Microsystem Technologies - The purpose of the present enquiry is to analyse the mechanics of an incompressible fluid, with water as base fluid, through a radially symmetric plumb duct with... 相似文献
The dead-end filtration characteristics of the dimorphic yeast Kluyveromyces marxianus var. marxianus (formerly fragilis) NRRLy2415 were investigated for a range of mean cell morphologies, ranging from predominantly yeast-like to predominantly filamentous. Semiautomated image analysis was used to measure the mean cell specific surface area, Sv, and the mean ratio of cell length to equivalent cylindrical diameter, Ldm, in each broth. The method of Ju and Ho (Biotechnol. Bioeng. 1988, 32, 95-99) was used to show that for broths with Ldm values between 1.72 and 10.03, the voidage of cell pellets formed by centrifugation increased with increasing Ldm. In the pressure range 30-180 kPa, the specific filter cake resistance, alpha, was found to be related to pressure, DeltaP, through the equation alpha = alpha0(1 + kcDeltaP). The dependence of alpha0/Sv2 on Ldm was found to be qualitatively consistent with the pellet voidage data and the Carman-Kozeny equation. Considerably better agreement with the experimental data was obtained when the Kozeny constant, K, was treated as variable and related to Ldm through the equation K = 4.83 + 7.08 log10 Ldm. The cake compressibility constant, kc, was found to increase with increasing Ldm, a phenomenon consistent with the wide range of voidages that can be displayed by beds of long cylinders. 相似文献
Residual electrical resistivity due to short-range order has been calculated for Cu100-xAlx (x=9.13,13.56, 14.5 and 14.76 in at pct) alloys using pseudopotential approach, and the results have been discussed in the light of experimental studies of the local-order structure of these alloys. In case of Cu85.5Al14.5, change in the total residual electrical resistivity due to neutron-irradiation effects has been estimated by including contributions from the short-range order and static atomic displacement correction. Our results show a decrease in the residual resistivity in the irradiated Cu-Al solid solution as compared to the unirradiated sample. This is in accordance with the experimental results 相似文献
This paper describes an approach, conceptual framework, and software architecture for dynamic reconfiguration of the order picking system. The research and development project was sponsored by the Material Handling Research Center (MHRC), a National Science Foundation sponsored Cooperative Industry/University Research Center. The storage configuration is assumed to be an in-the-aisle order picking system in which stockkeeping units (SKUs) can occupy variable capacity storage locations and stock-splitting is allowed among zones (clusters). The product mix may include multiple product families with different life cycles, correlated demand within families and commonality of demand across families. 相似文献
A special boundary integral method developed for two-dimensional regions containing circular holes is used to calculate temperature and heat transfer on the boundaries of several selected regions. The geometrical configuration of the region is arbitrary and convective boundary conditions are assumed. An important feature of the method is analytic representation of temperature and its normal derivative on the interior circular holes in the form of a harmonic series. This makes the application of the boundary integral method convenient and free from conditioning problems associated with small interior boundaries. Heat transfer from circular isothermal interior holes are calculated for several illustrative examples using three terms of the harmonic series representation for heat transfer at each of the circular boundaries. The results are presented and discussed. 相似文献
This paper describes the design and development of a precision calliper system to measure the surface profile of an outboard
marine engine propeller blade. Several instruments that are commonly used for measuring the surface profile of a propeller
blade are reviewed in this paper. These include the pitch meter, the profilometer and the computer numerical control coordinate-measuring
machine (CNC-CMM). However, the operating practices and availability of different facilities in industry necessitate a more
cost-effective approach. An alternative method using a precision calliper system is therefore proposed. Details of the design
criteria, principles of operation and the testing and verification of the system are presented. The paper concludes that the
precision calliper system is a cost-effective method for measuring the surface profile of a propeller. 相似文献
The paper proposes a novel metaheuristic based on integrating chaotic maps into a Henry gas solubility optimization algorithm (HGSO). The new algorithm is named chaotic Henry gas solubility optimization (CHGSO). The hybridization is aimed at enhancement of the convergence rate of the original Henry gas solubility optimizer for solving real-life engineering optimization problems. This hybridization provides a problem-independent optimization algorithm. The CHGSO performance is evaluated using various conventional constrained optimization problems, e.g., a welded beam problem and a cantilever beam problem. The performance of the CHGSO is investigated using both the manufacturing and diaphragm spring design problems taken from the automotive industry. The results obtained from using CHGSO for solving the various constrained test problems are compared with a number of established and newly invented metaheuristics, including an artificial bee colony algorithm, an ant colony algorithm, a cuckoo search algorithm, a salp swarm optimization algorithm, a grasshopper optimization algorithm, a mine blast algorithm, an ant lion optimizer, a gravitational search algorithm, a multi-verse optimizer, a Harris hawks optimization algorithm, and the original Henry gas solubility optimization algorithm. The results indicate that with selecting an appropriate chaotic map, the CHGSO is a robust optimization approach for obtaining the optimal variables in mechanical design and manufacturing optimization problems.
Isothermal sections of the Ni-Cr-Al-W system have been investigated at 75 at % Ni and temperatures of 1523 and 1273 K, by means of phase compositional analysis, X-ray diffraction and microscopical examination. The alloys studied lay in the range 2.5 to 10 at % Cr, 12.5 to 20 at% Al, 2.5 to 6.25 at % W, The phases formed were, and the bcc solid solution based on tungsten (designated
2). The maximum extent of the region was found to be 3 at % each of chromium and tungsten. Preferential partitioning of tungsten to occurred. Study of an Ni-10Cr-12.5Al-2.5W alloy aged at 1273 and 1073 K, after quenching from 1573 K, showed that changes in and compositions and lattice parameters occur as a function of ageing time. 相似文献
Finite-time stability in dynamical systems theory involves systems whose trajectories converge to an equilibrium state in finite time. In this paper, we use the notion of finite-time stability to apply it to the problem of coordinated motion in multiagent systems. Specifically, we consider a group of agents described by fully actuated Euler–Lagrange dynamics along with a leader agent with an objective to reach and maintain a desired formation characterized by steady-state distances between the neighboring agents in finite time. We use graph theoretic notions to characterize communication topology in the network determined by the information flow directions and captured by the graph Laplacian matrix. Furthermore, using sliding mode control approach, we design decentralized control inputs for individual agents that use only data from the neighboring agents which directly communicate their state information to the current agent in order to drive the current agent to the desired steady state. Sliding mode control is known to drive the system states to the sliding surface in finite time. The key feature of our approach is in the design of non-smooth sliding surfaces such that, while on the sliding surface, the error states converge to the origin in finite time, thus ensuring finite-time coordination among the agents in the network. In addition, we discuss the case of switching communication topologies in multiagent systems. Finally, we show the efficacy of our theoretical results using an example of a multiagent system involving planar double integrator agents. 相似文献