The Antibacterial Drug Candidate SBC3 is a Potent Inhibitor of Bacterial Thioredoxin Reductase

Antibiotic resistance is a growing problem for public health and associated with increasing economic costs and mortality rates. Silver and silver-related compounds have been used for centuries due to their antimicrobial properties. In this work, we show that 1,3-dibenzyl-4,5-diphenyl-imidazol-2-ylidene silver(I) acetate/NHC*-Ag-OAc (SBC3) is a reversible, high affinity inhibitor of E. coli thioredoxin reductase (TrxR; K_i=10.8±1.2 nM). Minimal inhibition concentration (MIC) tests with different E. coli and P. aeruginosa strains demonstrated that SBC3 can efficiently inhibit bacterial cell growth, especially in combination with established antibiotics like gentamicin. Our results show that SBC3 is a promising antibiotic drug candidate targeting bacterial TrxR.     

Fringing in tubular permanent-magnet machines: Part I. Magnetic field distribution, flux linkage, and thrust force

This paper extends an analysis developed for tubular permanent-magnet machines to account for the effect of fringing associated with the finite length of the ferromagnetic armature core. The magnetic field distribution, established by using an analytical technique formulated in the cylindrical coordinate system, provides an accurate means of evaluating the effect of the fringing flux on the thrust force and the back-electromotive force. Finite-element calculations confirm the analytically derived results. In Part II of the paper, the analysis is used to predict the cogging force that results from end effects and to facilitate minimization of the force.     

A phase I-II study of paclitaxel, ifosfamide, and vinorelbine with filgrastim (rhG-CSF) support in advanced non-small-cell lung cancer

PURPOSE: We designed a phase I-II trial of three active agents, paclitaxel, ifosfamide, and vinorelbine, in advanced non-small-cell lung cancer (NSCLC) to: 1) define the dose-limiting toxicities (DLT) and maximum tolerated dose (MTD) of paclitaxel with filgrastim (G-CSF) support; and 2) determine the overall response rate and median survival of patients treated on this regimen. PATIENTS AND METHODS: We treated cohorts of patients with stage IIIB or IV NSCLC with ifosfamide 1.2-1.6 g/m2/day x 3 and vinorelbine 20-25 mg/m2/day x 3 and escalating doses of paclitaxel at 100-175 mg/m2 on day 2 with G-CSF support on a 21-day cycle. One prior experimental single-agent chemotherapy regimen was allowed. RESULTS: Fifty-six patients, were enrolled on this trial: 27 on the phase I portion of the study and an additional 29 at the recommended phase II dose (RPTD). Thirteen patients had received prior chemotherapy. Paclitaxel doses of 175 mg/m2 and 150 mg/m2 produced dose-limiting myelosuppression, and the RPTD was determined to be paclitaxel 135 mg/m2 with ifosfamide 1.2 g/m2/day on days 1-3 and vinorelbine 20 mg/m2/ day on days 1-3 with G-CSF support. The overall response rate was 18%, with a median survival of 6.1 months. Six of 35 patients (17%) treated at the RPTD achieved a partial response to therapy. Grade IV neutropenia was observed in 19 of 35 patients at this dose, with eight patients suffering febrile neutropenia. CONCLUSIONS: This non-cisplatin-containing three-drug regimen has substantial toxicity and low activity in advanced NSCLC, and does not seem to improve on prior regimens. It is unclear whether the lack of efficacy relates to an antagonistic reaction between the specific drugs, administration schedule, or to subtherapeutic doses of the individual agents.     

The cellular trafficking and zinc dependence of secretory and lysosomal sphingomyelinase, two products of the acid sphingomyelinase gene

