Current trends in structural development and modification strategies for metal-organic frameworks (MOFs) towards photocatalytic H2 production: A review

Photocatalytic H₂ generation using semiconductor photocatalysts is considered as a cost-effective and eco-friendly technology for solar to energy conversion; however, the present photocatalysts have been recognized to depict low efficiency. Currently, porous coordination polymers known as metal-organic frameworks (MOFs) constituting flexible and modifiable porous structure and having excess active sites are considered to be appropriate for photocatalytic H₂ production. This review highlights current progress in structural development of MOF materials along with modification strategies for enhanced photoactivity. Initially, the review discusses the photocatalytic H₂ production mechanism with the concepts of thermodynamics and mass transfer with particular focus on MOFs. Elaboration of the structural categories of MOFs into Type I, Type II, Type III and classification of MOFs for H₂ generation into transition metal based, post-transition metal based, noble-metal based and hetero-metal based has been systematically discussed. The review also critically deliberate various modification approaches of band engineering, improvement of charge separation, efficient irradiation utilization and overall efficiency of MOFs including metal modification, heterojunction formation, Z-scheme formation, by introducing electron mediator, and dye based composites. Also, the MOF synthesized derivatives for photocatalytic H₂ generation are elaborated. Finally, future perspectives of MOFs for H₂ generation and approaches for efficiency improvement have been suggested.     

Influence of accelerated curing on the compressive strength of polymer-modified concrete

In recent building practice, rapid construction is one of the principal requisites. Furthermore, in designing concrete structures, compressive strength is the most significant of all parameters. While 3-d and 7-d compressive strength reflects the strengths at early phases, the ultimate strength is paramount. An effort has been made in this study to develop mathematical models for predicting compressive strength of concrete incorporating ethylene vinyl acetate (EVA) at the later phases. Kolmogorov-Smirnov (KS) goodness-of-fit test was used to examine distribution of the data. The compressive strength of EVA-modified concrete was studied by incorporating various concentrations of EVA as an admixture and by testing at ages of 28, 56, 90, 120, 210, and 365 d. An accelerated compressive strength at 3.5 hours was considered as a reference strength on the basis of which all the specified strengths were predicted by means of linear regression fit. Based on the results of KS goodness-of-fit test, it was concluded that KS test statistics value (D) in each case was lower than the critical value 0.521 for a significance level of 0.05, which demonstrated that the data was normally distributed. Based on the results of compressive strength test, it was concluded that the strength of EVA-modified specimens increased at all ages and the optimum dosage of EVA was achieved at 16% concentration. Furthermore, it was concluded that predicted compressive strength values lies within a 6% difference from the actual strength values for all the mixes, which indicates the practicability of the regression equations. This research work may help in understanding the role of EVA as a viable material in polymer-based cement composites.     

Hybrid wideband transceiver design for achievable rate maximization in millimeter-wave MIMO systems

Telecommunication Systems - This paper proposes two algorithms for hybrid (Analog–Digital) beamforming in a single-user millimeter-wave (mm-wave) multi-input multi-output (MIMO) systems under...     

Qualitative response of safety injection system for a large size break in the reactor coolant system cold leg

Safety injection system, accumulator injection system and residual heat removal system of CHASNUPP-1 were simulated using the computer code APROS. We observed the qualitative response of the simulated system during injection and re-circulation phases after LOCA. During rapid depressurization of SRC system due to leakage, these systems started coolant injection in the SRC system as per plant requirement. Different thermal-hydraulic parameters of the respective systems are presented and discussed. Results obtained are in good agreement with the reported document of the reference power plant.     

GA-SVR: a novel hybrid data-driven model to simulate vertical load capacity of driven piles

Piles are widely applied to substructures of various infrastructural buildings. Soil has a complex nature; thus, a variety of empirical models have been proposed for the prediction of the bearing capacity of piles. The aim of this study is to propose a novel artificial intelligent approach to predict vertical load capacity of driven piles in cohesionless soils using support vector regression (SVR) optimized by genetic algorithm (GA). To the best of our knowledge, no research has been developed the GA-SVR model to predict vertical load capacity of driven piles in different timescales as of yet, and the novelty of this study is to develop a new hybrid intelligent approach in this field. To investigate the efficacy of GA-SVR model, two other models, i.e., SVR and linear regression models, are also used for a comparative study. According to the obtained results, GA-SVR model clearly outperformed the SVR and linear regression models by achieving less root mean square error (RMSE) and higher coefficient of determination (R²). In other words, GA-SVR with RMSE of 0.017 and R² of 0.980 has higher performance than SVR with RMSE of 0.035 and R² of 0.912, and linear regression model with RMSE of 0.079 and R² of 0.625.

