A new smart smudge attack using CNN

International Journal of Information Security - This paper deals with a well-known problem in the area of the smudge attacks: when a user draws a pattern to unlock the pattern lock on a smartphone...     

Annular‐ring slot antenna designs with circular polarization radiation

The design of a microstrip‐fed annular‐ring slot antenna (ARSA) with circular polarization (CP) radiation is initially studied. To obtain CP radiation with broad 3‐dB axial ratio (AR) bandwidth that can cover the WiMAX 2.3 GHz (2305–2320 MHz, 2345–2360 MHz) and WLAN 2.4 GHz (2400–2480 MHz) bands, a novel technique of extending an inverted L‐shaped slot from the bottom section of the annular‐ring is proposed. To suppress the harmonic modes induced by the CP ARSA, the technique of integrating a defected ground structure into the annular‐ring slot is further introduced. From the measured results, 10‐dB impedance bandwidth and 3‐dB AR bandwidth of 44.86 and 9.68% were achieved by the proposed harmonic suppressed CP ARSA. Furthermore, average gain and radiation efficiency of ～4.7 dBic and 71%, respectively, were also exhibited across the bands of interest. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:337–345, 2015.     

Broadly wavelength-tunable external cavity lasers with extremely low power variation over tuning range

Tunable external-cavity lasers with low power variation over a broad tuning range are demonstrated using asymmetric multiple quantum-wells with a wide and flat gain. For a 2.8-/spl mu/m-wide ridge waveguide laser of cavity length 380 /spl mu/m, when used in a grating external cavity and with an antireflection coating on one facet of laser diode chip, the power variation of less than -1 dB is obtained over a range of 80 nm. This extremely low power variation is a direct result of the spectrally flat gain.     

Off-Site Exposure to Respirable Aerosols Produced during the Disk-Incorporation of Class B Biosolids

Field experiments were conducted at a Class B biosolids land application site in central Arizona to measure, model, and source-track the off-site transport of aerosols emitted when biosolids were disk-incorporated into soils. Real-time PM10 monitoring provided time-resolved aerosol information sufficient for verifying both off-site concentration and off-site exposure time model results. Under the conditions considered and at a distance of 165?m from the aerosol source, biosolids disk-incorporation resulted in an intermittent exposure to biosolids-derived aerosol concentration between 15 and 40?μg/m3 and an inhalable biosolids dose between 2 and 8?μg. Transport modeling predicted that these doses will decrease with increasing wind speed. In addition, three DNA sequence-based biosolids source tracking methods were applied to aerosol samples and confirmed the presence of biosolids in aerosols at 5, 65, and 165?m from the aerosol source. Field measurements and modeling indicate that the nature of biosolids-derived aerosol exposure is a series of intermittent high concentration puffs, rather than a continuous low concentration.     

Probing stress effects in HfO2 gate stacks with time dependent measurements

Effects of constant voltage stress (CVS) on gate stacks consisting of an ALD HfO₂ dielectric with various interfacial layers were studied with time dependent sensing measurements: DC I–V, pulse I–V, and charge pumping (CP) at different frequencies. The process of injected electron trapping/de-trapping on pre-existing defects in the bulk of the high-κ film was found to constitute the major contribution to the time dependence of the threshold voltage (V_t) shift during stress. The trap generation observed with the low frequency CP measurements is suggested to occur within the interfacial oxide layer or the interfacial layer/high-κ interface, with only a minor effect on V_t.     

Predation of livestock ticks by chickens as a tick-control method in a resource-poor urban environment

The increasing prevalence of streptococci as causes of potentially fatal nosocomial bacteremia requires that antimicrobial agents used for empiric therapy in hospitalized patients include both pneumococci and viridans group streptococci as well as beta-hemolytic streptococci in their activity profile. In this study, the in vitro activity of cefepime, a new fourth-generation cephalosporin, was compared with other cephalosporins versus 197 nosocomial blood stream isolates of streptococci (20 Streptococcus pneumoniae, 104 viridans group, and 73 beta-hemolytic) isolated from patients at more than 30 medial centers from 1995 to 1997. Additional agents tested included penicillin, erythromycin, and vancomycin. Overall, cefepime inhibited 83% of the isolates at concentrations < or = 0.5 microgram/mL and 100% at < or = 8 micrograms/mL. By comparison, ceftazidime inhibited 35 and 88% of isolates at the same concentrations. Cefepime was approximately eightfold more potent than ceftazidime against S. pneumoniae, viridans group streptococci, and beta-hemolytic streptococci. Among the 42 isolates with penicillin MICs > 0.12 microgram/mL, 100% were inhibited by cefepime and only 48% by ceftazidime at < or = 8 micrograms/mL. The rank order of activity for all six agents against the 197 isolates was vancomycin > ceftriaxone > cefepime > penicillin > erythromycin > ceftazidime. Based on the results of the present study, cefepime and ceftriaxone were the superior cephalosporins in potency and spectrum for empiric coverage of patients at risk for streptococcal blood stream infections.     