The acid sphingomyelinase (ASM) gene, which has been implicated in ceramide-mediated cell signaling and atherogenesis, gives rise to both lysosomal SMase (L-SMase), which is reportedly cation-independent, and secretory SMase (S-SMase), which is fully or partially dependent on Zn2+ for enzymatic activity. Herein we present evidence for a model to explain how a single mRNA gives rise to two forms of SMase with different cellular trafficking and apparent differences in Zn2+ dependence. First, we show that both S-SMase and L-SMase, which contain several highly conserved zinc-binding motifs, are directly activated by zinc. In addition, SMase assayed from a lysosome-rich fraction of Chinese hamster ovary cells was found to be partially zinc-dependent, suggesting that intact lysosomes from these cells contain subsaturating levels of Zn2+. Analysis of Asn-linked oligosaccharides and of N-terminal amino acid sequence indicated that S-SMase arises by trafficking through the Golgi secretory pathway, not by cellular release of L-SMase during trafficking to lysosomes or after delivery to lysosomes. Most importantly, when Zn2+-dependent S-SMase was incubated with SMase-negative cells, the enzyme was internalized, trafficked to lysosomes, and became zinc-independent. We conclude that L-SMase is exposed to cellular Zn2+ during trafficking to lysosomes, in lysosomes, and/or during cell homogenization. In contrast, the pathway targeting S-SMase to secretion appears to be relatively sequestered from cellular pools of Zn2+; thus S-SMase requires exogeneous Zn2+ for full activity. This model provides important information for understanding the enzymology and regulation of L- and S-SMase and for exploring possible roles of ASM gene products in cell signaling and atherogenesis.     

Test Case Generation as an AI Planning Problem

While Artificial Intelligence techniques have been applied to a variety of software engineering applications, the area of automated software testing remains largely unexplored. Yet, test cases for certain types of systems (e.g., those with command language interfaces and transaction based systems) are similar to plans. We have exploited this similarity by constructing an automated test case generator with an AI planning system at its core. We compared the functionality and output of two systems, one based on Software Engineering techniques and the other on planning, for a real application: the StorageTek robot tape library command language. From this, we showed that AI planning is a viable technique for test case generation and that the two approaches are complementary in their capabilities.     

Activity-dependent changes in voltage-dependent calcium currents and transmitter release

The use of capillary electrophoresis (CE) for clinically relevant assays is attractive since it often presents many advantages over contemporary methods. The small-diameter tubing that holds the separation medium has led to the development of multicapillary instruments, and simultaneous sample analysis. Furthermore, CE is compatible with a wide range of detectors, including UV-Vis, fluorescence, laser-induced fluorescence, electrochemistry, mass spectrometry, radiometric, and more recently nuclear magnetic resonance, and laser-induced circular dichroism systems. Selection of an appropriate detector can yield highly specific analyte detection with good mass sensitivity. Another attractive feature of CE is the low consumption of sample and reagents. However, it is paradoxical that this advantage also leads to severe limitation, namely poor concentration sensitivity. Often high analyte concentrations are required in order to have injection of sufficient material for detection. In this regard, a series of devices that are broadly termed 'analyte concentrators' have been developed for analyte preconcentration on-line with the CE capillary. These devices have been used primarily for non-specific analyte preconcentration using packing material of the C18 type. Alternatively, the use of very specific antibody-containing cartridges and enzyme-immobilized microreactors have been demonstrated. In the current report, we review the likely impact of the technology of capillary electrophoresis and the role of the CE analyte concentrator-microreactor on the analysis of biomolecules, present on complex matrices, in a clinical laboratory. Specific examples of the direct analysis of physiologically-derived fluids and microdialysates are presented, and a personal view of the future of CE in the clinical environment is given.     

8-epi PGF2 alpha generation during coronary reperfusion. A potential quantitative marker of oxidant stress in vivo

BACKGROUND: Myocardial reperfusion is believed to be associated with free radical injury. However, indexes of oxidative stress in vivo have been limited by their poor specificity and sensitivity. Isoprostanes are stable products of arachidonic acid formed in a nonenzymatic, free radical-catalyzed manner. We have developed a sensitive and specific assay for one of these compounds, 8-epi prostaglandin (PG) F2 alpha. METHODS AND RESULTS: To address its utility as an index of oxidative stress during coronary reperfusion, we measured urinary levels by gas chromatography/mass spectrometry in a canine model of coronary thrombolysis, in patients with acute myocardial infarction treated with thrombolytic therapy, and in patients after elective coronary artery bypass surgery. Urinary 8-epi PGF2 alpha was unchanged after circumflex artery occlusion in a canine model of coronary thrombolysis (n = 13; 437.2 +/- 56.4 versus 432.7 +/- 55.2 pmol/mmol creatinine) but increased significantly (P < .05) immediately after reperfusion (553.8 +/- 64.7 pmol/mmol). Urinary levels were increased (P < .001) in patients (n = 12) with acute myocardial infarction given lytic therapy (265.8 +/- 40.8 pmol/mmol) compared with age-matched control subjects (n = 20; 91.5 +/- 11.8 pmol/mmol) and patients with stable coronary disease (n = 20; 95.7 +/- 6.3 pmol/mmol). Preoperative levels rose from 113.2 +/- 11.8 to 248.2 +/- 86.3 pmol/mmol at 30 minutes into revascularization to 332.2 +/- 82.6 pmol/mmol by 15 minutes after global myocardial reperfusion (P < .05) and dropped to 181.2 +/- 50.4 pmol/mmol at 30 minutes and 120.2 +/- 9.9 pmol/mmol at 24 hours after bypass surgery (n = 5). Corresponding changes in spin adduct formation, found with electron paramagnetic resonance, were noted in 2 patients. CONCLUSIONS: These data support the hypothesis that free radical generation occurs during myocardial reperfusion. Measurement of isoprostane production may serve as a noninvasive index of oxidative stress.     

