Study of Complete Thermoelectric Generator Behavior Including Water-to-Ambient Heat Dissipation on the Cold Side

Reduction of the thermal resistances of the heat exchangers of a thermoelectric generation (TEG) system leads to a significant increase in TEG efficiency. For the cold side of a thermoelectric module (TEM), a wide range of heat exchangers have been studied, from simple finned dissipators to more complex water (water–glycol) heat exchangers. As the Nusselt number is much higher in water heat exchangers than in conventional air finned dissipators, the convective thermal resistances are better. However, to conclude which heat exchanger leads to higher efficiencies, it is necessary to include the whole system involved in the heat dissipation, i.e., the TEM-to-water heat exchanger, the water-to-ambient heat exchanger, as well as the required pumps and fans. This paper presents a dynamic computational model able to simulate the complete behavior of a TEG, including both heat exchangers. The model uses the heat transfer and hydraulic equations to compute the TEM-to-water and water-to-ambient thermal resistances, along with the resistance of the hot-side heat exchanger at different operating conditions. Likewise, the model includes all the thermoelectric effects with temperature-dependent properties. The model calculates the net power generation for different configurations, providing a methodology to design and optimize the heat exchange in order to maximize the net power generation for a wide variety of TEGs.     

A Box–Behnken Design-Based Model for Predicting Power Performance in Microbial Fuel Cells Using Wastewater

Although modeling is regarded as a useful tool to understand the performance of microbial fuel cells (MFCs), the number of MFC models remains very low compared with the number of experimental works available in the literature. Moreover, there are very few MFC modeling attempts dealing with the use of wastewater as fuel in these devices, which is essential for the practical implementation of MFCs since the potential of this technology lies in the two-fold benefit of wastewater treatment and bioenergy generation. In this work, a four-factor three-level Box–Behnken design was developed to model the electrochemical power generation in two-chamber MFCs using wastewater as fuel. The optimum values of temperature, external resistance, feed concentration and anodic pH that maximized power output were investigated. Optimum conditions were found at T = 35°C and R = 1 kΩ, corresponding to a maximum power density of 0.88 W·m^?3, while feed concentration and pH did not show statistical significance in the ranges studied. Thus, a Box–Behnken design-based model as empirical approach could provide an effective tool for the optimization study of MFC systems.     

Combined effect of antimicrobial edible coatings with reduction of initial microbial load on the shelf-life of fresh hake (Merluccius merluccius) medallions

Two distinct strategies were combined to preserve fresh fish (Merluccius merluccius) under refrigeration at 4 °C for 12 days: (i) the application of an antimicrobial edible coating enriched with oregano essential oil (OEO) or carvacrol (CV) and (ii) the reduction of initial microbial load by good handling practise and the use of sodium hypochlorite (NaOCl). The action of antimicrobial coatings alone retarded the growth of Enterobacteriaceae, lactic acid bacteria (LAB) and H₂S producing bacteria on fish samples. The reduction of initial microbial load by itself only affected the evolution of LAB, but not the rest of the bacterial groups. When using both techniques combined, edible antimicrobial coatings were significantly more effective with additional and significant delays in the growth of mesophilic, psychrotrophic and Pseudomonas bacteria. Thus, the use of both strategies combined resulted in a reduction of the counts of all bacterial groups after 12 days of storage which ranged from 1.5 log and 8 log, in Pseudomonas and H₂S producing bacteria, respectively. Moreover, no significant differences were observed when comparing the microbiological evolution of samples treated with OEO compared to those only treated with CV.     

Modeling and performance analysis of an absorption chiller with a microchannel membrane‐based absorber using LiBr‐H2O,LiCl‐H2O,and LiNO3‐NH3

In order to develop compact absorption refrigeration cycles driven by low heat sources, the simulated performance of a microchannel absorber of 5‐cm length and 9.5 cm³ in volume provided with a porous membrane is presented for 3 different solution‐refrigerant pairs: LiBr‐H₂O, LiCl‐H₂O, and LiNO₃‐NH₃. The high absorption rates calculated for the 3 solutions lead to large cooling effect to absorber volume ratios: 625 kW/m³ for the LiNO₃‐NH₃, 552 kW/m³ for the LiBr‐H₂O, and 318 kW/m³ for the LiCl‐H₂O solutions given the studied geometry. The performance of a complete absorption system is also analyzed varying the solution concentration, condensation temperature, and desorption temperature. The LiNO₃‐NH₃ and the LiBr‐H₂O solutions provide the largest cooling effects. The LiNO₃‐NH₃ can work at a lower temperature of the heating source, in comparison with the one needed in a LiBr‐H₂O system. The lowest cooling effect and coefficient of performance are found for the LiCl‐H₂O solution, but this mixture allows the use of lower temperature heating sources (below 70°C). These results can be used for the selection of the most suitable solution for a given cooling duty, depending on the available heat source and condensation temperature.     

Fluorescent polyacrylate derivate from 4-biphenylmethanol with UV-green emission

In this paper we report the synthesis of a new polyacrylate named poly(1,1?-BP4MA) which is a derivate from 4-biphenylmethanol monomer. Poly(1,1?-BP4MA) was obtained by solution and bulk polymerization techniques to yield polymers with high molecular weight and high solubility. The study of the optical properties showed that poly(1,1?-BP4MA) is a fluorescent material with emission in the UV-green region and it has similar quantum yield to tryptophan.     

Surface Defects on Semicoherent and Incoherent NaCl-Type Carbides Dispersed in Hot-Rolled Ferritic Steel

Metallurgical and Materials Transactions A - The interface structure of semicoherent titanium carbide (TiC) nanoparticles and incoherent micron-sized TiC precipitates in Fe–C–Ti alloy...