Interactions in the complement-mediated lysis of blood group AB erythrocytes sensitized simultaneously with anti-A and anti-B monoclonal antibodies

The lysis of group AB erythrocytes by human complement was studied by different anti-A and anti-B IgM monoclonal antibodies (mabs) in a 51Cr-release assay. The concentration of membrane-bound immunoglobulin was detected by ELISA, and the amount of C1q and C3 bound to sensitized red cells was measured by using purified, 125I-labelled molecules. We have demonstrated that there is an exponential relationship between the concentration of the sensitizing IgM mabs and C1q binding to the sensitized AB cell. The efficiency of binding was related to the number of antibodies bound; thus, anti-A sensitized cells bound 3-6 times more C1q than anti-B sensitized cells did. AB cells, on the other hand, bound similar amounts of C3 whether anti-A or anti-B was present. The lytic efficiencies of the various IgM mabs during short incubation times were different, suggesting that the complement activation rates vary widely with different antibodies on the AB cell membrane. The binding of C1q to an antibody-sensitized target activates a cascade, whose components may migrate away from the sensitizing antibody; interactions between the activation processes generated by the anti-A and anti-B antibodies may thus occur. Choosing appropriate pairs of anti-A and anti-B mabs for the simultaneous sensitization of AB cells has indeed resulted in stimulation in some and inhibition in other combinations of mabs. It is suggested that stimulation is observed when the activated intermediates are produced in excess, whereas inhibition occurs when a shortage of activated intermediates prevents mutual utilization.     

Transformations for nonideal uniform circular arrays operating in correlated signal environments

The Davies transformation is a method to transform the steering vector of a uniform circular array (UCA) to one with Vandermonde form. As such, it allows techniques such as spatial smoothing for direction-of-arrival (DOA) estimation in a correlated signal environment, developed originally for uniform linear arrays, to be applied to UCAs. However, the Davies transformation can be highly sensitive to perturbations of the underlying array model. This paper presents a method for deriving a more robust transformation using optimization techniques. The effectiveness of the method is illustrated through a number of DOA estimation examples.     

The role of hydrodynamic stress on the phenotypic characteristics of single and binary biofilms of Pseudomonas fluorescens.

This study investigates the phenotype of turbulent (Re = 5,200) and laminar (Re = 2,000) flow-generated Pseudomonas fluorescens biofilms. Three P. fluorescens strains, the type strain ATCC 13525 and two strains isolated from an industrial processing plant, D3-348 and D3-350, were used throughout this study. The isolated strains were used to form single and binary biofilms. The biofilm physiology (metabolic activity, cellular density, mass, extracellular polymeric substances, structural characteristics and outer membrane proteins [OMP] expression) was compared. The results indicate that, for every situation, turbulent flow-generated biofilms were more active (p < 0.05), had more mass per cm(2) (p < 0.05), a higher cellular density (p < 0.05), distinct morphology, similar matrix proteins (p > 0.1) and identical (isolated strains -single and binary biofilms) and higher (type strain) matrix polysaccharides contents (p < 0.05) than laminar flow-generated biofilms. Flow-generated biofilms formed by the type strain revealed a considerably higher cellular density and amount of matrix polysaccharides than single and binary biofilms formed by the isolated strains (p < 0.05). Similar OMP expression was detected for the several single strains and for the binary situation, not dependent on the hydrodynamic conditions. Binary biofilms revealed an equal coexistence of the isolated strains with apparent neutral interactions. In summary, the biofilms formed by the type strain represent, apparently, the worst situation in a context of control. The results obtained clearly illustrate the importance of considering strain variation and hydrodynamics in biofilm development, and complement previous studies which have focused on physical aspects of structural and density differences.