Chromophore-Free Sealing and Repair of Soft Tissues Using Mid-Infrared Light-Activated Biosealants

Poor strength, infection, leakage, long procedure times, and inflammation limit the efficacy of common tissue sealing devices in surgeries and trauma. Light-activated sealing is attractive for tissue sealing and repair, and can be facilitated by the generation of local heat following absorption of nonionizing laser energy by chromophores. Here, the inherent ability of biomaterials is exploited to absorb nonionizing, mid-infrared (midIR) light in order to engender rapid photothermal sealing and repair of soft tissue wounds. In this approach, the biomaterial simultaneously acts as a photothermal convertor as well as a biosealant, which dispenses the need for exogeneous light-absorbing nanoparticles or dyes. Biomechanical recovery, mathematical modeling, histopathology analyses, tissue strain mapping using digital imaging correlation, and visualization of the biosealant-tissue interface using hyperspectral imaging indicate superior performance of midIR sealing in live mice compared to conventional sutures and glue. The midIR-biosealant approach demonstrates rapid sealing of soft tissues, improves cosmesis, lowers potential for scarring, obviates safety concerns because of the nonionizing light used, and allows adoption of a wide diversity of biomaterials. Taken together, the studies demonstrate a novel advance both in biomaterials for surgical sealing along with the use of nonionizing midIR light, with high potential for clinical translation.     

Use of recursive methods in fuzzy fault tree analysis: an aid to quantitative risk analysis

This paper demonstrates the use of recursive techniques in quantitative risk analysis when the probability of occurrence of the basic events is uncertain (fuzzy) in nature instead of having a precise value. Cases of both coherent and non-coherent fault trees with replicated events are dealt with. The analyses have been computerized using an IBM compatible personal computer (PC-AT). The source code is in C and uses Turbo-C graphics routines for creating plots. A wide variety of examples with different membership functions have been considered.     

Failure Analysis Approach to Fracture Studies in Powder Metallurgy Parts

This paper presents a failure analysis of tool steel and brass powder metallurgy (P/M) parts that failed during service. A detailed failure investigation of fractured tool steel and brass parts was carried out to assess the causes for their premature failures. The fractured surfaces of the broken pieces and the component surfaces were subjected to detailed examination. Investigations were carried out by visual methods, microhardness measurements, and using optical and scanning electron microscopes. In the case of the brass sample, visual examination of the surface indicated flat surface features. Detailed optical and electron microscopic studies corroborated by microhardness indentations have conclusively established that the failure was mainly due to the presence of very small impurities in the brass component material. In the case of the tool steel sample, the fractured surfaces of the component were subjected to destructive and nondestructive tests. Representative fractured pieces were examined visually and tested for their yield strength using simple tensile tests. Optical and scanning electron microscopies at appropriate magnifications were also performed to characterize its microstructure and fracture morphology. Detailed investigations of the tool steel part established that the failure was mainly due to inferior yield strength of the component resulting from improper heat treatment.     

Modelling and experimental investigation of devolatilizing wood in a fluidized bed combustor

A two-dimensional model is developed for the determination of devolatilization time and char yield of cylindrical wood particles in a bubbling fluidized bed combustor. By using the concept of shape factor, the model is extended to particles of cuboid shape. The model prediction of the devolatilization time agrees with the measured data (present and those reported in the literature) for cylindrical and cuboidal shaped particles within ±20% while the char yield is predicted within ±17%. Influence of some important parameters namely, thermal diffusivity, external heat transfer coefficient and shrinkage, on the devolatilization time and char yield are studied. Thermal diffusivity shows noticeable influence on devolatilization time. The external heat transfer coefficient shows little influence beyond a value of 300 W/(m² K). However particle shrinkage shows negligible effect on the devolatilization time but has a significant influence on the char yield.     

Artificial intelligence techniques and their application in oil and gas industry

Artificial Intelligence Review - Data are being continuously generated from various operational steps in the oil and gas industry. The recordings of these data and their proper utilization have...     

MODELING AND PREDICTIVE CONTROL OF MIMO NONLINEAR SYSTEMS USING WIENER-LAGUERRE MODELS

In this work, a Weiner-type nonlinear black box model was developed for capturing dynamics of open loop stable MIMO nonlinear systems with deterministic inputs. The linear dynamic component of the model was parameterized using orthogonal Laguerre filters while the nonlinear state output map was constructed either using quadratic polynomial functions or artificial neural networks. The properties of the resulting model, such as open loop stability and steady-state behavior, are discussed in detail. The identified Weiner-Laguerre model was further used to formulate a nonlinear model predictive control (NMPC) scheme. The efficacy of the proposed modeling and control scheme was demonstrated using two benchmark control problems: (a) a simulation study involving control of a continuously operated fermenter at its optimum (singular) operating point and (b) experimental verification involving control of pH at the critical point of a neutralization process. It was observed that the proposed Weiner-Laguerre model is able to capture both the dynamic and steady-state characteristics of the continuous fermenter as well as the neutralization process reasonably accurately over wide operating ranges. The proposed NMPC scheme achieved a smooth transition from a suboptimal operating point to the optimum (singular) operating point of the fermenter without causing large variation in manipulated inputs. The proposed NMPC scheme was also found to be robust in the face of moderate perturbation in the unmeasured disturbances. In the case of experimental verification using the neutralization process, the proposed control scheme was found to achieve much faster transition to a set point close to the critical point when compared to a conventional gain-scheduled PID controller.     

Effect of marangoni stresses on the deformation and coalescence in compatibilized immiscible polymer blends

The effect of physical compatibilization on the deformation and coalescence of droplets in immiscible polymer blends is discussed. Evidence is provided for the existence of concentration gradients in block copolymers along the interface during deformation. This causes complex changes in droplet shapes during deformation and relaxation. These concentration gradients also result in Marangoni stresses, which stabilize the droplets against deformation and breakup. Coalescence experiments have been performed, varying both the compatibilizer concentration and the shear rate. Existing coalescence models have been evaluated. An empirical extension of Chesters' partially mobile interface model is presented, that treats the effects of Marangoni stresses on the coalescence process as a higher effective viscosity ratio.     

Grafting of methyl methacrylate to nitrocellulose by ceric ions

Studies were carried out on grafting of various vinyl monomers to nitrocellulose by ceric ions. It was observed that graft copolymerization occurred only with methyl methacrylate (MMA) and methyl acrylate monomer. The variables such as initiator concentration, monomer concentration, time of grafting, and nitrocellulose content on grafting of MMA are discussed. By hydrolyzing away the nitrocellulose backbone, the grafted poly(methyl methacrylate) branches were isolated and the >c?o peak at 1740 cm^?1 in the infrared spectra of these isolated branches gave definite evidence of grafting. The molecular weight of isolated branches has been determined by viscometry. The probable mechanism of grafting may be at the α-carbon atom of primary alcohol or at a C₂-C₃ glycol group of the anhydro glucose unit or at the hemiacetal group of the end unit of nitrocellulose, as nitrocellulose is formed by the partial nitration of cotton cellulose.