基于全U网络的混凝土路面裂缝检测算法

针对现有的混凝土裂缝检测算法在各种复杂环境中检测精度不够、鲁棒性不强的问题,根据深度学习理论和U-net模型,提出一种全U型网络的裂缝检测算法。首先,依照原U-net模型路线构建网络;然后,在每个池化层后都进行一次上采样,恢复其在池化层之前的特征图规格,并将其与池化之前的卷积层进行融合,将融合之后的特征图作为新的融合层与原U-net网络上采样之后的网络层进行融合;最后,为了验证算法的有效性,在测试集中进行实验。结果表明,所提算法的平均精确率可达到83.48%,召回率为85.08%,F1为84.11%,相较于原U-net分别提升了1.48%,4.68%和3.29%,在复杂环境中也能提取完整裂缝,保证了裂缝检测的鲁棒性。     

Feasibility study of large-scale mass customization 3D printing framework system with a case study on Nanjing Happy Valley East Gate

At present, the development and implementation of digital transformation are the keys to promoting high-quality industry development. The new digital fabrication method of robotic 3D printing is a research area being studied by many to tackle the issue of the declining productivity of traditional construction methods. Although many studies have been done, most of the current 3D printing projects are facing limitations in terms of scale. In order to bridge the gap, this article proposed a mass customization 3D printing framework system for large-scale projects. This article discusses how mass customization is made possible through the joint operation of the FUROBOT software and 3D printing hardware. By taking the east gate of Nanjing Happy Valley Plaza as a case study, the article demonstrates and studies the feasibility of the large-scale mass customization 3D printing framework system.     

铌硅基高温合金定向凝固铸造温度场模拟计算

以铌硅基高温合金定向凝固铸造过程为对象，通过实验测试和反求法确定了铌硅基高温合金和型壳的热物性参数，以及凝固过程各界面换热系数等边界条件；利用ProCAST软件对不同抽拉速率下铌硅基高温合金凝固过程温度场进行了模拟。结果表明，随着抽拉速率由5 mm·min?1增加到10 mm·min?1，固/液界面离液态金属锡表面的距离由12.1 mm下降到8.2 mm；平均糊状区宽度逐渐变窄，由11.5 mm减小到10.4 mm。针对抽拉速率为5 mm·min?1的实验结果表明，数值模拟结果与实际定向凝固实验获得的一次枝晶间距差异在6%以内，从一个方面验证了温度场模拟结果的正确性，相关结果可为铌硅基高温合金叶片定向凝固铸造参数的确定提供参考。      

安家岭露天矿南帮边坡不稳定区域防治措施

安家岭露天矿通过开展边坡年度稳定性评价工作,对稳定性不足区域提出治理措施,并结合下1年度生产计划对采矿方案进行调整。安家岭露天矿采矿主要调整南帮逆断层影响区域,通过提前掏槽开采—快速内排压脚,使逆断层影响区域满足边坡安全;快速内排压脚后并对原运煤系统进行了调整,可以有效缩短运煤路线,在保证安全基础上取得可观的经济效益。     

Amination of biochar surface from watermelon peel for toxic chromium removal enhancement

Watermelon peel residues were used to produce a new biochar by dehydration method. The new biochar has undergone two methods of chemical modification and the effect of this chemical modification on its ability to adsorb Cr(VI) ions from aqueous solution has been investigated. Three biochars, Melon-B, Melon-BO-NH_2 and Melon-BO-TETA, were made from watermelon peel via dehydration with 50% sulfuric acid to give Melon-B followed by oxidation with ozone and amination using ammonium hydroxide to give Melon-BO-NH_2 or Triethylenetetramine(TETA) to give Melon-BO-TETA. The prepared biochars were characterized by BET, BJH,SEM, FT-IR, TGA, DSC and EDAX analyses. The highest removal percentage of Cr(VI) ions was 69% for Melon-B,98% for Melon-BO-NH_2 and 99% for Melon-BO-TETA biochars of 100 mg·L~(-1) Cr(VI) ions initial concentration and 1.0 g·L~(-1) adsorbents dose. The unmodified biochar(Melon-B) and modified biochars(Melon-BO-NH_2 and Melon-BO-TETA) had maximum adsorption capacities(Qm) of 72.46, 123.46, and 333.33 mg·g~(-1), respectively.The amination of biochar reduced the pore size of modified biochar, whereas the surface area was enhanced.The obtained data of isotherm models were tested using different error function equations. The Freundlich,Tempkin and Langmuir isotherm models were best fitted to the experimental data of Melon-B, Melon-BO-NH_2 and Melon-BO-TETA, respectively. The adsorption rate was primarily controlled by pseudo-second–order rate model. Conclusively, the functional groups interactions are important for adsorption mechanisms and expected to control the adsorption process. The adsorption for the Melon-B, Melon-BO-NH_2 and Melon-BO-TETA could be explained for acid–base interaction and hydrogen bonding interaction.     