     

Applying dual-tree complex discrete wavelet transform and gamma modulating function for simulation of ground motions

The aim of this paper is to develop a stochastic-parametric model for the generation of synthetic ground motions (GMs) which are in accordance with a real GM. In the proposed model, the dual-tree complex discrete wavelet transform (DT-CDWT) is applied to real GMs to decompose them into several frequency bands. Then, the gamma modulating function (GMF) is used to simulate the wavelet coefficients of each level. Consequently, synthetic wavelet coefficients are generated using extracted model parameters and then synthetic GM is extracted by applying the inverse DT-CDWT to synthetic wavelet coefficients. This model simulates the time–frequency distribution of both wide-frequency and narrow-frequency bandwidth GMs. Besides being less time consuming, it simulates several dominant frequency peaks at any moment in the time duration of GM, because each frequency band is separately simulated by the gamma function. Moreover, the inelastic response spectra of synthetic GMs generated by the proposed model are a good estimate of target ones. Using the random sign generator in the proposed model, it is possible to generate any number of synthetic GMs in accordance with a recorded one. Because of these advantages, the proposed model is suitable for using in performance-based earthquake engineering.

     

A review on fault detection and diagnosis techniques: basics and beyond

Safety and reliability are absolutely important for modern sophisticated systems and technologies. Therefore, malfunction monitoring capabilities are instilled in the system for detection of the incipient faults and anticipation of their impact on the future behavior of the system using fault diagnosis techniques. In particular, state-of-the-art applications rely on the quick and efficient treatment of malfunctions within the equipment/system, resulting in increased production and reduced downtimes. This paper presents developments within Fault Detection and Diagnosis (FDD) methods and reviews of research work in this area. The review presents both traditional model-based and relatively new signal processing-based FDD approaches, with a special consideration paid to artificial intelligence-based FDD methods. Typical steps involved in the design and development of automatic FDD system, including system knowledge representation, data-acquisition and signal processing, fault classification, and maintenance related decision actions, are systematically presented to outline the present status of FDD. Future research trends, challenges and prospective solutions are also highlighted.

     

十六烷基三甲基季铵阳离子改良二氧化硅对酸性染料的吸着

The sorption behavior of acid dyes onto cetyltrimethylammonium bromide (CTAB)-modified silica as a function of pH in the aqueous medium was studied. Single-and multi-solute sorption equilibria of orange Ⅱ（OR), phenol red (PR) and Eriochrome Black T (EBT) were studied at pH 3, unbuffered water pH and pH 11. Sorption behavior of EBT could not be conducted at pH3 due to its aggregation in acidic medium. All the reaction conditions, experimental protocols and techniques remained the same throughout the sorption process. Sorption isotherms for single-solute system were fitted by the Langmuir model, while Langmuir competitive model (LCM) and the ideal adsorbed solution theory (IAST) coupled with Langmuir model (IAST/Langmuir) were used for the prediction of multisolute competitive sorption. Sorption affinities influenced by the factors like physical interactive forces between the molecules of CTA on silica and sorbate, structural limitations of the dyes based on their geometrical arrangement were investigated. Sorption affinity of OR was found to be higher than that of EBT and PR at all the pH values investigated. Magnitude of the sorption capacities was observed to be higher in acidic medium but lower in alkaline medium. Trends of the sorption affinities in multisolute system were simlar to those in single-solute system but magnitude of the sorption capacities was significantly reduced due to the prevailing competition among the sorbates.     

The correlations between structural and optical properties of magnetite nanoparticles synthesised from natural iron sand

The correlations between structural and optical properties of magnetite (Fe₃O₄) nanoparticles were analyzed by using X-Ray Diffraction (XRD) and Fourier Transform Infrared (FTIR) Spectroscopy. The magnetite was synthesised from the iron sand using NaOH, HCl, and NaCl as a solvent. From the quantitative analysis of XRD spectra, the crystallite size (D), strain ($\epsilon$), stress ($\sigma$), energy deformation (u), porosity, and specific surface area were determined. The Kramers Kronig (K–K) relations was applied to the FTIR spectra to determine the optical properties: refractive index (n), extinction coefficient (k), the complex dielectric function ($\mathit{\epsilon }$), and the energy loss function (Im(-1/ε)). The uniform strain was produced from the NaOH and HCl as the solvent. The magnetite had higher porosity with NaCl as a solvent and was directly proportional to the optical phonon vibration. We found a perfect correlation; when the difference between two optical phonon increases, the crystallite size decreases, and the strain will be uniform.     

Characterisation and catalytic properties of MCM-41 and Pd/MCM-41 materials

Pure silica MCM-41 mesoporous molecular sieve material was synthesised and characterised by in situ synchrotron XRD, TEM, TGA/DTA and DRIFTS techniques. In situ energy dispersive XRD (EDXRD) confirmed the exact nature of the pore diameter of MCM-41 and the change in crystal structure on calcination. The IR band at 1057 cm^-1 of as-synthesised MCM-41 was shifted by 14 cm^-1 on heating to 673 K due to increased condensation of silanol groups to form Si-O-Si bridges. Calcined MCM-41 materials were used to support Pd, and the catalytic activities for 1-hexene and benzene selective hydrogenation were investigated. The Pd/MCM-41 catalyst showed high activity in hydrogenation of 1-hexene at an inlet reaction temperature of 298 K, but did not show any activity in hydrogenation for benzene. TEM results for the reduced Pd/MCM-41 catalysts revealed that the average Pd particle size was around 2-2.5 nm and these particles were located in the pores of MCM-41 and showed good distribution. TPR measurements showed that about 70% of palladium oxide (PdO) loading in the calcined catalysts was reduced at sub-ambient temperature. This revised version was published online in July 2006 with corrections to the Cover Date.