 40/60 and 60/40) obtained from M. edule leaf, stem and root. Then, individual phenolics were characterised by reverse-phase HPLC coupled to electrospray ionisation mass spectrometry and multi-stage MS fragment analysis. Results showed that 40% methanol leaf extract, 40% methanol root extract and 20% methanol stem extract displayed the highest scavenging activity against DPPH and ABTS radicals. Regarding LC/ESI-MS/MS identification of active phenols, there were significant differences among the fractions of interest. In fact, 40% leaf extract mainly contained procyanidins, whereas propelargonidins were the major phenolics in 20% methanol stem extract, while, in 40% root extract, the active compounds remained unidentified. These results indicate that edible M. edule can be used as a nutraceutical in the pharmaceutical industry.     

Multi-allergen screening immunoassay for the detection of protein markers of peanut and four tree nuts in chocolate

A multiresidue enzyme immunoassay was developed to check for the presence of markers of peanut, hazelnut, almond, cashew and Brazil nuts in a single run. The assay was designed under the competitive indirect format and adapted for screening purposes applied to chocolate samples. The limit of detection for this assay was below 1 µg g^-1 protein for each allergenic food. In most cases, the high specificity of the antibodies used allowed the identification of each particular allergenic food with no possible confusion. This assay was proven to be useful as part of an analytical procedure involving the identification of the unknown allergenic food among peanut and other tree nuts in recalled samples before the application of a quantitative technique to determine the level of cross-contamination.     

Positively equicontinuous flows

Let G be a positively equicontinuous flow of homeomorphisms of a locally compact metric space E. We show how the dynamics of such a flow are rich. We study when regularly almost periodic elements in G are periodic and we describe orbits and their limit sets. In particular, we show that the limit set L(G?) of G is a closed subset on which G is equicontinuous and that if G moreover has closed orbits, then any w-limit set is a periodic orbit.     

Municipal solid waste compost application improves productivity, polyphenol content, and antioxidant capacity of Mesembryanthemum edule

Organic wastes were successfully used as soil amendment to improve agrosystems productivity. Yet, the effectiveness of this practice to enhance plant antioxidant capacities has received little attention. Here, we assess the effect of municipal solid waste (MSW) compost (at 40 t ha(-1)) on growth, polyphenol contents and antioxidant activities of Mesembryanthemum edule. MSW compost application significantly increased the soil contents of carbon, nitrogen, calcium, phosphorus and potassium. This was associated with higher nutrient (N, P, and K) uptake, which likely led to the significant improvement of the plant biomass and relative growth rate (RGR) (+93% on average) as compared to the control. In the same way, the fertilizing effect of the added organic matter significantly enhanced the antioxidant potential M. edule, assessed by radical scavenging activity, iron reducing power and β-carotene bleaching capacity. This was associated with significantly higher antioxidant contents, mainly total phenols and flavonoids. Heavy metal (Pb, Cd, Cu, and Zn) concentrations were slightly increased upon compost application, but remained lower than phytotoxic values. Overall, our results point out that short-term MSW compost application at 40 t ha(-1) is efficient in enhancing the productivity together with the antioxidant potentiality of M. edule without any adverse environmental impact.