An efficient verifiable (t,n)-threshold secret image sharing scheme with ultralight shares

Multimedia Tools and Applications - A secret sharing scheme partitions a secret into a set of shares and distributes them among the eligible participants, with each participant receiving one share...     

Synthesis,structure, CO oxidation,and H2 production activities of CaCu3−xMnxTi4−xMnxO12 (x = 0, 0.5, and 1.0)

Synthesis of nanocrystalline pristine and Mn-doped calcium copper titanate quadruple perovskites, CaCu_3?xMn_xTi_4?xMn_xO₁₂ (x = 0, 0.5, and 1.0) by modified citrate solution combustion method has been reported. Powder X-ray diffraction patterns attest the phase purity of the perovskite materials. Average particle sizes of all the materials obtained from the Scherrer's formula are in the range of 55–70 nm. The specific surface areas for all the perovskites obtained from BET isotherms are found to be low as expected for the condensed oxide systems and fall in the range of 13–17 m² g^?1. Transmission electron microscopy studies show a reduction in particle size of CaCu₃Ti₄O₁₂ with increase in Mn doping. Ca and Ti are present in +2 and +4 oxidation states in all the materials as demonstrated by X-ray photoelectron spectroscopy analyses. Cu²⁺ gets reduced in CaCu₃Ti₄O₁₂ with higher Mn content. Mn is observed to be present only in +3 oxidation state. All the materials have been examined to be active in CO oxidation as well as H₂ production from methanol steam reforming. CaCu₃Ti₄O₁₂ with ~14 at.% Mn is found to show best catalytic activities among these materials. A comprehensive analysis of the catalytic activities of these perovskites toward CO oxidation and H₂ production from MSR reveal the cooperative activity of copper-manganese in the doped perovskites and it is more effective at lower manganese content.     

Design of particle-reinforced polyurethane mould materials for soft tooling process using evolutionary multi-objective optimization algorithms

Polyurethane is used for making mould in soft tooling (ST) process for producing wax/plastic components. These wax components are later used as pattern in investment casting process. Due to low thermal conductivity of polyurethane, cooling time in ST process is long. To reduce the cooling time, thermal conductive fillers are incorporated into polyurethane to make composite mould material. However, addition of fillers affects various properties of the ST process, such as stiffness of the mould box, rendering flow-ability of melt mould material, etc. In the present work, multi-objective optimization of various conflicting objectives (namely maximization of equivalent thermal conductivity, minimization of effective modulus of elasticity, and minimization of equivalent viscosity) of composite material are conducted using evolutionary algorithms (EAs) in order to design particle-reinforced polyurethane composites by finding the optimal values of design parameters. The design parameters include volume fraction of filler content, size and shape factor of filler particle, etc. The Pareto-optimal front is targeted by solving the corresponding multi-objective problem using the NSGA-II procedure. Then, suitable multi-criterion decision-making techniques are employed to select one or a small set of the optimal solution(s) of design parameter(s) based on the higher level information of the ST process for industrial applications. Finally, the experimental study with a typical real industrial application demonstrates that the obtained optimal design parameters significantly reduce the cooling time in soft tooling process keeping other processing advantages.     

Impact of Spatial Data Availability on Climate Change Prediction in the Weyib River Basin in Ethiopia

Impact of spatial data availability on the temperature and precipitation prediction characteristics of Weyib River basin in Ethiopia has been investigated using CMIP5-CanESM2 model for the RCP8.5, RCP4.5 and RCP2.6 scenarios. The objective of the present study is to characterize how future temperatures and precipitation prediction under CMIP5-CanESM2 model output varies against diverse averaged arbitrary spatial weather stations found in the basin. The statistical downscaling model tested and verified using the observed daily data for twelve, six and three averaged arbitrary spatial weather stations as well as for a single weather station was used to predict the future climate scenarios. The results revealed that the mean annual daily maximum and minimum temperature and precipitation for twelve, six and three arbitrary spatial stations have revealed an increasing trend in the upcoming periods until the end of the century. In single station analysis, the trend itself has changed from increasing trend to decreasing trend in case of maximum and minimum temperature. In case of precipitation, no visible trend has been observed in case of single station analysis. Therefore, the variation in amount and distribution of precipitation and temperature among the four averaged spatial stations in the same study area might affect the water resources and agriculture of the basin and also instead of using a single weather station to predict future climate variables for a particular study basin, it is more reliable using averages of numerous spatial weather stations data.     

