Development of low-alcohol isotonic beer by interrupted fermentation

Alcohol-free beer with isotonic properties is getting more popular and its production can be carried out by different production strategies; however, interrupted fermentation is still a challenge. Therefore, the objective of this study was to develop a low-alcohol isotonic beer (<0.5% v/v) by interrupted fermentation. Moreover, the major objective is to compare the developed product to commercial beverages (sports drinks, ‘Pilsen' regular beer, alcohol-free beers and low-alcohol isotonic beer). The beverages were evaluated based on pH, alcohol content (% v/v), total titratable acidity (mEq L⁻¹), osmolality (mOsmol kg⁻¹), bitterness International Bitterness Units, colour European Brewery Convention, total phenolic compounds (mg L⁻¹ gallic acid), reducing and total sugars (%) and Na and K contents (mg L⁻¹). The developed low-alcohol isotonic beer presented characteristics similar to sports drinks, with the advantage of being richer in phenolic compounds and suitable osmolality. Despite salts were added in its formulation, the grades attributed to all beers employed in the sensory evaluation, as well as the purchase intention did not present significant differences.     

DILIGENT: integrating digital library and Grid technologies for a new Earth observation research infrastructure

This paper introduces DILIGENT, a digital library infrastructure built by integrating digital library and Grid technologies and resources. This infrastructure allows different communities to dynamically build specialised digital libraries capable to support the entire e-Science knowledge production and consumption life-cycle by using shared computing, storage, content, and application resources. The paper presents some of the main software services that implement the DILIGENT system. Moreover, it exemplifies the provided features by presenting how the DILIGENT infrastructure is being exploited in supporting the activity of user communities working in the Earth Science Environmental sector. This work is partially funded by the European Commission in the context of the DILIGENT project, under the 2nd call of FP6 IST priority.     

Frequency offset retrodirective antenna array

A new architecture for the Van Atta self-steering array is presented. Active antenna techniques are used to realise a compact self-steering array with enhanced retrodirective properties. The experimental performance of the array is demonstrated and a technique is described which compensates for the beam pointing error induced by antenna array element directivity     

Silver electrodeposition from air and water-stable ionic liquid: An environmentally friendly alternative to cyanide baths

The influence of temperature on the kinetics and the morphology of silver deposits obtained from an air and water-stable ionic liquid (the 1-butyl-3-methyl imidazolium tetrafluoroborate) was studied by means of cyclic voltammetry and chronoamperometry. The nucleation and growth mechanisms have been investigated and the effect of temperature evaluated up to 200 °C. Dense, pure and very thin (about 0.3 μm) silver coatings, with decorative properties, have been obtained on commercial copper electrodes at different temperatures. The characterization of the deposits morphology has been performed by visual investigation and SEM microscopy. Data about thickness were acquired by Calotest® measurements. The deposits result constituted by pure silver as determined by combination of EDX microanalysis and Auger Electron Spectroscopy (AES). The deposition method promises to be a new, environmentally friendly, method for silver electrodeposition which is the reason for the absence of cyanide and volatile toxic solvents in the electroplating bath.     

A novel silicon Schottky diode for NLTL applications

The design and simulation of a novel silicon Schottky diode for nonlinear transmission line (NLTL) applications is discussed in this paper. The Schottky diode was fabricated on a novel silicon-on-silicide-on-insulator (SSOI) substrate for minimized series resistance. Ion implantation technology was used as a low-cost alternative to molecular beam epitaxy to approximate the delta (/spl delta/) doping profile, which results in strong nonlinear CV characteristics. The equivalent circuit model of the Schottky diode under reverse bias conditions was extracted from the S-parameter measurement performed on the diode. The measured CV characteristics show strong nonlinearity, the junction capacitance varies from 182 to 47.5 fF as the reverse bias voltage is varied from 0 to -5 V. A parasitic inductance of 40 pH was measured for the silicon Schottky diode, which is much smaller than a comparable sized GaAs Schottky diode. This small inductance is an advantage for the silicon Schottky diode offering improvement in the silicon NLTL performance.     

Estimation of thermal diffusivity of foods using transfer functions

The effective thermal diffusivity of foodstuffs was estimated from time-temperature histories in the geometric center of samples exposed to heating and cooling processes.Transfer functions methodology was used as an alternative method to estimate the thermal diffusivity assuming that conduction was the main heat transfer mechanism. The samples were characterized as delayed first-order systems with unit gain, dead time (L) and time constant (τ).The results were compared with those obtained from the f_h value and with results reported in the literature.     

Active antenna array lumped ring configuration

Coupled active antenna oscillator arrays are used for power-combining at microwave and millimeter-wave frequencies. It is known that the relative phase determined by the element separation distance ultimately determines the array operational mode and, hence, far-field radiation characteristics. Separately, it is known that coupled oscillator modal stability is achieved by coupling oscillators through lumped capacitive elements. In this paper, an arrangement whereby lumped capacitive elements (placed across the oscillator loads) and radiative coupling are employed concurrently is investigated. The arrangement takes the form of a ring of coupled oscillators used to excite a 2×2 antenna array. The effect that these couplings have on array behavior are evaluated using time-domain analysis and analytically derived equations. Experimental results for far-field radiation patterns are discussed in relation to coupled oscillator dynamical behavior. These suggest that the theoretical predictions are valid, offering a robust design tool for studies of larger power-combining arrays     

Numerical electromagnetic simulator termination de-embeddingtechnique

The authors report a novel approach whereby transmission-line end effects can be assessed by numerical simulation without recourse to the evaluation of the propagation properties of the line interconnecting the termination and excitation signal launch planes. As an example of the new technique, a microstrip open-ended line termination simulated by the finite-difference time-domain method is reported. The simulated results are compared with those obtained for the same structure but by a conventional numerical de-embedding scheme. The method presented is completely general and can be applied to any numerical electromagnetic field simulation method solving one-port or multiport networks     

There's more to touch than meets the eye: The salience of object attributes for haptics with and without vision.

The availability and salience of object attributes under haptic exploration, with and without vision, were assessed by 2 tasks in which Ss sorted objects that varied factorially in size, shape, texture, and hardness. In the directed-discrimination task, Ss were instructed to sort along a particular dimension. Although levels on all dimensions were easily discriminated, shape was relatively less so for haptic explorers without vision, as was hardness for those using vision and haptics. Size was least discriminable for both groups. In the free-sorting task, Ss were to sort objects by similarity. Three groups used haptic exploration only; these were differentiated by the experimenters' definition of object similarity: unbiased haptics, haptically biased haptics, haptics plus visual imagery. A 4th group used vision as well as haptics, with instructions like those of the unbiased haptics group. Results support the contention that the haptic and visual systems have distinct encoding pathways, with haptics oriented toward the encoding of substance rather the shape. This may reflect a direct influence of haptic exploratory procedures. (PsycINFO Database Record (c) 2010 APA, all rights reserved)