蒙特卡罗模拟在区域地震滑坡灾害评价中应用

2004年10月23日,日本新泻中越地区发生史上最强地震之一,震级达到Mw6.6。这次地震诱发上千个规模大小不一、形式各样的滑坡,造成一定的灾害损失和人员伤亡。因此,为了有效地避免和减轻这方面的灾害,有必要有效地、科学地预测和评价地震诱发滑坡的空间发生规律。为此以一定的地区作为研究对象,提出了蒙特卡罗随机模拟和Newmark滑动体位移分析法在区域地震斜坡失稳概率分析中的应用。该法充分考虑到岩土参数和相关地震参数空间变异性,结合地理信息系统空间分析的优势,以网格模型为基础,分析该区斜坡滑动体位移分布规律,并以2cm为失稳临界值探讨网格斜坡破坏的概率。实例证明,所提出的模型有效地预测了滑坡发生的空间分布规律。     

Time probabilistic evaluation of seismically induced landslide hazard in Irpinia (Southern Italy)

A recently proposed method, which incorporates the Newmark model to evaluate the earthquake-induced landslide hazard at regional scale, was applied to Irpinia, one of the most seismically active regions of Italy. The method adopts a probabilistic approach to calculate values of critical acceleration a_c representing the minimum strength required for a slope not to fail at a fixed probability level in a given time interval. Regional probabilistic hazard maps were generated for the two failure types most common in Irpinia (slump–earthflows and rock falls). The results suggest that quite moderate critical acceleration (0.05–0.08 g) could suffice to keep the slope failure probability low. However, the available data indicate that potential slide surfaces with a_c below these values could be common in Irpinia, where, perhaps in relation to particular geo-environmental conditions, a relative large number of marginally stable slopes might survive other destabilising actions and fail even on occasion of not particularly strong earthquake shaking.     

实时子结构混合试验中的数值积分方法对比分析

将CR方法运用到振动台子结构混合试验中,并结合作动器的时滞和外插时滞补偿方法进行了研究.文中将改造的中心差分法、改造的算子分解法、改造的Chang方法、改造的显式Newmark方法均与CR方法进行了对比分析.结果表明,改造的算子分解法的稳定性最差,当不考虑阻尼影响时改造的显式Newmark方法的稳定界限为2,改造的中心...     

Study on a failed dip slope with a thin sandy layer in 2004 Niigata-ken Chuetsu Earthquake

Among the extensive failed slopes in the 2004 Niigata-ken Chuetsu Earthquake, Japan, a dip slope at Yokowatashi, Ojiya, was investigated intensively. The sliding plane was along a weak thin tuff sandy layer which had been deeply weathered. Triaxial compression tests and plane strain compression tests were performed on undisturbed specimens obtained by block sampling and boring sampling to evaluate the strength that was mobilized on the sliding plane. Stability analysis based on the test results reveals that, at normal time, without earthquake and without an extremely high groundwater level, the slope is stable. Furthermore, the calculation of earthquake-induced displacement provides a reasonable simulation of the failure of this slope.     

刍议纽马克翻译理论在高职高专英语翻译教学中的运用．

本文笔者运用纽马克翻译理论,根据《高职高专教育英语课程教学基本要求》（试行）,阐述了如何在教学中灵活运用理论,进行英译汉实践操作。     

Dynamic high order numerical manifold method based on weighted residual method

High Order Numerical Manifold Method (HONMM) is a powerful method to solve static problems. A development of HONMM to achieve a dynamic solution with high accuracy and less computational cost is addressed in the current paper. In the developed method, the global approximation is obtained through increasing the order of local approximation functions without any Linear Dependence (LD) of the unknowns. The weighted residual formulations are modified to be used in dynamic high order simulation. Moreover, a modified Newmark method formulation is adjusted for time integration of high order equations. The superiority of the proposed method over the conventional NMM is demonstrated through a special beam example. The dynamic free fall block example is used to exhibit the removal of mass matrix singularity. As cases of dynamic analysis, beam free and forced vibrations are illustrated which include a moving load. Finally, a non‐uniform cross‐section beam under dynamic variable loads with accelerated motion is solved while demonstrating the capability of the new method such as simplicity, accuracy and time efficiency for simulation of complex dynamic problems. Copyright © 2014 John Wiley & Sons, Ltd.     

Non‐linear dynamic analyses by meshless local Petrov–Galerkin formulations

In this work, meshless methods based on the local Petrov–Galerkin approach are proposed for the solution of dynamic problems considering elastic and elastoplastic materials. Formulations adopting the Heaviside step function and the Gaussian weight function as the test functions in the local weak form are considered. The moving least‐square method is used for the approximation of physical quantities in the local integral equations. After spatial discretization is carried out, a non‐linear system of ordinary differential equations of second order is obtained. This system is solved by Newmark/Newton–Raphson techniques. At the end of the paper numerical results are presented, illustrating the potentialities of the proposed methodologies. Copyright © 2009 John Wiley & Sons, Ltd.     

一种动力响应混合快速分析方法及其在功能梯度材料板瞬态响应分析中的应用

提出了一种把减基法嵌套在Newmark法中快速求解动力问题的混合算法.这种算法把Newmark法作为动力问题的基本求解器.而在嵌套减基法时,把参数样本空间对应的解集做成一个训练空间,采用贪婪算法进行减基空间基向量的自适应选取,进而由减基空间得到减缩系统.通过求解减缩系统对应的Newmark增量式来达到快速求解动力问题的目的.最后采用了一个无限大的功能梯度材料板的瞬态响应分析来验证文中方法的高效性和精确性.     

ELASTIC DYNAMIC ANALYSIS OF MODERATELY THICK PLATE USING MESHLESS LRPIM

A meshless local radial point interpolation method （LRPIM） for solving elastic dy-namic problems of moderately thick plates is presented in this paper. The discretized system equation of the plate is obtained using a locally weighted residual method. It uses a radial basis function （RBF） coupled with a polynomial basis function as a trial function,and uses the quartic spline function as a test function of the weighted residual method. The shape function has the properties of the Kronecker delta function,and no additional treatment is done to impose essen-tial boundary conditions. The Newmark method for solving the dynamic problem is adopted in computation. Effects of sizes of the quadrature sub-domain and influence domain on the dynamic properties are investigated. The numerical results show that the presented method can give quite accurate results for the elastic dynamic problem of the moderately thick plate.     

基于极限分析的边坡实时动态Newmark滑块位移法

 Newmark滑块位移法常被用于计算边坡的震后位移,但其计算过程所使用的均为边坡失稳瞬间状态的参数,并未考虑到滑坡体在地震时程中不断变形下滑所引起的参数变化。基于极限分析原理,考虑滑坡体下滑转角对各做功功率以及边坡几何参数的影响,推导了边坡实时屈服加速度系数、实时角加速度以及震后水平位移的计算表达式;使用Matlab编程并以地震波记录时间间隔为单位对滑坡体的动态参数进行实时更新,实现了实时动态的Newmark滑块位移法计算过程;将该方法应用于典型边坡算例中,并与传统的Newmark滑块位移法进行了对比。结果表明：边坡实时屈服加速度系数会随着滑坡体转角的增大而增大,考虑实时动态效应的边坡震后位移比不考虑的结果要小,且两者之间的差异会随着边坡整体稳定性的提高而逐渐减小。该方法弥补了传统Newmark滑块位移法应用中忽略实时动态效应的不足,其成果可为相关边坡的抗震设计与震后变形计算提供新的参考。