Performance prediction of a hybrid‐excitation synchronous machine with axially arranged excitation poles and permanent‐magnet poles

This paper presents a method of predicting the steady‐state performance of a new hybrid‐excitation synchronous machine (HESM) theoretically. The field pole of this HESM is axially divided into two parts; one is an excitation part and the other a permanent‐magnet (PM) part. A nonlinear equivalent circuit, which can include the saliency of the rotor and the magnetic saturation due to the iron core, is derived. Based on this equivalent circuit, the steady‐state performance of the HESM is calculated, and the results are confirmed through experiments. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(2): 43–49, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20033     

Synthesis of polymeric microspheres employing SPG emulsification technique

Relatively uniform polymeric microspheres, the coefficients of variation being close to 10%, were obtained by the BPO-initiated suspension polymerization of styrenic monomers. Unlike the conventional stirred-tank system, a particular microporous glass membrane (SPG) provided uniform monomer droplets continuously when monomer was allowed to permeate through the micropores. The monomer droplets were suspended in an aqueous solution containing the stabilizing agents, transferred to a stirred vessel, and polymerized. Up to 10μm spheres, of a far narrower size distribution than those obtained by conventional microsuspension polymerization spheres, were obtained. The initial droplet size and distribution were retained with the successful suppression of secondary particle nucleation by the addition of hydroquinone in the aueous phase. Crosslinked polystyrene spheres were also synthesized in the presence of various low-molecular-weight diluents. While a good solvent, toluene, was not so effective; poor solvents, n-heptane and n-heptane, easily yielded the microporous structure, the specific surface area being as high as 160 m²/g. © 1994 John Wiley & Sons, Inc.     

Morphological study by TEM on uniaxially oriented thin films of PET, PEN and their blends

Uniaxially oriented thin films of poly(ethylene terephthalate) (PET), poly(ethylene 2,6-naphthalene dicarboxylate) (PEN) and their blends were prepared by applying shear strain to their respective melts, and the resulting morphologies were studied by transmission electron microscopy. Selected-area electron diffraction of each film revealed well-defined uniaxial orientation of polymer chains in the shearing direction. In the uniaxially oriented thin film of PEN, stacked-lamellar structure with the average long period of 27 nm consisting of a crystalline region about 15 nm thick and an amorphous one about 12 nm thick was found here and there in the dark-field image: PEN-type. On the other hand, stacked-lamellar structure was rarely observed in the case of PET: PET-type. In PET/PEN blends, the morphologies changed from the PET-type to the PEN-type with increasing content of PEN.     

具有硬核—软壳结构的丙烯酸聚合物乳液的研究

利用种子乳液聚合法合成了具有硬核—软壳结构的丙烯酸聚合物微粒子,通过对种子粒子数和最终粒子数的理论计算,并结合最低成膜温度(MFT)的测试结果,描述了聚合物微粒子的聚合过程,同时,还对聚合物乳液的各项性能进行了研究。     

Optimizing time histograms for non-Poissonian spike trains

The time histogram is a fundamental tool for representing the inhomogeneous density of event occurrences such as neuronal firings. The shape of a histogram critically depends on the size of the bins that partition the time axis. In most neurophysiological studies, however, researchers have arbitrarily selected the bin size when analyzing fluctuations in neuronal activity. A rigorous method for selecting the appropriate bin size was recently derived so that the mean integrated squared error between the time histogram and the unknown underlying rate is minimized (Shimazaki & Shinomoto, 2007 ). This derivation assumes that spikes are independently drawn from a given rate. However, in practice, biological neurons express non-Poissonian features in their firing patterns, such that the spike occurrence depends on the preceding spikes, which inevitably deteriorate the optimization. In this letter, we revise the method for selecting the bin size by considering the possible non-Poissonian features. Improvement in the goodness of fit of the time histogram is assessed and confirmed by numerically simulated non-Poissonian spike trains derived from the given fluctuating rate. For some experimental data, the revised algorithm transforms the shape of the time histogram from the Poissonian optimization method.     

