Comparative analysis of formaldehyde and toluene sorption on indoor floorings and consequence on Indoor Air Quality

Indoor surfaces may be adsorptive sinks with the potential to change Indoor Air Quality. To estimate this effect, the sorption parameters of formaldehyde and toluene were assessed on five floorings by an experimental method using solid-phase microextraction in an airtight emission cell. Adsorption rate constants ranged from 0.003 to 0.075 m·h⁻¹, desorption rate constants from 0.019 to 0.51 h⁻¹, and the partition coefficient from 0.005 to 3.9 m, and these parameters vary greatly from one volatile organic compound/material couple to another indicating contrasted sorption behaviors. A rubber was identified as a sink of formaldehyde characterized by a very low desorption constant close to 0. For these sorbent floorings identified, the adsorption rates of formaldehyde are from 2 to 4 times higher than those of toluene. Two models were used to evaluate the sink effects of floorings on indoor pollutant concentrations in one room from different realistic conditions. The scenarios tested came to the conclusion that the formaldehyde sorption on one rubber (identified as a sink) has a maximum contribution from 15% to 21% for the conditions of low air exchange rate. For other floorings, the sorption has a minor contribution less than or equal to 5%, regardless of the air exchange rate.     

Coil‐Type Asymmetric Supercapacitor Electrical Cables

Cable‐shaped supercapacitors (SCs) have recently aroused significant attention due to their attractive properties such as small size, lightweight, and bendability. Current cable‐shaped SCs have symmetric device configuration. However, if an asymmetric design is used in cable‐shaped supercapacitors, they would become more attractive due to broader cell operation voltages, which results in higher energy densities. Here, a novel coil‐type asymmetric supercapacitor electrical cable (CASEC) is reported with enhanced cell operation voltage and extraordinary mechanical‐electrochemical stability. The CASECs show excellent charge–discharge profiles, extraordinary rate capability (95.4%), high energy density (0.85 mWh cm⁻³), remarkable flexibility and bendability, and superior bending cycle stability (≈93.0% after 4000 cycles at different bending states). In addition, the CASECs not only exhibit the capability to store energy but also to transmit electricity simultaneously and independently. The integrated electrical conduction and storage capability of CASECS offer many potential applications in solar energy storage and electronic gadgets.     

Synthesis of Long-Chain β-Lactones and Their Antibacterial Activities against Pathogenic Mycobacteria

In the quest for new antibacterial agents, a series of novel long- and medium-chain mono- and disubstituted β-lactones was developed. Their activity against three pathogenic mycobacteria—M. abscessus, M. marinum, and M. tuberculosis—was assessed by the resazurin microtiter assay (REMA). Among the 16 β-lactones synthesized, only 3-hexadecyloxetan-2-one (VM005) exhibited promising activity against M. abscessus, whereas most of the β-lactones showed interesting activities against M. marinum, similar to that of the classical antibiotic, isoniazid. Regarding M. tuberculosis, six compounds were found to be active against this mycobacterium, with β-lactone VM008 [trans-(Z)-3-(hexadec-7-en-1-yl)-4-propyloxetan-2-one] being the best growth inhibitor. The promising antibacterial activities of the best compounds in this series suggest that these molecules may serve as leads for the development of much more efficient antimycobacterial agents.     

Impact of the anode operating conditions on the liquid water distribution in the cathode gas diffusion layer

Previous experimental results indicate that the humidification conditions at the anode have an impact on the liquid water distribution in the cathode gas diffusion layer. Numerical simulations are developed to reproduce and analyze this effect. Results consistent with the experimental results are first obtained by playing with the partition coefficients of an advanced pore network model computing the liquid water formation and transfer in the cathode gas diffusion layer (GDL) for a large range of operating conditions. Then, a model for the full anode – cathode assembly is developed by combining the pore network model of the cathode GDL and a 1D model describing the heat and water transfer in the various components of the anode-cathode assembly. This enables one to generalize the dry – wet regime diagram introduced in a previous work by incorporating the effect of the humidity condition at the anode.     

