Eco-friendly approach for preparation of hybrid silica aerogel via freeze drying method

Journal of Materials Science - In this paper, an eco-friendly method of producing hybrid silica aerogels by freeze-drying method (FD) is proposed. In the freeze-drying system, deionized water was...     

有机元素检测仪器在石油化工行业的需求和应用现状

本文通过对国内外石油及石化产品分析检测相关标准技术的调研与收集,以及相关检测仪器特点的分析,对目前包括润滑油、汽油、柴油、煤油、石蜡、石化聚合物、原油等样品类型,共计80个样品在现有仪器上进行测试,使用标准方法对样品中碳、氢、氮、硫元素进行检测,获取样品的检测时间、含量结果、仪器条件等参数,为相关仪器检测提供数据基础.     

Preparation of transparent BaSO4 nanodispersions by high-gravity reactive precipitation combined with surface modification for transparent X-ray shielding nanocomposite films

BaSO₄ nanoparticles as important functional materials have attracted considerable research interests, due to their X-rays barrier and absorption properties. However, most of BaSO₄ nanoparticles prepared by traditional technology are nanopowders with broad size distribution and poor dispersibility, which may greatly limit their applications. To the best of our knowledge, the synthesis of transparent BaSO₄ nanodispersions was rarely reported. Here, we firstly present a novel and efficient method to prepare transparent and stable BaSO₄ nanodispersions with a relatively small particle size around 10 to 17 nm using a precipitation method in a rotating packed bed (RPB), followed by a modification treatment using stearic acid. Compared with the BaSO₄ prepared in a traditional stirred tank, the product prepared using an RPB has much smaller particle size and narrower size distribution. More importantly, by using RPB, the reaction time can be significantly decreased from 20 min to 18 s. Furthermore, the transparent BaSO₄-polyvinyl butyral nanocomposite films with good X-ray shielding performance can be easily fabricated. We believe that the stable BaSO₄ nanodispersions may have a wide range of applications for transparent composite materials and coatings with X-ray shielding performance for future research.     

Effects of the joining process on the microstructure and properties of liquid-phase-sintered SiC-SiC joints formed with Ti foil

The joining of liquid-phase sintered SiC (LPS-SiC) ceramics was conducted using spark plasma sintering (SPS), through solid state diffusion bonding, with Ti-metal foil as a joining interlayer. Samples were joined at 1400 °C, under applied pressures of either 10 or 30 MPa, and with different atmospheres (argon, Ar, vs. vacuum). It was demonstrated that the shear strength of the joints increased with an increase in the applied joining pressure. The joining atmosphere also affected on both the microstructure and shear strength of the SiC joints. The composition and microstructure of the interlayer were examined to understand the mechanism. As a result, a SiC-SiC joining with a good mechanical performance could be achieved under an Ar environment, which in turn could provide a cost-effective approach and greatly widen the applications of SiC ceramic components with complex shape.     

糙米干法和湿法微粉碎对面团及面包品质的影响

将糙米分别进行干法和湿法微粉碎,与谷朊粉以4:1比例混合,制备糙米面团和面包,研究干法和湿法微粉碎对糙米面团和面包品质的影响。结果表明,经干法和湿法微粉碎后糙米粉颗粒细度显著降低,湿法粉碎糙米粉破损淀粉含量较少。干法粉碎糙米粉面团结构致密,弹性和黏性升高,糙米面包比容降低,硬度和耐咀性增强,弹性降低。随着粉碎时间的延长,湿法粉碎糙米粉-谷朊粉面团的黏性和弹性先升高后降低,面团网络结构更加紧密,其面包的比容与黏性和弹性变化规律一致,面包耐咀性和硬度增加,弹性降低。干法粉碎15 min(微粉A),湿法粉碎40 min(微粉X)时,糙米面包的比容最大,硬度和弹性适中,面包的品质较好。     

位阻胺选择性配方溶剂尾气处理装置工业应用

为了解决常规甲基二乙醇胺(MDEA)脱硫溶剂在低压下脱硫效果不理想,导致排放尾气中SO_2浓度升高的问题,利用位阻胺与H_2S反应具有良好活性、同时能较好抑制位阻胺与CO_2反应的特点,研究开发出了位阻胺选择性脱硫配方溶剂,并在处理量为1×10~4m~3/d的装置上进行中间放大试验的基础上,在中国石油西南油气田公司川中油气矿龙岗天然气净化厂硫磺回收加氢尾气脱硫装置上进行了工业应用。在工业应用期间,考察了溶剂在不同吸收塔板数、不同贫液入塔温度、不同溶液循环量等条件下的吸收性能,还考察了脱硫溶液的再生性能,确定了较适宜的工艺操作参数。应用1年后的考核结果表明:(1)该位阻胺选择性脱硫配方溶剂在进尾气脱硫吸收塔气体中H_2S含量为0.77%～3.96%、CO_2含量为23.91%～32.79%的气质条件下,可使净化尾气中H_2S含量低于30 mg/m~3;(2)与装置原用的常规MDEA相比,净化尾气中H_2S含量降低58.45%;(3)该位阻胺选择性脱硫配方溶剂的再生性能良好,再生后贫液中H_2S和CO_2含量均小于0.12 g/L。     

智能车弯道行进算法的研究与实现

智能车在弯道处快速、平稳、准确的行进是循迹行进的关键问题。基于此提出了一种基于CCD摄像头进行路径识别的智能车分阶段全闭环控制方法,智能车在行进中依据导航线的曲率进行直道和弯道的辨识,并在直道和弯道部分采用不同的控制方法,实现弯道提前减速,直道加速通过,在直道与弯道的行进中均采用全闭环控制。视觉系统通过CCD摄像头提取路径中的导航线并计算导航线曲率以及智能车相对于导航线的平行偏移值和航向角偏差;主控系统依据导航线曲率选取控制策略,根据平行偏移值和航向角偏差计算转向角度与行进速度并通过控制执行机构完成转向与速度调节,控制结果通过视觉系统与测速装置反馈给主控系统,实现全闭环控制。以第十五届全国大学生机器人大赛为背景搭建实验系统,经过多次的调试与实验,智能车在赛道上最大运行速度可达3.5 m/s,全程平均速度约为2.8 m/s,实际测得最大偏离距离为35 mm,在允许误差范围之内。通过实际的实验系统,验证了智能车分阶段全闭环控制算法的可行性。     

LDV measurements of particle velocity distribution in an annular stripper

Particle descent velocities in an annular stripper were measured by a laser Doppler velocimetry (LDV) system. In the radial direction, particle descent velocity was relatively constant in the mid-region of the stripper and increased towards the walls on both sides, exhibiting an anti-U-shaped distribution. Particle descent velocity in the radial mid-region increased with the increase of superficial gas velocity, and the maximum in the outer wall region increased significantly with the increase of solid mass flux. Superficial stripping gas velocity had stronger effect on particle velocity distributions near the stripper gas distributor, and such effect weakened with the increase of the distance from the distributor. Local particle velocity and its radial profiles could be adjusted by changing the superficial stripping gas velocity. Empirical formulas were established to describe the relationships between the local particle velocity and cross-sectional averaged velocity based on the effects of operating conditions and measuring positions. The result showed that the predicted data was in good agreement with the experimental value.