CALCULATING THE VISCOSITY OF MIXTURES BY GROUP CONTRIBUTIONS

A group contribution method for predicting the viscosity of binary and ternary liquid mixtures is proposed. Tests of the method against existing literature data show excellent agreement. Parameters for eight groups are presented.     

Think globally act locally approach for the synthesis of a liveness-enforcing supervisor of FMSs based on Petri nets

This paper, by using Petri nets (PNs), reports a general approach, called a think globally, act locally (TGAL) method, to compute liveness-enforcing supervisors (LES) for flexible manufacturing systems (FMSs) prone to deadlocks. A place called global sink/source place (GP) is introduced provisionally help us to decide a set of monitors such that deadlock states can be removed. The TGAL method proceeds with liveness enforcement by an iterative way in which a complete state enumeration is computed at each step. The resulting LES is generally maximally permissive or suboptimal, without solving intractable integer linear programming (ILP) problems. Given a system, a sufficient condition is developed to decide whether the TGAL method can find maximally permissive, that is, optimal supervisors. Several typical FMSs popularly studied in the literature are used as the examples to demonstrate the proposed method.     

3-D finite element modeling of extended single plate shear connections: Predicting the mode of failure

Twisting and lateral-torsional stability of extended shear-plate connections could be a design issue due to the relatively long distance between the weld and the bolt centroid of the shear tab, and the eccentricity between the thickness of the connection plate and web of the supported beam. The 13^th edition of the Steel Construction Manual did not include checks for determining whether or not twisting would have to be considered as a controlling design limit state. However, the current edition (i.e., the 14^th edition) provides a methodology for evaluating the need for stiffeners (also called stabilizer plates) that based on the amount of twisting of the connection plate. This paper presents the results of three-dimensional non-linear finite element analyses of a number of extended single plate connections in which the floor slab, which braces the top flange of the supported member, was incorporated. The primary goal of the reported research was to examine the need for stabilizer plates, and to investigate twist in extended shear tabs.     

Experimental investigation and CFD validation of countercurrent flow limitation (CCFL) in a large-diameter PWR hot-leg geometry

ABSTRACT

Countercurrent flow limitation (CCFL) is a phenomenon that consists of several flow patterns occurring simultaneously which produces a complex gas/liquid interface and interfacial momentum transfer, thus making it one of the most challenging two-phase flow configurations for computational fluid dynamics (CFD) validation. Numerous experimental investigations have been carried out in recent years regarding this, but most of those investigations were performed in small-diameter pipes or in non-pipe geometries (rectangular cross sections). A review of these experimental investigations has shown that the scale and geometry of the test section has a large impact upon the onset and characteristics of the CCFL. In order to provide a better understanding of this phenomenon in an actual pressurized water reactor (PWR) hot-leg geometry at a relatively large-diameter and scale, a test facility with a ～1/3.9 scale and a 190 mm inner diameter was constructed. Experiments were carried out at atmospheric pressure using water and air. High-speed recording was used to acquire high-quality images of the air/water interface. CCFL mechanisms, flow patterns, and the limits of the onset of CCFL and deflooding were experimentally identified. CFD simulations of two representative cases were carried out and assessed against experimental results. The analysis of the CFD simulations has provided insights into the improvements necessary for the accurate simulation of CCFL in large-scale geometries.     

Transmission Range-Aware Clustering for Green Cognitive Radio Ad Hoc Networks

The absence of network infrastructure and opportunistic spectrum access in cognitive radio ad hoc networks (CRAHNs) results in connectivity and stability problems. Clustering is known as an effective technique to overcome this problem. Clustering improves network performance by implementing a logical network backbone. Therefore, how to efficiently construct this backbone among CRAHNs is of interest. In this paper, we propose a new clustering algorithm for CRAHNs. Moreover, we model a novel cluster head selection function based on the channel heterogeneity in term of transmission ranges. To the best of our knowledge, this is the first attempt to model the channel heterogeneity into the clustering formation in cognitive radio networks. Simulation results show that the performance of clustering is significantly improved by the channel heterogeneity considerations.     

NDVI response to rainfall in different ecological zones in Jordan

The response of NDVI to rainfall was analyzed using NOAA/AVHRR satellite imagery acquired over a time period of ten growing seasons (1981 to 1992) and rainfall data from 16 weather stations in four ecological zones in Jordan. Results of linear regression analysis showed better response of NDVI to cumulative rainfall than to 10-day rainfall with best correlation in the Mediterranean zone. Significant relationships were found between seasonal rainfall and NDVI range (Δ_NDVI) with better correlations for logarithmic and power relationships than for linear relationship. A strong linear relationship occurred between the annual rainfall and end-of-season NDVI in the Mediterranean zone and weak or no correlation in other zones. The correlations were improved when the rainfall data were averaged, summed and correlated with the average NDVI. More agreement, however, was observed between the maximum NDVI image and rainfall than for the average NDVI image and rainfall. Results also showed that stratification of the data according to soil type and/or land cover would not necessarily improve the correlation. However, stratification of the data according to ecological zone demonstrated obvious differences between the NDVI-rainfall in the different zones.     

