ZrCuAlNi系大块金属玻璃的非晶形成能力、热学和力学性能（英文）

分析ZrCuAlNi系大块金属玻璃的非晶形成能力、热学和力学性能。运用密实堆积和动态脆性指数模型从理论上确定合金的成分。采用铜模吸铸法在氩气保护下制备圆柱形和圆锥形铸锭。用X射线衍射表征圆锥形铸锭以便确定非晶结构。结果表明:两种合金的临界非晶直径为3 mm。用差示扫描量热法(DSC)分析其热行为,加热速率分别为0.5、0.67和0.83 K/s。γ参数、过冷液相区ΔT_x和约化玻璃转变温度T_(rg)等这些实验所得的参数均表明其具有高的非晶形成能力。非晶成分显示其脆性指数为40。合金的压缩试验采用的应变速率为0.016 s~(-1),得到弹性模量约为83 GPa,总应变约为5%,屈服强度为1.6 GPa,硬度为4 GPa。运用密实堆积和动态脆性指数模拟可以预测ZrCuAlNi系合金的非晶形成成分。     

由刨花金属短纤维制备技术用金属纱线

目前,德国纺织机械和高性能材料技术研究所(ITM)正对刨花金属短纤维纺制纱线的工艺过程进行广泛的调查研究。为顺利纺纱,必须考虑这类纤维的高耐磨性、高脆性和高刚性等特性,以及它们较高的塑性变形和粘滑运动倾向。基于传统成纱工艺,开发出以刨花金属短纤维为原料,经拉伸断裂、牵伸和纺纱过程制备纯金属纱线的纺纱工艺链。基于目前的研究,由刨花金属短纤维制备纯金属纱线的可行性已得以证实。所得金属纤维在高性能、低成本技术应用方面具有较高的潜力。     

可控中子孔隙度测井仪器设计

源距与屏蔽体厚度是直接影响可控中子孔隙度测井仪器测量准确性的重要参数。源距不仅影响测井仪器的测量误差，还影响测井仪器对地层孔隙度的灵敏度。屏蔽体厚度是保障测井响应完全反映地层的重要参数。从灵敏度、屏蔽率以及误差3个方面确定可控中子孔隙度测井仪器的源距与屏蔽体厚度。研究结果表明:近探测器源距越小，测井仪器灵敏度越高；近远探测器的间距对测量误差的影响随间距的增大，先减小再增大；当屏蔽率在70%以上且屏蔽率随厚度的变化较为缓慢时的屏蔽体厚度可作为屏蔽体最低厚度。     

大柳塔煤矿五盘区5-2煤层DDF2断层特征

大柳塔煤矿五盘区5-2煤层在三维地震资料解释中发现存在一条影响较大、伸展较远的断层（DDF2断层）横切5-2煤层。综合研究表明，DDF2断层为走向为东南—西北方向（111°～291°）、倾向为西南方向（201°）的高角度正断层。该断层为坳陷盆地形成后控制部分煤层沉积:在D306钻孔和D307钻孔所在区域形成时间较早，形成于5-2煤层沉积之后，结束于4-3煤层形成之后，控制5-2煤与4-3煤之间的地层沉积，为同沉积断层；该断层在D304钻孔和D305钻孔所在区域形成时间较晚，形成于4-2煤层沉积之后，结束于3-1煤层形成之后，局部控制4-2煤层与3-1煤层之间沉积，为准同生沉积断层。DDF2断层形成于东南方向，逐渐向西北方向迁移、加剧到最后尖灭。     

计及损耗的双馈感应风力发电机高电压穿越控制策略

利用换向原理分析其电磁暂态特性，在此基础上，对DFIG输出无功功率与其铜损耗的解析关系进行了理论分析，推导出了使铜损耗最低的DFIG输出无功功率最优参考值。同时，转子的瞬时功率补偿分量减小了DC总线电压的波动，从而减少了转换器的功率损耗。由此，提出了考虑DFIG铜损和转换器损耗的DFIG高电压穿越控制策略。仿真结果表明，该控制策略可以在保证DFIG高电压穿越能力的同时降低DFIG铜损耗与换流器损耗，并具有较好的暂态特性。     

Critical parameters near the ferromagnetic-paramagnetic phase transition in La0.67–xYxBa0.23Ca0.1MnO3 compounds（x=0.10 and x=0.15）