Secondary Resistance Identification of an Induction-Motor Applied Model Reference Adaptive System and Its Characteristics

Induction-motor torque is not accurately controlled when the estimated secondary resistance of an induction-motor model in a vector controller differs from the true secondary resistance. An algorithm which identifies the secondary resistance on-line is developed. The motor operating condition for secondary resistance identification, the stable identifier organization, and the experimental investigation confirming the identification algorithm performance are presented. The algorithm is based on the theory of model reference adaptive systems (MRAS). The proposed algorithm stably identifies the secondary resistance under any load and any speed when a sinusoidal signal is injected into the flux axis primary current. The vector controller adopting this algorithm controls motor torque accurately under any load and any speed.     

Characterization of a mixed sphere and film waveguide at the 1-microm scale by 0.67-microm laser light propagation

A mixed sphere array and film (MSF) waveguide [a mixed system with a polystyrene microsphere array and a poly(methyl methacrytate) thin film waveguide] was fabricated and characterized at a wavelength of 0.67 microm. The attenuation coefficients of the isolated linear thin-film waveguide and the isolated linear microsphere array were measured to be 0.54 dB/microm and 0.98 dB/sphere, respectively. In the MSF waveguide the attenuation coefficients of the thin-film waveguide and the polystyrene microsphere array were 0.61 dB/microm and 1.17 dB/sphere, respectively. A curvilinear MSF waveguide was also fabricated and characterized. Evanescent wave interaction between the thin-film waveguide and the microsphere array was expected.     

Self-assembly of nano-sized arrays on highly oriented thin films of poly(tetrafluoroethylene)

Self-assembly of nano-sized arrays by casting a dilute solution of a guest material on the friction-transferred poly(tetrafluoroethylene) (FT-PTFE) substrate was newly discovered. Long axis of the rod-like structures forming the arrays is aligned perpendicular to the chain direction of FT-PTFE, and accordingly, the arrays are highly anisotropic. This phenomenon was observed for aqueous or organic solutions of polymers or organic materials. Each rod-like structure forming the arrays is composed of small grains. The arrays in question are formed regardless to the crystallinity of the guest materials. The formation mechanism of the nano-sized arrays is still unclear. However, we guess that they are formed as a result of microscopic flow pattern at the edge of the solution film. The arrays in question may be a new type of dissipative structure.     

Reaction of poly(epichlorohydrin) with sodium diethyldithiocarbamate and RI-UV dual-detector GPC of the product

Summary The chlorine in poly(epichlorohydrin) was found to be substituted by diethyldithiocarbamate (ETC) group by the reaction with NaETC in tetrahydrofuran at 60°C. The reaction product was analyzed by RI-UV dual-detector GPC. The composition i.e. the percentage of the chlorine replaced by the ETC group was found to be invariant with the elution count. This result might indicate the absence of polymer effect in the carbamation of poly(epichlorohydrin).     

Effect of thermal annealing on electrical degradation characteristics of Sb–Bi–Mn–Co-added ZnO varistors

The effects of thermally annealing Bi–Mn–Co–Sb₂O₃-added ZnO varistors on their electrical degradation were investigated. For the samples added with 0.01 mol% Sb₂O₃ and without Sb₂O₃, no marked difference in the nonlinearity index α of the voltage–current (V–I) characteristics was observed upon electrical degradation for the annealed and nonannealed samples. Upon increasing the amount of Sb₂O₃ added, the values of α increased after electrical degradation for the annealed samples. Moreover, the value of α after electrical degradation was proportional to the width of gauss function (width) of the X-ray diffraction peak for Zn_2.33Sb_0.67O₄-type spinel particles under various annealing conditions. The added Sb₂O₃ did not dissolve in the ZnO grains but became segregated at grain boundaries. Therefore, it is speculated that the increase in the width of the spinel particles is due to the increase in the numbers of fine spinel particles at grain boundaries and triple points. Furthermore, it is suggested that the improvement of the electrical degradation is due to the decrease in the mobility of oxide ions or Zn²⁺ ions owing to their being blocked by uniformly dispersed fine spinel particles at grain boundaries.