Spatio-temporal evolution of the deformation around the Rio-Patras fault (Greece) observed by synthetic aperture radar interferometry from 1993 to 2017

We analysed the ground deformation across two blocks defined by the Rio-Patras fault from 1993 to 2017 using multi-temporal Synthetic Aperture Radar Interferometry (InSAR) techniques. Our main objective was to contribute to the assessment of seismic hazard near the large city of Patras. Multiple data-sets were used, each one covering different temporal periods. Descending and ascending acquisitions, providing different viewing geometries contribute to fully determine the ground displacement in 3D. The data-sets used are from the European Space Agency’s (ESA) European Remote Sensing (ERS), Environmental Satellite (ENVISAT) and SENTINEL-1 as well as German Aerospace Center (DLR) ’s TERRASAR-X missions. Considering ESA’s missions covering both acquisition geometries and long periods, the southern block, showing lack of a sufficient number of scatterers does not allow the displacement characterization. In contrary, the northern block is characterized by a high number of scatterers having values of maximum likehood ranging from ?3.5 to ?4.3 mm year^?1 for ascending geometry and from ?1.6 to ?2.7 mm year^?1 for the descending one. The fact that both geometries show negative values of displacements are consistent with downlift movement and at the same time the quantitative differentiation probably indicates an horizontal component as well.     

ProVoc: An app to train vocabulary depth in order to foster children's reading comprehension

Many studies have demonstrated the crucial role of vocabulary in predicting reading performance in general. More recent work has indicated that one particular facet of vocabulary (its depth) is more closely related to language comprehension, especially inferential comprehension. On this basis, we developed a training application to specifically improve vocabulary depth. The objective of this study was to test the effectiveness of a mobile application designed to improve vocabulary depth. The effectiveness of this training was examined on 3rd and 4th grade children's vocabulary (breadth and depth), decoding and comprehension performances. A randomized waiting-list control paradigm was used in which an experimental group first received the intervention during the first 4 weeks (between pretest and post-test1), thereafter, a waiting control group received the training for the next 4 weeks (between postest1 and posttest2). Results showed that the developed application led to significant improvements in terms of vocabulary depth performance, as well as a significant transfer effect to reading comprehension. However, we did not observe such a beneficial effect on either vocabulary breadth or written word identification. These results are discussed in terms of the links between vocabulary depth and comprehension, and the opportunities the app presents for remedying language comprehension deficits in children.     

Evaluation of the effect of processing on cocoa polyphenols: antiradical activity,anthocyanins and procyanidins profiling from raw beans to chocolate

The content and composition of anthocyanins and procyanidins in fermented cocoa beans (from different geographic origins: Ecuador, Cameroon, Ivory Coast, Ghana and Nigeria), roasted nibs, cocoa mass and chocolate were determined, beside the determination of the total antiradical capacity. Concerning geographic origin, cocoa beans and processed products from Ecuador showed the highest levels of anthocyanins, followed by Nigeria and Cameroon. Generally, as cocoa beans were further processed, the levels of anthocyanins and flavan‐3‐ols decreased. The largest observed losses of phenolics occurred during roasting. A progressive decreasing trend in polyphenol concentration was observed in the other processed samples as well. Despite the original content of polyphenols in raw cocoa beans, technological processes imply a significant impact on cocoa quality, confirming the need of specific optimisation to obtain high value chocolate.     

Effect of the cultivation mode on red pigments production from Monascus ruber

In submerged cultures performed in chemically defined fermentation medium containing glucose and glutamate, the growth and production of water‐soluble red pigments and citrinin by the filamentous fungus Monascus ruber were studied under various carbon/nitrogen (C/N) ratios. The specific production of the red pigments was optimal at a glucose/glutamate ratio of about 10 and then steadily decreased at higher C/N ratio. In contrast, the production of the mycotoxin increased with increased C/N with an optimum in the range of 30–45. In a fed‐batch mode, it was also found that the production of pigments was not favoured in fed‐batch mode by feeding the medium with glucose while keeping the C/N ratio lower than 10. This low production likely resulted from concurrent high accumulation of L‐malic acid that was reported to inhibit this production. In contrast, this mode of cultivation was rather favourable for the production of the mycotoxin.