Impact of Reservoir Permeability,Permeability Anisotropy and Designed Injection Rate on CO2 Gas Behavior in the Shallow Saline Aquifer at the CaMI Field Research Station,Brooks, Alberta

Natural Resources Research - Carbon capture and storage is part of Canada’s climate change action plan to reduce greenhouse gas emissions. The Containment and Monitoring Institute Field...     

Performance of Mortar and Chemical Grout Injection into Surrounding Soil When Slurry Pipe-jacking Method is Used

Small-diameter shallow tunnels are often being built by using the slurry pipe-jacking method. This system involves the pushing or thrusting of a drivage machine and concrete pipes into the ground. Chemical grout injection into the surrounding soil around the tunnel is carried out after the drivage and pushing processes are finished. The purpose of the chemical grout injection is to maintain permanent stability of the surrounding soil. However, the behavior of the chemical grouting material in the surrounding soil around the tunnel and the amount of optimum injection is not clearly understood. From these points of view, this paper discusses the performance of the chemical grouting material, when it is injected into the surrounding soil around the tunnel, by means of 2-D Eulerian–Lagrangian seepage analysis. Moreover, the effectiveness of the chemical grout injection was evaluated by using the non-linear finite element method. This investigation show when the range of the grouted zone is designed; it is necessary that the relationship between Young’s modulus of the soil/grouted zone and the confining stress be taken into consideration in order to establish effective, economical and safe chemical grout injection system. Understanding the performance of the seepage/dispersion behavior of the chemical grout and the characteristics of soil/ grouted zone is also important.     

Monitoring of Over Cutting Area and Lubrication Distribution in a Large Slurry Pipe Jacking Operation

Slurry pipe jacking was firmly established as a special method for the non-disruptive construction of the underground pipelines of sewage systems. Pipe jacking, in its traditional form, has occasionally been used for short railways, roads, rivers, and other projects. Basically the system involves the pushing or thrusting of concrete pipes into the ground by a number of jacks. In slurry pipe jacking, during the pushing process, mud slurry and lubricant are injected into the face and the over cutting area that is between the concrete pipes and the surrounding soil. Next, the slurry fills voids and the soil stabilizes due to the created slurry cake around the pipes. Fillings also reduce the jacking force or thrust during operation. When the drivage and pushing processes are finished, a mortar injection into the over cutting area is carried out in order to maintain permanent stability of the surrounding soil and the over cutting area. Successful lubrication around the pipes is extremely important in a large diameter slurry pipe jacking operation. Control of lubrication and gaps between pipes and soil can prevent hazards such as surface settlement and increases in thrust. Also, to find voids around the pipes after the jacking process, in order to inject mortar for permanent stabilizing, an investigation around the pipes is necessary. To meet these aims, this paper is concerned with the utilization of known methods such as the GPR (Ground Penetrating Radar) system and borehole camera to maintain control of the over cutting area and lubricant distribution around the pipes during a site investigation. From this point of view, experiments were carried out during a tunnel construction using one of the largest cases of slurry pipe jacking in Fujisawa city, Japan. The advantages and disadvantages of each system were clarified during the tests.     

Tensionless–frictionless interaction of flexible annular foundation with a transversely isotropic multi‐layered half‐space

A transversely isotropic multi‐layered half‐space, with axis of material symmetry perpendicular to the free surface, supports a flexible either annular or solid circle foundation. The contact area of the foundation and the half‐space is considered to be both frictionless and tensionless. The foundation is assumed to be affected by a vertical static axisymmetric load. Detailed analysis of the interaction of these two systems with different thickness of layers is the target of this paper. With the use of ring load Green's functions for both the foundation and the continuum half‐space, an integral equation accompanied with some inequalities is introduced to model the complex BVP. With the incorporation of ring‐shape FEM, we are capable of capturing both regular and singular solution smoothly. The validity of the combination of the analytical and numerical method is proved with comparing the results of this paper with a number of benchmark cases of both linear and nonlinear interaction of circular and annular foundation with half‐space. Some new illustrations are presented to portray the aspect of the anisotropy and layering of the half‐space. Copyright © 2014 John Wiley & Sons, Ltd.     