Growth of Highly Anisotropic 2D Ternary CaTe2O5 Flakes on Molten Glass

Two‐dimensional (2D) ternary compounds (2DTCs) have attracted intensive attention due to the new degree of freedom of modulating physical and chemical properties. However, the controllable synthesis of 2DTCs still remains a great challenge impeding further research and applications. Here, for the first time, ultrathin (≈7.4 nm) ε‐CaTe₂O₅ flakes with high anisotropy are obtained by a chemical vapor deposition method using soda‐lime glass as the capture substrate. The molten glass adsorbs Te vapor in the gas flow to its surface, which reacts with CaO in the molten substrate leading to the precipitation of ε‐CaTe₂O₅. Interestingly, ε‐CaTe₂O₅ flakes display highly anisotropic band structures and optical properties. Furthermore, low‐temperature electrical measurements show that the metal–semiconductor/insulator transition of ε‐CaTe₂O₅ is exhibited at about 130 K, and optical phonon assisted hopping of small polarons becomes dominant within the temperature range of 130–300 K. Employing soda‐lime glass as the capture substrate may provide a new approach for the synthesis of 2DTCs.     

Investigation of the M2/G2/1/∞,N queue with restricted admission of priority customers and its application to HSDPA mobile systems

This paper investigates a queuing system for QoS optimization of multimedia traffic consisting of aggregated streams with diverse QoS requirements transmitted to a mobile terminal over a common downlink shared channel. The queuing system, proposed for buffer management of aggregated single-user traffic in the base station of High-Speed Downlink Packet Access (HSDPA), allows for optimum loss/delay/jitter performance for end-user multimedia traffic with delay-tolerant non-real-time streams and partially loss tolerant real-time streams. In the queuing system, the real-time stream has non-preemptive priority in service but the number of the packets in the system is restricted by a constant. The non-real-time stream has no service priority but is allowed unlimited access to the system. Both types of packets arrive in the stationary Poisson flow. Service times follow general distribution depending on the packet type. Stability condition for the model is derived. Queue length distribution for both types of customers is calculated at arbitrary epochs and service completion epochs. Loss probability for priority packets is computed. Waiting time distribution in terms of Laplace–Stieltjes transform is obtained for both types of packets. Mean waiting time and jitter are computed. Numerical examples presented demonstrate the effectiveness of the queuing system for QoS optimization of buffered end-user multimedia traffic with aggregated real-time and non-real-time streams.     

Social Loafing in Technology-Supported Teams

This study examines the occurrence of social loafing in technology-supported teams along with methods for diminishing loafing. A controlled laboratory experiment with a 3 × 2 × 2 factorial design is used. The independent variables – feedback, anonymity, and group size – are manipulated experimentally. It was expected that social loafing – a widely observed phenomenon – would indeed occur in technology supported teams. It was also expected that the traditional means of reducing social loafing (i.e., identifiability and feedback) within physical work environments would also have similar effects within technology-supported work environments. As expected, social loafing is found to occur in teams operating in a technology-driven realm. An unexpected finding is that social loafing is measurable only when participants are provided self-feedback. While other forms of feedback have a positive influence on productivity, they fail to reduce this phenomenon, and identifiability of group members is found to have no observable effect on social loafing. Computer Supported Cooperative Work.     

Hybrid organosiloxane material/metal oxide composite as efficient anticorrosive coatings for mild steel in a saline medium

Hybrid sol–gel materials have been found very promising anticorrosive coatings for metal substrates. In this article, the synthesis of novel hybrid organic‐inorganic sol–gel polymer; starting from tetraethyl orthosilicate, (3‐aminopropyl) trimethoxysilane, dimethoxy‐methyl‐octadecylsilane and polydimethylsiloxane, silanol terminated precursors, is reported. The hybrid polymer has been further loaded individually as well with five different metal oxides, then deposited on mild steel panels. All cured coating formulations have been characterized using thermogravimetric analysis, contact angle measurements, electrochemical impedance spectroscopy, vicker‐microhardness, surface roughness, and critical load analyses. Results have revealed that the parent coating exhibits excellent thermal stability and hydrophobic nature with minor observed changes on the two properties for the metal oxide‐loaded coatings. Electrochemical impedance and visual inspection results indicated excellent corrosion protection performance for all metal oxide composite coatings (except magnesium oxide) on steel when immersed in 3.5% NaCl solution for a prolonged time. Furthermore, the coating containing molybdenum oxide exhibited a maximum hardness, homogeneity, and adherence to the steel surface. The developed coating formulations in this study can be considered as a promising alternative to the currently‐used toxic chromate and phosphate coatings. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 134, 46718