The critical properties of the mixed manganite La0.67–x Y x Ba0.23Ca0.1Mn O3 with x=0.10 and x=0.15 around the paramagnetic(PM)-ferromagnetic(FM) phase transition were investigated through various techniques. These involved modified Arrott plots, Kouvel-Fisher method and Widom scaling relation. Magnetic data, analyzed in the critical region, using the above methods, yielded the critical exponents for(x=0.10) La0.57Y0.10Ba0.23Ca0.1Mn O3(β=0.312±0.002 and γ=1.147±0.003 at T C=299.23±0.05 K). Moreover, the estimated critical exponents of(x=0.15) La0.52Y0.15Ba0.23Ca0.1Mn O3 were β=0.286±0.004 and γ=0.943±0.002 at T C=289.53±0.06 K. The critical exponents’ values were close to the theoretical values of 3D-Ising model and tricritical mean-field model. These results suggested that the present composition should be close to a tricritical point in the La0.67–x Y x Ba0.23Ca0.1Mn O3 phase diagram. Expressing the field dependence as ΔS M∝H n allowed us to establish a relationship between the exponent n and the critical exponents of the material and to propose a phenomenological universal curve for the field dependence of ΔS M.     

表面粗糙和带槽的湿式离合器接合的有限元模型

已经开发了一个有限元模型,研究表面粗糙和带槽纸质可渗透的湿式离合器的接合特性。采用有限元方法(Galerkin)离散修正雷诺和力平衡方程式,采用等参量方程式解所描述的有关内何学。通过Patir和Cheng(1978)的通用流量模型模拟表面粗糙度的影响。在表面粗糙状况下,采用Greenwond和William son(1966)方法计算负荷分配,采用开发的有限元模型研究所加负荷的影响,以及湿式离合器摩擦材料的渗透率和槽出入口尺寸的接合特性(即转矩、油压、接合时间和油膜厚度)。研究结果表明,所加负荷、摩擦材料渗透率和槽宽度对接合特性的影响显著。高的配合面压力增大了峰值和减少了接合时间但显著增大了峰值转矩,宽油槽减少峰值转矩和增加了接合时间。对于本模型油槽深度对接合特性的影响不太明显。     

既有石结构民宅外走廊重建置换的加固分析

福建省既有石结构房屋保有量大，石结构房屋由石墙、石柱、石梁和石楼板这四种石构件堆砌组成，结构抗震性能极差。石结构房屋通常设有外走廊，外走廊相对于其他部位较为独立，在地震中和其他环境振动下极易倒塌。在既有石结构房屋未进行抗震加固前，为确保外走廊安全，提出拆除外走廊石构件，采用钢筋混凝土（ＲＣ）结构重建置换的加固方法。设计与分析表明:应当尽可能地增大ＲＣ构件的刚度，以减少地震作用下石结构房屋的侧向位移；ＲＣ构件与相邻的石构件应可靠连接。外走廊ＲＣ构件重建置换的加固方法可为类似石结构民宅加固提供参考。     

Thermo-economic analysis of a direct supercritical CO2 electric power generation system using geothermal heat

A comprehensive thermo-economic model combining a geothermal heat mining system and a direct supercritical CO₂ turbine expansion electric power generation system was proposed in this paper. Assisted by this integrated model, thermo-economic and optimization analyses for the key design parameters of the whole system including the geothermal well pattern and operational conditions were performed to obtain a minimal levelized cost of electricity (LCOE). Specifically, in geothermal heat extraction simulation, an integrated wellbore-reservoir system model (T2Well/ECO2N) was used to generate a database for creating a fast, predictive, and compatible geothermal heat mining model by employing a response surface methodology. A parametric study was conducted to demonstrate the impact of turbine discharge pressure, injection and production well distance, CO₂ injection flowrate, CO₂ injection temperature, and monitored production well bottom pressure on LCOE, system thermal efficiency, and capital cost. It was found that for a 100 MW_e power plant, a minimal LCOE of $0.177/kWh was achieved for a 20-year steady operation without considering CO₂ sequestration credit. In addition, when CO₂ sequestration credit is $1.00/t, an LCOE breakeven point compared to a conventional geothermal power plant is achieved and a breakpoint for generating electric power generation at no cost was achieved for a sequestration credit of $2.05/t.     

Research of modes of electropulse processing for an intensification of processes of deformation of trumpet preparations from titanic alloys

The growing requirements to accuracy of manufacturing of details of flying devices including fromti-tanic alloys,results in substantial growth of labour input of their manufacturing.It speaks that titanic al-loys have rather low module of elasticity,high durability,resilient after removal of loading that results innecessity of performance of honing works after manufacturingfromthemdetails.Nowштамповочноеmanu-facture has progressive the equipment and new ways of punching of details …