Application of Discriminant Analysis and Support Vector Machine in Mapping Gold Potential Areas for Further Drilling in the Sari-Gunay Gold Deposit,NW Iran

In this contribution, we used discriminant analysis (DA) and support vector machine (SVM) to model subsurface gold mineralization by using a combination of the surface soil geochemical anomalies and earlier bore data for further drilling at the Sari-Gunay gold deposit, NW Iran. Seventy percent of the data were used as the training data and the remaining 30 % were used as the testing data. Sum of the block grades, obtained by kriging, above the cutoff grade (0.5 g/t) was multiplied by the thickness of the blocks and used as productivity index (PI). Then, the PI variable was classified into three classes of background, medium, and high by using fractal method. Four classification functions of SVM and DA methods were calculated by the training soil geochemical data. Also, by using all the geochemical data and classification functions, the general extension of the gold mineralized zones was predicted. The mineral prediction models at the Sari-Gunay hill were used to locate high and moderate potential areas for further infill systematic and reconnaissance drilling, respectively. These models at Agh-Dagh hill and the area between Sari-Gunay and Agh-Dagh hills were used to define the moderate and high potential areas for further reconnaissance drilling. The results showed that the nu-SVM method with 73.8 % accuracy and c-SVM with 72.3 % accuracy worked better than DA methods.     

Analysis of soil nail walls performance - Case study

This study surveys the performance of temporary soil nail walls with a maximum height of 29.3 m in the Yas project, located in Tehran. Some numerical models, with various modelling approaches, were developed using finite element software and the proper modelling approaches were specified and verified.The modelling results were analysed and compared with the in situ monitored data. The results demonstrate the model’s horizontal deformations are generally greater than the in situ monitored values. To decrease the differences between models and monitored results, the effect of variations of the soil parameters had been surveyed and the limits of needed variations were specified.     

Determining the hard rock groundwater pathway in Golgohar complex formation using hydrochemical data in AHP

Thirty percent of present industrial water consumption of the Golgohar Iron Ore Mine (GIOM) is supplied from a hard rock well (PW-A15) and the rest from 25 wells located in 4 disconnected alluvial aquifers. This well is drilled in the metamorphic complex of Golgohar formation. Attempts have been made to develop extraction of water from other hard rocks existing in the area with no success. Therefore, extensive researches have been carried out to find the pathway, or a provision pathway of water discharged from this well. To study the hydrochemical similarity of this water with other water resources, 122 water samples from an area of 7132 km² were collected from the existing pumping wells, piezometers, mine exploration bore holes, and three salt pans in the vicinity of the area for hydrochemical analysis. The analyses were performed for concentration of major ions and some minor elements. Furthermore, the spatial distribution of ion concentration was plotted in the GIS to delineate the similarity of the PW-A15 water with other water sources and their hydrochemical neighborhood by analytical hierarchy process (AHP). The AHP was performed in two steps: first, iso-concentration maps of seven major ions, eight minor elements, and TDS were used to produce an AHP map (Map1) using weights for different hydrochemical parameters; and second, a similarity index (SI) map was prepared by performing a suggested clustering approach in SPSS using K-means clustering, which was overlaid on Map1 producing Map2. The result of AHP Map2 was then overlaid on the iso-potential map of the sampled locations in GIS software using a mask operator. Therefore, the zones having the most similarity and higher hydraulic potential than PW-A15 were nominated as the zones which possibly could recharge this well, and the groundwater (GW) pathway was proposed. The result of the study method showed to be successful and will be used as a guide for future exploration drillings.     

A near-fault probabilistic seismic hazard assessment for Yasouj,located in the Kazerun fault system,southwest Iran

Natural Hazards - The Kazerun fault system (KFS) is located in the central part of the Zagros, the most seismically active orogenic belt in the Iranian plateau. The city of Yasouj is located in the...