前混合磨料射流锚杆拆除装置设计

介绍锚杆应用及常用的拆锚方法,针对现有前混合磨料射流退锚装置存在锚杆拆卸时间长、工人作业环境差、装置部件锈蚀维护性差等问题,提出了一种前混合磨料射流退锚改进装置,并进行现场试验,结果表明,所改进设计装置具有退锚时间短、对工人伤害小、操作简便、部件维护周期长和无需专门配备泵站等特点,对进一步提高锚杆拆除效率具有重要参考价值。     

Nickel phosphonate MOF as efficient water splitting photocatalyst

A novel microporous two-dimensional(2D)Ni-based phosphonate metal-organic framework(MOF;denoted as IEF-13)has been successfully synthesized by a simple and green hydrothermal method and fully characterized using a combination of experimental and computational techniques.Structure resolution by single-crystal X-ray diffraction reveals that IEF-13 crystallizes in the triclinic space group Pi having bi-octahedra nickel nodes and a photo/electroactive tritopic phosphonate ligand.Remarkably,this material exhibits coordinatively unsaturated nickel(II)sites,free-P0₃H₂and-P0₃H acidic groups,a C0₂accessible microporosity,and an exceptional thermal and chemical stability.Further,its in-deep optoelectronic characterization evidences a photoresponse suitable for photocatalysis.In this sense,the photocatalytic activity for challenging H₂generation and overall water splitting in absence of any co-catalyst using UV-Vis irradiation and simulated sunlight has been evaluated,constituting the first report for a phosphonate-MOF photocatalyst.IEF-13 is able to produce up to 2,200 fimol of H₂per gram using methanol as sacrificial agent,exhibiting stability,maintaining its crystal structure and allowing its recycling.Even more,170μmol of H₂per gram were produced using IEF-13 as photocatalyst in the absence of any co-catalyst for the overall water splitting,being this reaction limited by the 0₂reduction.The present work opens new avenues for further optimization of the photocatalytic activity in this type of multifunctional materials.     

可控源时域电磁剖面成像方法与应用

为了提高可控源时域电磁成像方法的分辨能力,实现对油气储层的有效识别,在多道瞬变电磁法的研究基础上,开展可控源时域电磁剖面成像方法与实际应用研究,以期提高视电阻率成像的稳定性与可靠性,解决油气储层与油水分界面识别难题。首先,以瞬变电磁场扩散理论为基础,将阶跃电流激发条件下得到的电场响应做微分运算,得到电场分量二次场波峰幅值与其走时的对应关系,定义了该方法视电阻率计算公式及其成像方法;其次,确立了该方法的野外资料采集方式,即保持地面观测点不动,依次移动发射源,将采集到的数据进行归一化处理,结合视电阻率成像方法,获取地下地质构造视电阻率剖面;最后,利用该成像方法对大庆宋芳屯油田可控源时域电磁法试验资料进行了处理,获取了试验区视电阻率拟断面图。结果表明,通过与试验区测井资料及瞬变电磁二维反演电阻率剖面对比认为,该方法成像简单快速,降低了反演的非唯一性,增强了资料解释的可靠性,成像结果具有良好的地质效果。     

Omega-6支撑身体，Omega-3支撑大脑：均衡摄入对儿童大脑发育的影响（网络首发、推荐阅读）

人体大脑和身体的发育，需要从食物中摄取均衡的营养物质。人类大脑是区分人类和其他动物的特征。食物中的必需脂肪酸是机体组织结构和功能的必要组成部分。Omega-6（O6）亚油酸（LA6）是皮肤组织的组成成分，且是炎症、血栓形成、免疫和其他信号分子的前体；Omega-3（O3）α-亚麻酸（ALA3），特别是其长链代谢产物——二十二碳六烯酸（DHA3），是大脑、视网膜和部分神经组织中的关键组分。从富含LA6脂肪酸（缺乏O3脂肪酸）的植物籽中提取出的廉价而优质油脂，是20世纪的西方国家食品工业生产的主要脂肪来源。在代谢通路中，高浓度的LA6脂肪酸可拮抗O3脂肪酸代谢，造成O3脂肪酸不足，因此，在给怀孕动物的饲料中，只提供富含LA6但缺乏O3脂肪酸的油脂作为唯一的脂肪来源，会导致幼崽大脑发育不良。过去20~30年的研究表明，低含量LA6且含DHA3的油脂可改善大脑的功能。近年来的研究较多集中在营养因素对大脑发育的影响，最新研究数据表明，脂肪酸平衡对营养不良儿童的大脑发育尤为重要。世界卫生组织（WHO）越来越重视大脑的营养健康，通过其下属的食品法典委员会，建议用于治疗严重急性营养不良儿童的即食治疗食品中，使用含有均衡脂肪酸组成/构成的脂肪。同样，脂肪酸均衡对老年人可能也很重要。目前，业界已经有了调整油脂成分的方法，以确保脂肪酸均衡，从而维持人体整个生命周期的大脑健康。