Long-term follow-up of a randomized post-induction therapy trial in acute myelogenous leukemia (a Southeastern Cancer Study Group trial)

A phase III clinical trial was designed to determine if more intensive induction and consolidation therapy for acute myeloblastic leukemia increases the remission rate and prolongs survival. A minor objective was to determine if the use of non-cross resistant drugs was more effective than the same drugs used for induction. Patients with untreated leukemia between the ages of 15 and 50 were given daunorubicin 45 mg/m2 for the first 3 days of a 10-day continuous infusion of cytosine arabinoside, initially at a dose of 2000 mg/m2 but reduced to 100 mg/m2 because of toxicity. Those under 36 achieving a complete remission and with an histocompatible donor were assigned to a transplant arm. The rest were randomized to receive one of three consolidation arms: A, cytosine arabinoside, 200 mg/m2 daily for 7 days and daunorubicin 45 mg/m2 daily for 3 days for three courses; B, one course as in Arm A followed by amsacrine, 120 mg/m2 daily for 5 days followed by a 5-day continuous infusion of azacytidine, 150 mg/m2/day; C, thioguanine and cytosine arabinoside, 100 mg/m2 every 12 h and daunorubicin 10 mg/m2 daily for 5 days for three courses followed by four maintenance courses of cytosine arabinoside, 100 mg/m2 daily for 5 days and daunorubicin, 45 mg/m2 for 2 days every 13 weeks. From 1981 to 1986, 398 eligible patients were enrolled and 219 achieved a complete remission. The initial induction dose of cytosine arabinoside was reduced after five of 29 patients exhibited fatal gastrointestinal toxicity. Only 11 patients were assigned to the transplant arm. There were no significant differences in the consolidation arms. The 5 year disease-free survivals were 38, 31 and 27% in arms A, B, and C respectively. Intensive consolidation therapy with the same or different drugs used in induction was as effective as lower dose consolidation followed by maintenance therapy.     

The effect of interfacial energy and phase fraction on the particle shape and the dihedral angles in two-phase small particles containing a cusp-oriented interface; computational model

The equilibrium shape and dihedral angles at the solid–liquid–vapor tri-junctions of two-phase alloy small particles containing a cusp-oriented interface were modeled as a function of phase fraction, surface energy and the interfacial energy. The calculation was applied to different combinations of surface and/or interfacial energies to demonstrate the various possible particle shapes and dihedral angles that result for two-phase particles. The dihedral angles at the tri-junction vary with the phase fraction, due to the coupling between the relative amounts of each phase, interfacial energy relative to the two surface energies and the equilibrium conditions at the tri-junction. These features can be used to find the ratio of the interfacial energy to the surface energies of two-phase particles for any state of matter.     

Design optimization of radially magnetized, iron-cored, tubular permanent-magnet machines and drive systems

In this paper we deduce, from analytical field solutions, the influence of leading design parameters on the performance of a radially magnetized, iron-cored, tubular permanent-magnet machine and its drive system. We derive analytical formulas for predicting the open-circuit electromotive force, the thrust force, the iron loss, and the winding resistance and inductances, as well as the converter losses. The force density, the machine and drive system efficiencies, and the power factor and converter volt-ampere (VA) rating are established as functions of a set of machine dimensional ratios, with due account of magnetic saturation and subject to a specified thermal constraint. We validate the utility and accuracy of the analytically derived formulas by finite-element calculations. Finally, we show that the design optimization of such a linear drive system must account for the losses and VA rating of the converter as well as the design parameters of the tubular machine.