Natural rubber–ethylene‐propylene‐diene rubber covulcanization: Effect of reinforcing fillers

Filled covulcanizates of elastomer blend comprising natural rubber (NR) and ethylene‐propylene‐diene rubber (EPDM) of commercial importance were successfully prepared by using a multifunctional rubber additive; namely, bis(diisopropyl)thiophosphoryl disulfide (DIPDIS). A Two‐stage vulcanization technique further improved the physicochemical properties of the blend vulcanizates by restricting, through the formation of polar rubber bound intermediates, the migration of curative and filler from lower to highly unsaturated rubber. Scanning electron microscopy studies indicate homogeneity and coherency in the morphology of the two‐stage vulcanizates. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1001–1010, 2002; DOI 10.1002/app.10361     

Reactively compatibilised polyamide6/ethylene-co-vinyl acetate blends: mechanical properties and morphology

Mechanical properties and morphological studies of compatibilised blends of PA6/EVA-g-MA and PA6/EVA/EVA-g-MA were studied as functions of maleic anhydride content (MA) and dispersed phase (EVA-g-MA) concentrations, respectively at blending composition of 20 wt% dispersed phase (EVA-g-MA or combination of EVA and EVA-g-MA). The maleic anhydride (MA) was varied from 1 to 6 wt% in the PA6/EVA-g-MA blend, whereas MA concentration was fixed at 2 wt% in the ternary compositions with varying level of EVA-g-MA. ATR-IR spectroscopy revealed the formation of in situ copolymer during reactive compatibilisation of PA6 and EVA-g-MA. It was found that notched Izod impact strength of PA6/EVA-g-MA blends increased significantly with MA content in EVA-g-MA. The brittle to tough transition temperature of reactively compatibilised blends was found to be at 23 °C. The impact fractured surface topology reveals extensive deformation in presence of EVA-g-MA whereas; uncompatibilised PA6/EVA blend shows dislodging of EVA domains from the matrix. Tensile strength of the PA6/EVA-g-MA blends increased significantly as compared to PA6/EVA blends. Analysis of the tensile data using predictive theories showed an enhanced interaction of the dispersed phase and the matrix. It is observed from the phase morphological analysis that the average domain size of the PA6/EVA-g-MA blends is found to decrease gradually with increase in MA content of EVA-g-MA. A similar decrease is also found to observe in PA6/EVA/EVA-g-MA blends with increase in EVA-g-MA content, which suggest the coalescence process is slower in presence of EVA-g-MA. An attempt has been made to correlate between impact strength and morphological parameters with regard to the compatibilised system over the uncompatibilised system.     

33.7 MHz heavy-ion radio frequency quadrupole linac at VECC Kolkata

A 33.7 MHz heavy-ion radio frequency quadrupole (RFQ) linear accelerator has been designed, built, and tested. It is a four-rod-type RFQ designed for acceleration of 1.38 keVu, qA> or =116 ions to about 29 keVu. Transmission efficiencies of about 85% and 80% have been measured for the unanalyzed and analyzed beams, respectively, of oxygen ((16)O(2+), (16)O(3+), (16)O(4+)), nitrogen ((14)N(3+), (14)N(4+)), and argon ((40)Ar(4+)). The system design and measurements along with results of beam acceleration test will be presented.     

Surface Actuation of Lightweight Mirrors with Shape Memory Alloy

The ability to create lightweight mirrors that can maintain surface accuracy is a major technical challenge for future space telescopes. Processing-induced errors and surface errors due to temperature excursions and gravity sag (zero gravity in space) make it impossible to correct the surface of thin mirror face-sheets by conventional point actuators. The challenges are compounded by the requirements for mirrors to have adequate stiffness for pointing accuracy. An experimental and analytical study was conducted to explore the feasibility of correcting the shape of lightweight (≈1 kg/m2) mirrors using a “Nitinol” (nickel-titanium) shape memory alloy (SMA). Shape memory alloys are increasingly used as smart devices in aerospace applications. Their primary advantage over other smart materials (i.e., piezo-ceramics and piezo-polymers) is in their ability to undergo large strains and displacements and thus enable the development of smart mechanisms. Active shape correction is the only means of mitigating heat and zero-gravity-induced distortions in space-based optical imaging systems. The repeatability and reliability of a possible actuation system based on properties of the SMA wires were studied by testing the stress-strain and stress recovery behavior under controlled conditions. Embedded SMA wires were then used to actuate a composite beam, and the movement induced by actuation was monitored with the Moiré interferometry method.